Servlet.Host.Not.Found=SRVE0079E: Servlet host not found No servlet host found. Verify that the virtual hosts are defined in the virtualhosts.xml. Illegal.Argument:.Invalid.ObjectPool.Instantiated.=SRVE0109E: Illegal Argument Exception: Invalid ObjectPool instantiated. This is an internal system error and is probably caused by an earlier failure. Examine the server logs in order to determine the root cause of the problem. If there are no related messages or they do not help to resolve the problem, contact IBM Support. Unabled.to.load.admin.config..The.initial.configuration.will.not.be.created.=SRVE0104E: Unable to load administrative configuration. The initial configuration will not be created Internal server error. Gather logs and contact IBM service. Bootstrap.server.caught.an.exception.{0}=NMSV0001W: Bootstrap server caught an exception {0} This exception is unexpected. The cause is not immediately known. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . Failed.to.create.tables.{0}=NMSV0007W: Failed to create tables {0} This exception is unexpected. The cause is not immediately known. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . Caught.an.exception:.InvalidServantException=NMSV0006E: Caught an exception: InvalidServantException This exception is unexpected. The cause is not immediately known. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . web.container.servlet.spec.level=SRVE0162I: Servlet Specification Level: 2.3 The servlet specification level supported by the application server. No action is required. postInvoke.Security.Exception.=SRVE0138E: postInvoke Security Exception Security problem encountered during request processing. Examine the server logs in order to determine the root cause of the problem. If there are no related messages or they do not help to resolve the problem, contact IBM Support. Class.Cast.Exception:.Input.class.does.not.implement.IPoolable.=SRVE0057E: Class Cast Exception: Input class does not implement IPoolable Input class is not poolable. Implement the IPoolable interface in the input class. started.Default.Server=SRVE0081I: Started Default Server This message is for informational purposes only. No action is required. Total.Read.equals.zero=SRVE0040W: Total read equals zero Total read equals zero. Examine the server logs in order to determine the root cause of the problem. If there are no related messages or they do not help to resolve the problem, contact IBM Support. Error.loading.ServletEngineInfo:.{0}=SRVE0094E: Error loading ServletEngineInfo: {0} This is an internal system error and is probably caused by an earlier failure. Examine the server logs in order to determine the root cause of the problem. If there are no related messages or they do not help to resolve the problem, contact IBM Support. Illegal.Argument:.Invalid.Header.Format=SRVE0016E: Illegal Argument Exception: Invalid header format Invalid format found for a request header. Check client header creation. Failed.to.create.distributed.attribute.list..Attributes.will.not.be.shared.across.clones=SRVE0110E: Failure to create distributed attribute list. Attributes will not be shared across clones Failure to create distributed attribute list. Examine the server logs in order to determine the root cause of the problem. If there are no related messages or they do not help to resolve the problem, contact IBM Support. no.such.servlethost:.[{0}]=SRVE0122W: No such servlet host: [{0}] The specified servlet host could not be found. Be sure the virtual host specifications in virtualhosts.xml are valid. Failed.to.retrieve.attribute.names=SRVE0071E: Failed to retrieve attribute names Internal web container error. Gather server logs and contact IBM service. MalformedXMLInfoException:.Unsupported.attribute.type:.{0}=SRVE0074E: MalformedXMLInfoException: Unsupported attribute type: {0} The specified attribute is not supported. Remove the attribute from any XML file that contains it. Error.during.destroy=SRVE0047E: An error occurred during destroy An error occurred during a servlet destroy. Examine the server logs in order to determine the root cause of the problem. If there are no related messages or they do not help to resolve the problem, contact IBM Support. Error.Parsing.Parameters=SRVE0133E: An error occurred while parsing parameters. {0} Problem encountered parsing servlet parameters. Check parameter definitions in the web.xml file. Uncaught.init().exception.thrown.by.servlet.{0}:.{1}=SRVE0100E: Did not realize init() exception thrown by servlet {0}: {1} Could not initialize the specified servlet. Make sure the servlet class file is available on the application classpath. Unable.to.bind.hostname.[{0}].to.servletHost.[{1}]=SRVE0060E: Unable to bind host name [{0}] to servletHost [{1}] Could not bind the specified host name to the specified serlvet host. Make sure the host name has been specified correctly and that the servlet host has been specified in virtualhosts.xml. Illegal.Argument:.ScriptName.must.be.the.first.part.of.the.URI=SRVE0103E: Illegal Argument Exception: ScriptName must be the first part of the URI This is an internal system error and is probably caused by an earlier failure. Examine the server logs in order to determine the root cause of the problem. If there are no related messages or they do not help to resolve the problem, contact IBM Support. No.certificates=PLGN0024E: No certificates {0} This error occured because of a bad or missing X.509 certificate. Check the logs for the exception to see the exact trace. Regenerate or obtain a new certificate if the error persists. Loading.servlet:.{0}=SRVE0048I: Loading servlet: {0} The specified servlet is being loaded for service. No user action is required. Illegal.Argument:.Missing.Resource.Bootstrap.Properties=SRVE0086E: Illegal Argument Exception: Missing resource bootstrap properties Internal server error. Gather logs and contact IBM service. [Servlet.Error]-[{0}]:.{1}:.{2}=SRVE0020E: [Servlet Error]-[{0}]: {1}: {2} An error was encountered in the specified servlet. Varies by reported cause. Error.Invoking.Servlet.{0}=SRVE0039E: Error Invoking Servlet {0} Problem invoking the specified servlet. Be sure the servlet is defined and accessible. error.reading.module.resource=SRVE0150E: An error occurred reading the Web Module resource. The Web Application will not be loaded. Problem encountered reading the web module definition for the web application. Examine the server logs in order to determine the root cause of the problem. If there are no related messages or they do not help to resolve the problem, contact IBM Support. Unabled.to.export.RemoteSRP.Connection.Object=SRVE0114E: Unable to export RemoteSRP Connection Object This is an internal system error and is probably caused by an earlier failure. Examine the server logs in order to determine the root cause of the problem. If there are no related messages or they do not help to resolve the problem, contact IBM Support. Could.not.find.resource./iiopredirector.xml=SRVE0082E: Could not find resource /iiopredirector.xml Could not find the specified resource. Be sure the resource exists. Unable.to.remove.remote.attribute.named:.{0}=SRVE0106E: Unable to remove remote attribute named: {0} Unable to remove the specified remote attribute. Potentially a network problem. Wait and try again. IO.Error=SRVE0120E: IO Error {0} IO error encountered. Varies depending on reported root cause. Transport.Exception=SRVE0072E: Transport Exception Exception received in http transport. Examine the server logs in order to determine the root cause of the problem. If there are no related messages or they do not help to resolve the problem, contact IBM Support. [Servlet.LOG]:.{0}=SRVE0091I: [Servlet LOG]: {0} This message is for informational purposes only. No action is required. servlet.mapping.without.servlet=SRVE0141E: Encountered a servlet mapping without a corresponding servlet: {0}. Please check the deployment descriptor Servlet mapping defined with the specified servlet, but servlet was not defined. Make sure the servlet is defined in the web.xml file. Error.creating.queue.properties/rules.properties=SRVE0025E: Error creating queue.properties/rules.properties This is an internal system error and is probably caused by an earlier failure. Examine the server logs in order to determine the root cause of the problem. If there are no related messages or they do not help to resolve the problem, contact IBM Support. IllegalStateException:.No.Target.Set=SRVE0067E: IllegalStateException: No Target Set This is an internal system error and is probably caused by an earlier failure. Examine the server logs in order to determine the root cause of the problem. If there are no related messages or they do not help to resolve the problem, contact IBM Support. invalid.ose.type=SRVE0145E: Unknown OSE transport link type {0} This is an internal system error and is probably caused by an earlier failure. Examine the server logs in order to determine the root cause of the problem. If there are no related messages or they do not help to resolve the problem, contact IBM Support. failed.to.get.context.path=SRVE0158E: Failed to obtain the Context Path for the Web Application Could not determine the context path for a web application. Be sure a context path has been defined for the web application in the application.xml file. The.serializeObject.method.failed=NMSV0008W: The serializeObject method failed This exception is unexpected. The cause is not immediately known. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . preInvoke.Security.Exception.=SRVE0139E: Exception in Security preInvoke {0} Security problem encountered during request processing. Varies with root cause. Engine.Exception=PLGN0004E: Engine exception This is a Web Container exception which can be caused by one of three things: 1. An error occured while preinvoking the security collaborator. 2. An error occured while processing the server connection. 3. An error occured while processing the servlet request. Examine the server logs to determine the root cause of the problem. Servlet.Not.Found.Exception:.{0}=SRVE0090E: Servlet Not Found Exception: {0} The specified servlet could not be found. Make sure the servlet exists and is defined properly in the web.xml file. session.manager.configured=SRVE0167I: Session Manager is Configured - Initializing... This message is for informational purposes only. No action is required. Engine.Throwable=PLGN0007E: Engine Throwable This is a Web Container exception which can be caused by one of three things: 1. An error occured while preinvoking the security collaborator. 2. An error occured while processing the server connection. 3. An error occured while processing the servlet request. Examine the server logs in order to determine the root cause of the problem. If there are no related messages or they do not help to resolve the problem, contact IBM Support. [{0}][{1}][Servlet.LOG]:.{2}:.{3}=SRVE0181I: [{0}] [{1}] [Servlet.LOG]: {2}: {3} This message is for informational purposes only. No action is required. The.deserializeObject.method.caught.ClassNotFound.exception:.{0}=NMSV0004W: The deserializeObject method caught ClassNotFound exception: {0} This exception is unexpected. The cause is not immediately known. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . Illegal.Argument:.{0}.is.not.a.directory.=SRVE0031E: Illegal Argument Exception: {0} is not a directory. The specified path is not a directory. Make sure the directory exists or that you are requesting the right directory. Web.Group.Not.Found:.{0}=SRVE0017W: Web Group not found: {0} Could not find the specified web group (web module). Be sure the web group is defined and deployed. Also check to be sure that a host and port have been defined for your virtual hosts and that there are no host/port conflicts across your virtual hosts. namespace.number.format.exception=SRVE0143W: NumberFormatException in String value for {0} environment entry {1} {2} Number format problem in the specified environment entry. Correct the environment entry. Invalidation.Exception:.JarFileClassProvider.is.invalid..File.has.been.updated=SRVE0045W: Invalidation Exception: JarFileClassProvider is invalid. File has been updated JarFileClassProvider is invalid. File has been updated. Examine the server logs in order to determine the root cause of the problem. If there are no related messages or they do not help to resolve the problem, contact IBM Support. Closing.queue=PLGN0020W: Closing.queue Problems occured when closing the server queue. Examine server logs for exceptions. Unabled.to.locate.a.matching.Virtual.Host:.{0}=SRVE0022E: Unable to locate a matching Virtual Host: {0} Could not find a definition for the specified virtual host. Verify that the virtual host is defined in the virtualhosts.xml file. Error.Loading.Session.Context.and.Web.Application=SRVE0054E: An error occurred while loading Web application This is an internal system error and is probably caused by an earlier failure. Examine the server logs in order to determine the root cause of the problem. If there are no related messages or they do not help to resolve the problem, contact IBM Support. Cred.buffer.error.=PLGN0005E: Cred buffer error. This is a transport error which occurs when bad data has been encountered. If this problem persists, check the transport configuration that is associated with the transport that is causing the error. Failed.to.remove.attribute=SRVE0087E: Failed to remove attribute Could not remove an attribute. The attribute might not have been present. Be sure attribute exists and retry. Unabled.to.Create.RemoteSRP.Bean=SRVE0093E: Unable to create RemoteSRP Bean This is an internal system error and is probably caused by an earlier failure. Examine the server logs in order to determine the root cause of the problem. If there are no related messages or they do not help to resolve the problem, contact IBM Support. Error.occurred.while.invoking.error.reporter=SRVE0115E: Error occurred while invoking error reporter {0} Problem invoking the specified error reporter. Examine the server logs in order to determine the root cause of the problem. If there are no related messages or they do not help to resolve the problem, contact IBM Support. Invalid.Content.Length=SRVE0080E: Invalid content length Internal server error. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . Could.not.find.resource.iiopredirector.xml.on.the.classpath=SRVE0116E: Could not find resource iiopredirector.xml on the classpath This is an internal system error and is probably caused by an earlier failure. Examine the server logs in order to determine the root cause of the problem. If there are no related messages or they do not help to resolve the problem, contact IBM Support. Unabled.to.Shutdown.Host=SRVE0029E: Unable to shutdown host Could not shutdown server. Examine the server logs in order to determine the root cause of the problem. If there are no related messages or they do not help to resolve the problem, contact IBM Support. IO.Error:.Invalid.Content.Length=SRVE0132E: IO Error: Invalid content length The content length is not valid. Examine the server logs in order to determine the root cause of the problem. If there are no related messages or they do not help to resolve the problem, contact IBM Support. Invalidation.Exception:.{0}.was.created=SRVE0126E: Invalidation Exception: {0} was created This is an internal system error and is probably caused by an earlier failure. Examine the server logs in order to determine the root cause of the problem. If there are no related messages or they do not help to resolve the problem, contact IBM Support. duplicate.context.root=PLGN0062W: The plugin configuration generator encountered a duplicate context root: {0}. Applications with duplicate context roots may not run correctly. This error occured because two installed applications were found to have the same context root (path). This may lead to indeterminate behaviour. One of the applications will need to be uninstalled, and then reinstalled using a different context root. If for some reason itis not possible to uninstall and reinstall, contact IBM support. Unexpected.internal.engine.error.while.processing.request=SRVE0051E: An internal engine error occurred while processing request Internal engine error. Gather server logs and contact IBM service. Internal.Error=SRVE0043E: Internal Error Internal error encountered. Examine the server logs in order to determine the root cause of the problem. If there are no related messages or they do not help to resolve the problem, contact IBM Support. WTRN0006_ERR_CLOSING_XA_CONNECTION=WTRN0006W: Encountered an error while closing XAConnection: {0} The exception stack trace follows: {1} An SQLException occured when attempting to close a connection to the resource manager. No action is required, as this should not affect the running of the transaction service. Error.during.Plugin.Cfg.Notification=SRVE0049E: An error occurred during plug-in configuration notification This is an internal system error and is probably caused by an earlier failure. Examine the server logs in order to determine the root cause of the problem. If there are no related messages or they do not help to resolve the problem, contact IBM Support. Servlet.ERROR:.{0}=SRVE0123E: Servlet error: {0} A servlet encountered the specified error. Varies by root cause. Failed.to.start.the.Bootstrap.server.{0}=NMSV0010E: Failed to start the Bootstrap server {0} This exception is unexpected. The cause is not immediately known. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . Error.Initializing.for.Next.Request=SRVE0070E: Error initializing for next request Internal web container error. Gather server logs and contact IBM service. HTTP.Transport.Started.on.Port.{0}=SRVE0136I: HTTP transport started on Port {0} This message is for informational purposes only. No action is required. Could.not.find.resource./default.servlet_engine=SRVE0118E: Could not find resource /default.servlet_engine This is an internal system error and is probably caused by an earlier failure. Examine the server logs in order to determine the root cause of the problem. If there are no related messages or they do not help to resolve the problem, contact IBM Support. Illegal.Argument:.Invalid.Date.Format=SRVE0053E: Illegal Argument Exception: Invalid date format Invalid date format. Examine the server logs in order to determine the root cause of the problem. If there are no related messages or they do not help to resolve the problem, contact IBM Support. Illegal.use.of.OSEListenerDispatcher.by.plugin=PLGN0006E: Illegal use of OSEListenerDispatcher by plugin. This internal error occurs when the plug-in forces the application server dispatchers to handle more than one request at a time. Check the logs for an IllegalStateException which should occur just before this error. IO.Exception:.Connection.reset=SRVE0129W: IO Exception: Connection reset The server connection was reset. Retry any previously failing operations. Failed.to.get.an.initial.naming.context:.{0}=NMSV0003E: Failed to get an initial naming context: {0} This exception is unexpected. The cause is not immediately known. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . Illegal.Argument:.Trying.to.write.<.0.bytes=SRVE0121E: Illegal Argument Exception: Trying to write < 0 bytes Attempting to output a buffer of size less than 0. Only write buffers of size of 0 or greater. The.deserializeObject.method.failed:.{0}=NMSV0005W: The deserializeObject method failed: {0} This exception is unexpected. The cause is not immediately known. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . Class.name.malformed=SRVE0084E: Class name malformed This is an internal system error and is probably caused by an earlier failure. Examine the server logs in order to determine the root cause of the problem. If there are no related messages or they do not help to resolve the problem, contact IBM Support. [Servlet.Message]-[{0}]:.{1}=SRVE0032I: [Servlet Message]-[{0}]: {1} This message is for informational purposes only. No user action is required. WTRN0005_ERR_CREATING_XACONNECTION_AND_XARESOURCE=WTRN0005W: An exception occured while creating an XAConnection and XAResource. The exception stack trace follows: {0} A problem has occured attempting to access a resource provided by a resource manager (such as a database). Ensure the expected resource managers and resources are accessible. For example, ensure that all data sources are correctly defined. Servlet.has.become.permanently.unavailable.for.service:.{0}=SRVE0107I: Servlet has become permanently unavailable for service: {0} Servlet is no longer available for service. Restart the web application containing the servlet. Illegal.Argument.Trying.to.write.chars=SRVE0011E: Illegal Argument Exception: Trying to write < 0 chars Attempting to output a buffer of size less than 0. Only write buffers of size of 0 or greater. instantiate.collaborator.exception=SRVE0140E: Could not instantiate the security collaborator {0} Internal server error. Gather logs and contact IBM service. Error.disabling.servlet.{0}=SRVE0137E: An error occurred while disabling servlet {0} Problem encountered disabling the specified servlet. Examine the server logs in order to determine the root cause of the problem. If there are no related messages or they do not help to resolve the problem, contact IBM Support. Pool.Session.Exception:.Error.creating.an.instance.of.the.input.class!=SRVE0135E: Pool Session Exception: Error creating an instance of the input class! This is an internal system error and is probably caused by an earlier failure. Examine the server logs in order to determine the root cause of the problem. If there are no related messages or they do not help to resolve the problem, contact IBM Support. Error.Restarting.Web.App=SRVE0064E: An error occurred while restarting Web application Unable to restart a web application. Examine the server logs in order to determine the root cause of the problem. If there are no related messages or they do not help to resolve the problem, contact IBM Support. usertransaction.rollback.exception=SRVE0160E: Exception while rolling back UserTransaction: {0} Problem encountered rolling back the specified user transaction. Examine the server logs in order to determine the root cause of the problem. If there are no related messages or they do not help to resolve the problem, contact IBM Support. Illegal.Argument:.Missing.flag.value=SRVE0108E: Illegal Argument Exception: Missing flag value Missing flag value. Examine the server logs in order to determine the root cause of the problem. If there are no related messages or they do not help to resolve the problem, contact IBM Support. Error.initializing.IIOPRedirector=SRVE0101E: Error Initializing IIOPRedirector This is an internal system error and is probably caused by an earlier failure. Examine the server logs in order to determine the root cause of the problem. If there are no related messages or they do not help to resolve the problem, contact IBM Support. failed.to.load.session.context=SRVE0159E: Failed to load the Session Context: {0} Could not load the specified session context. Examine the server logs in order to determine the root cause of the problem. If there are no related messages or they do not help to resolve the problem, contact IBM Support. failed.to.load.war=SRVE0148W: Failed to load WAR {0}/{1} : {2} Unable to load the specified WAR file. Most likely a definition problem. Examine the server logs in order to determine the root cause of the problem. If there are no related messages or they do not help to resolve the problem, contact IBM Support. failed.to.start.transport=SRVE0146E: Failed to Start Transport on host {1}, port {2}. The most likely cause is that the port is already in use. Please ensure that no other applications are using this port and restart the server. {0} Failure starting a server transport. Be sure that the defined transport port is not in use by another application. CosNamingServer.caught.exception:.AdapterAlreadyExistsException.=NMSV0011E: CosNamingServer caught exception: AdapterAlreadyExistsException. This exception is unexpected. The cause is not immediately known. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . Generating.Plugin.Configuration.For.This.Node=SRVE0098I: Generating plug-in configuration for this node This message is for informational purposes only. No action is required. Servlet.available.for.service:.{0}=SRVE0130I: Servlet available for service: {0} This message is for informational purposes only. No action is required. file.not.found.in.remove.webapp=SRVE0153E: An error occurred while removing the Web Application {0} Problem encountered removing the specified web application. Examine the server logs in order to determine the root cause of the problem. If there are no related messages or they do not help to resolve the problem, contact IBM Support. Unabled.to.load.admin.config..The.default.server.will.not.be.started.=SRVE0111E: Unable to load administrative configuration. The default server will not be started Internal server error. Gather logs and contact IBM service. Invalidation.Exception:.JarFileClassProvider.is.invalid..File.has.been.deleted=SRVE0009I: Invalidation Exception: JarFileClassProvider is invalid. File has been deleted This message is for informational purposes only. No action is required. Internal.Error:.Connection.Queue.Overflow=SRVE0007E: Internal Error: Connection queue overflow Connection queue has overflowed. Increase the size of the connection queue. Object.not.serializable=SRVE0037E: Object is not serializable A remote object is not serializable. Be sure your remote objects implement the Serializable interface. Unable.to.get.remote.attribute.names=SRVE0117E: Unable to get remote attribute names This is an internal system error and is probably caused by an earlier failure. Examine the server logs in order to determine the root cause of the problem. If there are no related messages or they do not help to resolve the problem, contact IBM Support. AdminListener=SRVE0065E: AdminListener AdminListener. Examine the server logs in order to determine the root cause of the problem. If there are no related messages or they do not help to resolve the problem, contact IBM Support. Servlet.has.become.temporarily.unavailable.for.service:.{0}=SRVE0095I: Servlet has become temporarily unavailable for service: {0} Specified servlet is temporarily unavailable. Wait and retry operation. Servlet might have been removed from service by server administrator. Place.your.servlet's.class.on.classpath.of.the.application.server.{0}:.{1}=SRVE0019I: Place your servlet's class on classpath of the application server {0}: {1} This message is for informational purposes only. No action is required. setbuffer.size.called.after.write=SRVE0157E: setBufferSize() called after first write to Output Stream/Writer An attempt was made to set the response buffer size after the response was already commited. Remove the setBufferSize() call or move it to a position before the response commit. Failed.to.restartWebGroup.{0}=SRVE0083E: Failure to restart WebGroup {0} Failure to restart WebGroup. Examine the server logs in order to determine the root cause of the problem. If there are no related messages or they do not help to resolve the problem, contact IBM Support. Plugin.Cfg.Error=SRVE0028E: An error occured in plug-in configuration Error encountered reading plug-in configuration. Examine the server logs in order to determine the root cause of the problem. If there are no related messages or they do not help to resolve the problem, contact IBM Support. Caught.exception.trying.to.load.JSP.file=SRVE0182E: Caught an exception trying to load a JSP on startup: {0} A JSP file that is deployed in web.xml and is indicated to load-on-startup failed to translate or compile. Examine the server logs in order to determine the root cause of the failure. If there are no related messages or they do not help to resolve the problem, contact IBM Support. Servlet.Exception:.non-HTTP.request.or.response=SRVE0078E: Servlet Exception: non-HTTP request or response A request or response serviced by a servlet is not of type HTTP. Examine the server logs in order to determine the root cause of the problem. If there are no related messages or they do not help to resolve the problem, contact IBM Support. module.referenced.empty.resource=SRVE0151E: A Web Module referenced an empty resource. The Web Application will not be loaded. A resource defined in the web application is empty. Examine the server logs in order to determine the root cause of the problem. If there are no related messages or they do not help to resolve the problem, contact IBM Support. initializing.Default.Server=SRVE0069I: Initializing Default Server This message is for informational purposes only. No user action is required. Error.reloading.SessionContext=SRVE0075E: Error reloading session context This is an internal system error and is probably caused by an earlier failure. Examine the server logs in order to determine the root cause of the problem. If there are no related messages or they do not help to resolve the problem, contact IBM Support. Illegal.Argument:.Bootstrap.File.Not.Found=SRVE0041E: Illegal Argument Exception: Bootstrap file not found This is an internal system error and is probably caused by an earlier failure. Examine the server logs in order to determine the root cause of the problem. If there are no related messages or they do not help to resolve the problem, contact IBM Support. bsf.support.in.jsp.engine.deprecated=SRVE0184W: WARNING: Bean Scripting Framework support in the JSP engine is deprecated starting with release 5.1 of WebSphere Application Server and will be no longer be supported after release 6.0. A Java ServerPages (JSP) file that uses server-side Javascript with the BSF engine has been detected. Replace the server-side Javascript with other mechanisms, such as Java ServerPages (JSP) Version 2.0 Expression Language. Illegal.Argument:.Error.Reading.Bootstrap.File=SRVE0002E: Illegal Argument Exception: Error reading bootstrap file This is an internal system error and is probably caused by an earlier failure.. Examine the server logs in order to determine the root cause of the problem. If there are no related messages or they do not help to resolve the problem, contact IBM Support. namespace.invalid.type=SRVE0144W: Invalid type encountered in java:comp binding The type encountered in java:comp binding is not valid. Examine the server logs in order to determine the root cause of the problem. If there are no related messages or they do not help to resolve the problem, contact IBM Support. Failed.to.set.attribute=SRVE0024E: Failure to set attribute Could not set an attribute. Make sure the attribute conforms to attribute guidelines. [{0}][{1}][Servlet.LOG]:.{2}=SRVE0180I: [{0}] [{1}] [Servlet.LOG]: {2} This message is for informational purposes only. No action is required. LocalTransaction.rolled-back.due.to.setRollbackOnly=SRVE0183E: LocalTransaction rolled-back due to setRollbackOnly LocalTransaction rolled-back due to setRollbackOnly action by the application Examine the server logs to determine the root cause of the failure. Also check your application for setRollBackOnly calls. Failed.to.service=PLGN0036E: Failure to service An error occured while processing a queued service event. Examine the server logs in order to determine the root cause of the problem. If there are no related messages or they do not help to resolve the problem, contact IBM Support. Uncaught.service().exception.thrown.by.servlet.{0}:.{1}=SRVE0068E: Did not realize service() exception thrown by servlet {0}: {1} Could not invoke service method for the specified servlet. Examine the server logs in order to determine the root cause of the problem. If there are no related messages or they do not help to resolve the problem, contact IBM Support. security.ssl.config.initialization.warning.invalidkeystoretype=SRVE0500W: The keystore or truststore type specified is invalid. Adjusting to use the correct type, however, please correct the SSL configuration for performance reasons. The specified keystore or truststore type is not valid. Modify the Secure Sockets Layer (SSL) configuration so that the keystore or truststore type is a valid type. You can check the keystore and truststore types by loading them in iKeyMan tool, which is located in the install_root/bin directory. Failed.to.retrieve.attribute=SRVE0134E: Failed to retrieve attribute This is an internal system error and is probably caused by an earlier failure. Examine the server logs in order to determine the root cause of the problem. If there are no related messages or they do not help to resolve the problem, contact IBM Support. Unable.to.initialize.IIOPRedirector.Transport=SRVE0038E: Unable to initialize IIOPRedirector Transport This is an internal system error and is probably caused by an earlier failure. Examine the server logs in order to determine the root cause of the problem. If there are no related messages or they do not help to resolve the problem, contact IBM Support. web.container.jsp.spec.level=SRVE0163I: Supported JSP Specification Level: 1.2 The JSP specification level supported by the application server. No action is required. The.getObjectInstance.method.failed:.{0}=NMSV0002W: The getObjectInstance method failed: {0} This exception is unexpected. The cause is not immediately known. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . Waiting.servlet.to.finish.servicing.requests:.{0}=SRVE0066I: Waiting for servlet to finish servicing requests: {0} This message is for informational purposes only. No user action is required. Error.getting.remote.attribute:.{0}=SRVE0089E: Error getting remote attribute: {0} Could not get the specified remote attribute. Could be caused by connectivity problems. Wait and try again. Servlet.Redirector.Starting...=SRVE0131I: Servlet redirector starting This message is for informational purposes only. No action is required. Servlet.wait.for.destroy.timeout.has.expired,.destroy.will.be.forced:.{0}=SRVE0055I: Servlet wait for destroy time-out has expired, destroy will be forced: {0} Servlet is being destroyed after wait has timed out. No action is required. Object.Pool.Exception:.Class.not.accessible.to.instantiate.=SRVE0027E: Object Pool Exception: Class not accessible to instantiate. Class specified to object pool is not accessible. Be sure the class is on the object pool's classpath. Error.handling.invocation=SRVE0059E: Error handling invocation {0} This is an internal system error and is probably caused by an earlier failure. Examine the server logs in order to determine the root cause of the problem. If there are no related messages or they do not help to resolve the problem, contact IBM Support. Failed.to.initialize.webapp.{0}=SRVE0015E: Failure to initialize Web application {0} Could not initialize the web application specified in the message. Check all definitions for this web application (web module) in the application.xml and web.xml files. Uncaught.destroy().exception.thrown.by.servlet.{0}:.{1}=SRVE0058E: Did not realize destroy() exception thrown by servlet {0}: {1} Could not destroy specified servlet. Examine the server logs in order to determine the root cause of the problem. If there are no related messages or they do not help to resolve the problem, contact IBM Support. Unabled.to.cleanly.stop.the.Transport=SRVE0033E: Unable to cleanly stop the transport Error encountered stopping a transport. Examine the server logs in order to determine the root cause of the problem. If there are no related messages or they do not help to resolve the problem, contact IBM Support. Illegal.Argument:.Unsupported.flag=SRVE0056E: Illegal Argument Exception: Unsupported flag This is an internal system error and is probably caused by an earlier failure. Examine the server logs in order to determine the root cause of the problem. If there are no related messages or they do not help to resolve the problem, contact IBM Support. transport.is.listening=SRVE0171I: Transport {0} is listening on port {1}. This message is for informational purposes only. No action is required. context.root.already.in.use=SRVE0164E: Web Application {0} uses the context root {1}, which is already in use by Web Application {2}. Web Application {3} will not be loaded. Two web applications on the same virtual host share the same context root. Either change the context root of one of the web applications or move one to a different virtual host. Error.caught.while.reloading.servlet.group:.{0}=SRVE0018E: Error occurred while reloading servlet group: {0} This is an internal system error and is probably caused by an earlier failure. Examine the server logs in order to determine the root cause of the problem. If there are no related messages or they do not help to resolve the problem, contact IBM Support. JNDI.Error=SRVE0006E: JNDI Error Error in the JNDI service. Be sure that you have defined a JNDI service and that its port is not in use by another application. Unabled.to.load.specified.config.file=SRVE0052E: Unable to load specified configuration file This is an internal system error and is probably caused by an earlier failure. Examine the server logs in order to determine the root cause of the problem. If there are no related messages or they do not help to resolve the problem, contact IBM Support. failed.to.restart.webapp=SRVE0165E: Failed to restart Web Application: {0} Could not restart the specified web application. Examine the server logs in order to determine the root cause of the problem. If there are no related messages or they do not help to resolve the problem, contact IBM Support. illegal.argument.set.script=SRVE0154E: Illegal Argument: ScriptName must be the first part of the URI This is an internal system error and is probably caused by an earlier failure. Examine the server logs in order to determine the root cause of the problem. If there are no related messages or they do not help to resolve the problem, contact IBM Support. stopping.web.module=SRVE0170I: Stopping Web Module: {0}. This message is for informational purposes only. No action is required. Failed.to.set.the.Dirty.bit.on.all.active.nodes=SRVE0113E: Failure to set the Dirty bit on all active nodes This is an internal system error and is probably caused by an earlier failure. Examine the server logs in order to determine the root cause of the problem. If there are no related messages or they do not help to resolve the problem, contact IBM Support. Root.Cause=SRVE0030I: Root Cause {0} This message is for informational purposes only. No user action is required. Could.not.load.Web.Application=SRVE0077E: Servlet Exception: Could not load Web application {0} Could not load the specified Web application. Examine the server logs in order to determine the root cause of the problem. If there are no related messages or they do not help to resolve the problem, contact IBM Support. Servlet.Redirector.Running...=SRVE0034I: Servlet redirector is running This message is for informational purposes only. No user action is required. iiopredirector.xml.contains.invalid.XML.syntax=SRVE0008E: iiopredirector XML contains invalid XML syntax iiopredirector XML contains invalid XML syntax Examine the iiopredirector xml for syntax conformance. doLookup:.CommFailure..Will.return.object.for.WLM.{0}=NMSV0009W: doLookup: CommFailure. Will return object for WLM.{0} This exception is unexpected. The cause is not immediately known. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . session.manager.not.configured=SRVE0168E: Session Manager is Not Configured. Session manager has not been configured for the web container. Define the session manager properties in the server.xml file. failed.to.load.converter.properties=SRVE0156E: Failed to load converter.properties file {0} Could not load the specified file. Be sure the specified file exists. MalformedXMLInfoException:.Duplicate.init-parameter.detected.[{0}]=SRVE0102E: MalformedXMLInfoException: Duplicate init-parameter detected [{0}] Two initialization parameters have the same xml id. Make sure all initialization parameters have unique id's. WebAppSecurityCollaborator=SRVE0035E: WebAppSecurityCollaborator WebAppSecurityCollaborator. Examine the server logs in order to determine the root cause of the problem. If there are no related messages or they do not help to resolve the problem, contact IBM Support. error.referencing.module.resource=SRVE0152E: An error occurred referencing the Web Module resource. The Web Application will not be loaded. Problem encountered reading the web module definition for the web application. Examine the server logs in order to determine the root cause of the problem. If there are no related messages or they do not help to resolve the problem, contact IBM Support. Can.not.create.SQEventImp=PLGN0010W: Cannot create SQEventImp Pooled resources don't contain any SQEvents No user action is required. Servlet.Exception.Error.while.finishing.response=SRVE0073E: Servlet Exception: Error while finishing response {0} Internal web container error. Gather server logs and contact IBM service. [Servlet.LOG]:.{0}:.{1}=SRVE0092I: [Servlet LOG]: {0}: {1} This message is for informational purposes only. No action is required. MalformedXMLInfoException:.Missing.name.in.init-parameter=SRVE0013E: MalformedXMLInfoException: Missing name in init-parameter Initialization parameter name not found. Specify a parameter name in the web.xml file. Session.releaseSession().threw.an.unexpected.exception=SRVE0105E: An exception occurred in Session.releaseSession() Problem releasing a session. Examine the server logs in order to determine the root cause of the problem. If there are no related messages or they do not help to resolve the problem, contact IBM Support. Creating.Sample.Server.Configuration=SRVE0088I: Creating Sample Server Configuration This message is for informational purposes only. No action is required. MalformedXMLInfoException:.Missing.value.in.init-parameter.[{0}]=SRVE0125E: MalformedXMLInfoException: Missing value in init-parameter [{0}] The specified initialization parameter is missing a value. Be sure the definition for the parameter in the web.xml file is complete. Unexpected.internal.engine.error.while.sending.error.to.client:.{0}=SRVE0063E: An internal engine error occurred while sending error to client: {0} Internal web container error. Gather server logs and contact IBM service. loading.web.module=SRVE0169I: Loading Web Module: {0}. This message is for informational purposes only. No action is required. Illegal.Argument:.Invalid.Content.Length=SRVE0042E: Illegal Argument Exception: Invalid content length This is an internal system error and is probably caused by an earlier failure. Examine the server logs in order to determine the root cause of the problem. If there are no related messages or they do not help to resolve the problem, contact IBM Support. Object.Pool.Exception:.Class.could.not.be.instantiated.=SRVE0099E: Object Pool Exception: Class could not be instantiated. Could not instantiate a class for use by the object pool. Be sure the class exists and is visible on the application classpath. Server.name.not.specified..Using.first.servlet.engine.in.Config.File=SRVE0062I: Server name not specified. Using first servlet engine in configuration file Using first server specification found. No action is required. Servlet.Exception:.Missing.Resource:.{0}=SRVE0044E: Servlet Exception: Missing resource: {0} Could not find the specified resource for a servlet. Be sure the resource exists and has been defined. Error.locating.a.matching.Virtual.Host=SRVE0112E: Error locating a matching Virtual Host Could not find a virtual host for the web application. Be sure the web application is bound to a valid virtual host. Servlet.Request.Processor.Exception.Virtual.Host.WebGroup.Not.Found=PLGN0021E: Servlet Request Processor Exception: Virtual Host/WebGroup Not Found {0} The virtual host containing requested application is not found. Check the virtual host on which application is installed. Make sure virtual host configuration has alias with host and port defined as invoked by clients. Error.Creating.Initial.Systems.Management.Configuration=SRVE0012E: Error creating Initial Systems Management Configuration This is an internal system error and is probably caused by an earlier failure. Examine the server logs in order to determine the root cause of the problem. If there are no related messages or they do not help to resolve the problem, contact IBM Support. Error.invoking.servlet=SRVE0128E: Error invoking servlet {0} Problem encountered invoking the specified servlet. Examine the server logs in order to determine the root cause of the problem. If there are no related messages or they do not help to resolve the problem, contact IBM Support. [Servlet.Error]-[{0}]:.{1}=SRVE0026E: [Servlet Error]-[{0}]: {1} An error was encountered in the specified servlet. Varies by reported cause. Failed.to.start.Admin.Transport=SRVE0096E: Failed to start administrative transport Could not start the transport for the administration service. Gather logs and contact IBM support. Number.Format.Exception:.Invalid.Integer.Format=SRVE0119E: Number Format Exception: Invalid Integer Format The integer format is not valid. Examine the server logs in order to determine the root cause of the problem. If there are no related messages or they do not help to resolve the problem, contact IBM Support. failed.to.load.webapp.binding=SRVE0142E: Failed to load WebApp Bindings {0} Could not find the bindings for the web application. Be sure that the ibm-web-bnd.xmi file exists for the application. Uncaught.service().exception.root.cause.{0}:.{1}=SRVE0014E: Uncaught service() exception root cause {0}: {1} Uncaught exception created in servlet service method. Varies by root cause. Error.creating.an.instance.of.the.input.class!=SRVE0046E: Error creating an instance of the input class! This is an internal system error and is probably caused by an earlier failure. Examine the server logs in order to determine the root cause of the problem. If there are no related messages or they do not help to resolve the problem, contact IBM Support. transport.is.stopped=SRVE0172I: Stopped transport {0} on port {1}. This message is for informational purposes only. No action is required. web.container.copyright=SRVE0161I: IBM WebSphere Application Server - Web Container. Copyright IBM Corp. 1998-2002 Application server identifier. No action is required. Error.while.shutting.down.the.application.server=SRVE0124E: Error while shutting down the application server Problem encountered while shutting down the server. Examine the server logs in order to determine the root cause of the problem. If there are no related messages or they do not help to resolve the problem, contact IBM Support. IllegalArgumentException:.Invalid.transport.name:.{0}=SRVE0004W: Illegal Argument Exception: Invalid transport name: {0} The specified transport name is not valid. Define a transport conforming to the transport definition rules. Illegal.Argument:.Invalid.Directory.Specified:.{0}=SRVE0061E: Illegal Argument Exception: Invalid directory specified: {0} The specified directory is not valid. Check directory specification for errors. Error.initializing.Default.Server=SRVE0085E: Error initializing Default Server Could not initialize the default server. Examine the server logs in order to determine the root cause of the problem. If there are no related messages or they do not help to resolve the problem, contact IBM Support. failed.to.load.encoding.properties=SRVE0155E: Failed to load encoding.properties file {0} Could not load the specified file. Be sure the specified file exists. Using./default.servlet_engine.for.configuration.data.=SRVE0003I: Using /default servlet_engine for configuration data This message is for informational purposes only. No user action is required. no.virtual.host.for.webapp=SRVE0147E: No Virtual Host defined for web module: {0} The Web Application will not be loaded. A virtual host has not been bound to the specified web module. Specify a virtual host in the web application's ibm-web-bnd.xmi file. Web.Group.Not.Found=SRVE0023E: Web Group not found This is an internal system error and is probably caused by an earlier failure. Examine the server logs in order to determine the root cause of the problem. If there are no related messages or they do not help to resolve the problem, contact IBM Support. virtual.host.not.specified=SRVE0166E: Virtual host not specified. Using {0}. No virtual host has been bound to the web application. Using default. If a different virtual host is desired, specify one in the web application bindings. Servlet.unloaded:.{0}=SRVE0021I: Servlet unloaded: {0} This message is for informational purposes only. No action is required. Unabled.to.obtain.Object.from.object.pool..{0}=SRVE0127E: Unable to obtain Object from object pool {0} Internal server error. Gather server logs and contact IBM Service. IO.Exception:.Tried.to.write.more.than.the.content.length=SRVE0076E: IO Exception: Tried to write more than the content length Internal server error. Gather logs and contact IBM service. Servlet.unload.initiated:.{0}=SRVE0097I: Servlet unload initiated: {0} This message is for informational purposes only. No action is required. unable.to.restart.webapp=SRVE0149E: Unable to restart Web Application. Specified Application not found: {0} Could not find the definition for the specified web application. Examine the server logs in order to determine the root cause of the problem. If there are no related messages or they do not help to resolve the problem, contact IBM Support. Failed.to.addWebGroup=SRVE0005E: Failure to add WebGroup {0} Failed to add the web group specified in the message to the web container. Check the definitions for the web group (web module) in web.xml. Remote.Exception=SRVE0036E: Remote Exception This is an internal system error and is probably caused by an earlier failure. Examine the server logs in order to determine the root cause of the problem. If there are no related messages or they do not help to resolve the problem, contact IBM Support.