error.unexpectedException=CWUDU0112E: An unexpected exception has occurred: {0} An unexpected error occurred. Check configuration file settings and all registries and databases are active. If necessary, contact your IBM support center. message.xml.parserProperty.unsupported=CWUDU0040E: Unsupported parser property: {0}, value: {1} A parser property set by the UDDI Utility Tools is not supported by the parser. Check you are using the correct type and level of XML parser. If correct, contact your IBM support center. error.findFailed.tModels=CWUDU0132E: Find tModels failed. The UDDI4J find tModels operation did not complete. Check the configuration properties for the source registry, such as fromInquiryURL. error.orphaned.businessStub=CWUDU0117W: Business minimal entity with businessKey [{0}] has not been removed from the database. A business minimal entity was orphaned in the target registry database and attempts to remove it failed. Identify the orphaned minimal entity in the target registry and attempt to remove using normal UDDI delete methods, or by using the delete function of the UDDI Utility Tools. error.messagesFile.closeFailed=CWUDU0052E: Unable to close the messages file: {0} The attempt to close the message log file failed. The disk might be full. If so, clear some space or direct log output to a different disk. error.db.closeConnection=CWUDU0068E: Could not close the database connection. An attempt to close the database connection failed. If the problem persists, contact your IBM support center. message.badEntity=CWUDU0004W: Bad entityType: received<{0}>, expected <tModel|business|service|binding> The user entered an incorrect entity type. Use an entity type of tModel, business, service or binding. error.stub.serviceDelete=CWUDU0139E: Could not delete minimal entity for Service with serviceKey[{0}]. The entity with the supplied Service key could not be located and therefore deleted. Ensure Service key is correct. error.cmdLine.unknownArgument=CWUDU0060W: The argument ''{0}'' was not recognised. The argument value does not match any of the allowed arguments. Specify arguments in accordance with the usage message. message.delete.successful=CWUDU0008I: Delete successful. Indicates the delete function completed successfully. None. message.xml.parserFeature.unsupported=CWUDU0038E: Unsupported parser feature: {0} A parser feature set by the UDDI Utility Tools is not supported by the parser. Check you are using the correct type and level of XML parser. If correct, contact your IBM support center. error.getAuthInfoFailed=CWUDU0078E: Unable to obtain authinfo. AuthInfo could not be obtained from the UDDI registry with the given userid and password. Check the userid and password property values are correct in the configuration file. message.import.complete=CWUDU0115I: Imported {0} entities and {1} referenced entities. Indicate that the import step of the import or promote function has completed, showing the number of entities imported. None. message.export.end=CWUDU0015I: Exported {0} entities. Indicates that the export function completed, and shows the number of entities exported. None. message.usage=CWUDU0001I: Usage: java -jar UDDIUtilityTools.jar '{'function'}' [options] function: -promote <entity source> Promote entites between registries -export <entity source> Extract entities from registry to XML -delete <entity source> Delete entities from registry -import Create entities from XML to registry where <entity source> is one of: -tmodel|-business|-service|-binding <key> Specify single entity type and key -keysFile | -f <filename> Specify file containing entity types and keys options: -properties <filename> Specify path to configuration file -overwrite | -o Overwrite an entity if it already exists -log | -v Output verbose messages -definitionFile <filename> Specify path to UDDI entity definition file -importReferenced Import entities referenced by source entities The following options override property settings in configuration file: -overwrite -log -definitionFile -importReferenced Example: java -jar UDDIUtilityTools.jar -promote -keysFile C:/uddikeys.txt This is the usage message displayed at the command line when the user has entered a combination of arguments or options that are not valid. Enter the command according to the usage message. error.definitionFile.fileNotFound=CWUDU0050E: Unable to find UDDI Entity definition file. {0} The Entity Definition File could not be found at the specified file path. Check the file path is correct and that the file exists. error.definitionFile.writeError=CWUDU0049E: Unable to write to entity definition file: {0} During serialization, the Entity Definition File could not be written to. Check the file's read only attribute is not set. message.import.successful=CWUDU0006I: Import successful. Indicates the import function completed successfully. None. message.import.end=CWUDU0022I: Imported {0} entities. Indicates that the import function completed, and shows the number of entities imported. None. message.deserializing.end=CWUDU0032I: Deserialized entities. Indicates that reading of the Entity Definition File and creation of UDDI entities completed successfully. None. error.transportException=CWUDU0113E: Could not get a response from UDDI registry at URL: {0} A TransPortException occurred while performing an UDDI4J operation on the UDDI registry at the specified URL. Check configuration properties for the UDDI registry in question and ensure the UDDI registry is active. error.config.propertiesIOException=CWUDU0043E: An Exception occurred trying to read the configuration file. The configuration file could not be read. Check the file path points to a valid file and that the current user has permission to read the file. error.getBindingFailed=CWUDU0084E: Could not get binding detail for bindingKey[{0}]. The get binding operation failed on the source registry. Check the key exists in the source registry. message.serializing.end=CWUDU0030I: Serialized entities. Indicates that generation of the Entity Definition File completed successfully. None. message.delete.binding=CWUDU0026I: Deleting binding, bindingKey[{0}]. Indicates that the bindingTemplate with the specified key is being deleted. None. message.import.tModel=CWUDU0020I: Importing tModel, tModelKey[{0}]. Indicates that the tModel with the specified key is being imported. None. error.saveBindingFailed=CWUDU0088E: Could not save binding for parent serviceKey[{0}]. The publish operation failed at the target registry. Check the businessService specified as the parent of the bindingTemplate exists in the target registry. message.deleted.businessStub=CWUDU0125I: Deleted business minimal entity with businessKey [{0}]. Indicates the minimal data inserted for a businessEntity was successfully removed from the target UDDI registry database. This would normally happen after a publish operation has failed. None. error.deleteServiceFailed=CWUDU0092E: Could not delete service for serviceKey[{0}]. The UDDI4J operation to delete the businessService with the specified key failed. Check userid and password property values in the configuration file and that the entity exists on the target UDDI registry. message.export.successful=CWUDU0007I: Export successful. Indicates the export function completed successfully. None. message.import.business=CWUDU0017I: Importing business, businessKey[{0}]. Indicates that the businessEntity with the specified key is being imported. None. error.config.propertyMissing=CWUDU0044W: Configuration file is missing the ''{0}'' property. A required property is missing from the configuration file. Add the missing property name and value to the configuration file. Check that the property name is not misspelled. message.exportFind.start=CWUDU0134I: Performing inquiry request... Indicates the find operation for selecting keys has started. None. error.errorOccurred=CWUDU0055E: ERROR OCCURRED... None None error.config.integerProperty=CWUDU0046W: Property: ''{0}'' has value ''{1}''. It must be an integer value. A value was given to a property other than an integer value. Set the property value to an integer value. message.xml.parserWarning.prefix=CWUDU0035W: Parser warning: {0} The XML parser reports a warning about the content of the Entity Definition File. Based on the context of the warning message, check the validity of the Entity Definition File. message.toolStart=CWUDU0002I: ********** Starting UDDI Utility Tools ********** This message is used as a marker in the message log file to indicate tool start points. None. error.stub.serviceCreate=CWUDU0070E: Could not create minimal entity for Service with serviceKey[{0}]. The minimal data necessary for a valid businessService could not be inserted in the target UDDI registry database. Check the database URL, userid and password values are correct in the configuration file, and that the database manager is running. message.serializing.start=CWUDU0029I: Serializing... Indicates that generation of the Entity Definition File has started. None. error.findFailed.services=CWUDU0131E: Find services failed. The UDDI4J find services operation did not complete. Check the configuration properties for the source registry, such as fromInquiryURL. error.stub.bindingDelete=CWUDU0141E: Could not delete minimal entity for Binding with bindingKey[{0}]. The entity with the supplied Binding key could not be located and therefore deleted. Ensure Binding key is correct. error.cmdLine.keySpecified=CWUDU0063W: Unexpected argument: {0} (entity key is already specified). The keysFile argument cannot be specified if an entity type argument and key value has already been supplied. Specify arguments in accordance with the usage message. error.sql.exception=CWUDU0137E: Unexpected database SQL exception: {0}. An unexpected SQL Exception has been encountered. Examine the SQL Exception Message to determine the cause of the problem. error.autoCommit.off=CWUDU0107E: Unable to set auto-commit off on the database connection. UDDI Utility Tools needs to control commits of data changes, however the attempt to turn off auto-commit failed. Check the database configuration. If necessary, turn on trace logging and look for the SQLException that is recorded. error.db.noConnection=CWUDU0067E: Could not create Database connection: dbUrl<{0}>, dbUser<{1}>, (dbPasswd not shown). A connection could not be established with the database at the specified URL with the specified userid. Check the database URL, userid and password values are correct in the configuration file, and that the database manager is running. error.existingBinding.noOverwrite=CWUDU0100W: Did not save binding for bindingKey[{0}] as it already exists. Use the -overwrite argument to overwrite the binding. The bindingTemplate was not saved because the overwrite property is false. If the desired action is to overwrite existing entities, specify -overwrite on the command line or set the overwrite property in the configuration file to true. error.cmdLine.unknownFunction=CWUDU0059W: The function: {0} was not recognised. The function value did not match any of the allowed functions. Specify one function in accordance with the usage message. message.completedWithErrors=CWUDU0034W: Function ''{0}'' did not complete successfully. See messages log for further information. Indicates the requested function did not complete successfully. The messages log may yield further information if the verbose option is on. Check the configuration properties file settings are correct. If that does not identify the problem, try running with trace logging enabled. If that does not yield a solution, contact your IBM support center. error.config.propertiesFileNotFound=CWUDU0042E: Unable to find the configuration file: {0} UDDI Utility Tools cannot locate the specified configuration file. UDDI Utility Tools looks for a default configuration properties with the file name 'UDDIUtilityTools.properties' in the current directory. Check that the configuration file has this name, or that the argument value supplied with the '-properties' option is pointing at a file that exists. message.placeHolder=CWUDU0041I: {0} None None error.saveTModelFailed=CWUDU0085E: Could not save tModel for tModelKey[{0}]. The publish operation failed at the target registry. Check the tModel is not referencing another entity (such as a tModel) that is not present in the target registry. This may occur if the 'importReferenced' property is set to 'false'. Specify referenced tModels in the referencedTModels section of the Entity Definition File and set 'importReferenced' property in the configuration file to 'true'. error.rollback.failed=CWUDU0105E: Rollback failed. The rollback operation failed with an Exception. Turn on trace logging and look for the Exception that is recorded. error.invalidEntity=CWUDU0108E: An entity to be imported was found to be invalid. An imported UDDI entity is not correctly constructed. Examine the import file for UDDI entity errors. error.deleteBindingFailed=CWUDU0093E: Could not delete binding for bindingKey[{0}]. The UDDI4J operation to delete the bindingTemplate with the specified key failed. Check userid and password property values in the configuration file and that the entity exists on the target UDDI registry. error.invalidUUIDKey=CWUDU0096W: {0} is not a valid UUID. The key value entered does not comply with the format specified for a UUID in the UDDI specification. Enter a valid UUID key. error.xml.parseErrors=CWUDU0075E: One or more errors occurred while parsing the entity definition file. See message log for details. Errors occurred when parsing the Entity Definition File. Check the entity definiton file content is valid according to the UDDI Utility Tools schema file, promoter.xsd. message.promotingEntity=CWUDU0003I: Promoting entityType<{0}> key<{1}>... Indicates which entity type (business, tModel for example) is being promoted, and it's key value. None. error.orphaned.bindingStub=CWUDU0119W: Binding Template minimal entity with bindingKey [{0}] has not been removed from the database. A binding minimal entity was orphaned in the target registry database and attempts to remove it failed. Identify the orphaned minimal entity in the target registry and attempt to remove using normal UDDI delete methods, or by using the delete function of the UDDI Utility Tools. error.java.IOError=CWUDU0114E: An IOException occurred trying to invoke 'java'. When UDDI Utility Tools was invoked using the java -jar syntax, the invocation of the second JVM failed. Check the configuration property 'classpath' value is correct, and that Java is configured to run from the command line. message.deleted.bindingStub=CWUDU0127I: Deleted binding template minimal entity with bindingKey [{0}]. Indicates the minimal data inserted for a bindingTemplate was successfully removed from the target UDDI registry database. This would normally happen after a publish operation has failed. None. message.import.refedTModel=CWUDU0021I: Importing referenced tModel, tModelKey[{0}]. Indicates that the referenced tModel with the specified key is being imported. None. error.stub.bindingCreate=CWUDU0072E: Could not create minimal entity for Binding with bindingKey[{0}]. The minimal data necessary for a valid bindingTemplate could not be inserted in the target UDDI registry database. Check the database URL, userid and password values are correct in the configuration file, and that the database manager is running. message.xml.parserError.prefix=CWUDU0036E: Parser error: {0} The XML parser reports an error about the content of the Entity Definition File. Based on the context of the error message, check the validity of the Entity Definition File. error.xmlDoc.parseFailed=CWUDU0074E: There was an error parsing the entity definition file. An unspecified error occurred when parsing the Entity Definition File. Check the entity definiton file content is valid according to the UDDI Utility Tools schema file, promoter.xsd. error.cmdLine.argAlreadySpecified=CWUDU0064W: Argument: {0} cannot be specified more than once. An argument was specified twice in the same command. Specify arguments in accordance with the usage message. error.cmdLine.missingFunction=CWUDU0058W: No function was specified. UDDI Utility Tools was invoked with no function specified. Specify one function in accordance with the usage message. error.config.booleanProperty=CWUDU0045W: Property: ''{0}'' has value ''{1}''. It must be either ''true'' or ''false''. A value was given to a property other than 'true' or 'false'. Set the property value to 'true' or 'false'. error.badEntity=CWUDU0101W: Bad entityType: received<{0}>, expected <tModel|business|service|binding> The entered entity type was not recognized. Specify arguments in accordance with the usage message. error.circularReferenceDiscovered=CWUDU0110E: A cyclic dependency exists in the referenced tModels. The reference from tModel with key [{0}] to the tModel with key [{1}] completes the detected cycle. A cycle has been detected such that a tModel is being referenced by a tModel that it directly or indirectly references. This would cause the UDDI Utility Tools to enter an infinite loop trying to import referenced tModels, so the process is halted. Edit the Entity Definition File and temporarily remove the reference to the tModel in the cycle, taking a note of the reference details. After the import has successfully completed, update the tModel in the target registry to reintroduce the reference you previously removed. This can be done using the UDDI User Console, UDDI4J, or by creating a new Entity Defnition File with just the tModel to be updated, and running the UDDI Utility Tools with the import function. error.orphaned.serviceStub=CWUDU0118W: Service minimal entity with serviceKey [{0}] has not been removed from the database. A service minimal entity was orphaned in the target registry database and attempts to remove it failed. Identify the orphaned minimal entity in the target registry and attempt to remove using normal UDDI delete methods, or by using the delete function of the UDDI Utility Tools. message.deleted.serviceStub=CWUDU0126I: Deleted service minimal entity with serviceKey [{0}]. Indicates the minimal data inserted for a businessService was successfully removed from the target UDDI registry database. This would normally happen after a publish operation has failed. None. error.stub.undoFailed=CWUDU0116W: Not all minimal entities could be removed. The following remain in the database: A publish step was not successful which may have left one or more minimal entities in the target registry database. UDDI Utility Tools attempts to remove these minimal entities but in this case, the removal has failed. Following messages will indicate which minimal entities are left in the target registry. You can attempt to remove the minimal entities using normal methods, such as the user console, UDDI4J, or using the delete function of the UDDI Utility Tools. error.jsseprovider.notFound=CWUDU0144E: The configured JSSE Provider ({0}) could not be found. The JSSE Provider class name given in the jsse.provider property cannot be loaded. Check that the class name is correct, for example com.ibm.jsse.IBMJSSEProvider and the jar that contains the class has been defined in the class path property. error.stub.bindingError=CWUDU0143E: Invalid sequence number for binding: {0}. The BindingStub has a sequence number that is not valid. Ensure the sequence number is greater than zero. error.jsseprovider.notAccessed=CWUDU0146E: The configured JSSE Provider ({0}) could not be accessed during instantiation. The JSSE Provider class constructor for the class given in the jsse.provider property cannot be accessed. Check that the class name is correct, for example com.ibm.jsse.IBMJSSEProvider and that the class has a public zero parameter constructor. error.saveBusinessFailed=CWUDU0086E: Could not save business for businessKey[{0}]. The publish operation failed at the target registry. Check the businessEntity is not referencing another entity (such as a tModel) that is not present in the target registry. This may occur if the 'importReferenced' property is set to 'false'. Specify referenced tModels in the referencedTModels section of the Entity Definition File and set 'importReferenced' property in the configuration file to 'true'. error.existingBusiness.noOverwrite=CWUDU0098W: Did not save business for businessKey[{0}] as it already exists. Use the -overwrite argument to overwrite the business. The businessEntity was not saved because the overwrite property is false. If the desired action is to overwrite existing entities, specify -overwrite on the command line or set the overwrite property in the configuration file to true. error.saveBindingFailed.parentMissing=CWUDU0090W: Did not save binding for bindingKey[{0}] because parent service did not exist. The parent service for the specified bindingTemplate does not exist Check the key value for the parent entity is correct in the Entity Definition File, and that the entity exists in the target registry. error.cmdLine.missingValue=CWUDU0061W: There was a missing value for {0} argument. An expected value for the specified argument was not supplied. Specify a value for the argument in accordance with the usage message. error.publishURL.malformed=CWUDU0080E: The publishURL is malformed: {0} The publish URL specified in the configuration file is not valid. Correct the value for the publish URL (toPublishURL)in the configuration file. error.logger.fileNotFound=CWUDU0054E: The logger was unable to find the file: {0} The UDDI Utility Tools logger could not find the specified file. None. error.db.driverLoadFailed=CWUDU0066E: Could not load Database driver: dbDriver< {0} >. The specified database driver could not be loaded. Check the database driver value in the configuration file is valid, and the driver's class is present in the class path property. message.exportFind.end=CWUDU0135I: Extracted keys from inquiry results. Indicates the find operation to select keys has completed successfully. None. error.getBusinessFailed=CWUDU0083E: Could not get business detail for businessKey[{0}]. The get business operation failed on the source registry. Check the key exists in the source registry. message.completedOK=CWUDU0033I: Function ''{0}'' completed successfully. Indicates the requested function completed successfully. None. error.existingService.noOverwrite=CWUDU0099W: Did not save service for serviceKey[{0}] as it already exists. Use the -overwrite argument to overwrite the service. The businessService was not saved because the overwrite property is false. If the desired action is to overwrite existing entities, specify -overwrite on the command line or set the overwrite property in the configuration file to true. error.existingTModel.noOverwrite=CWUDU0097W: Did not save tModel for tModelKey[{0}] as it already exists. Use the -overwrite argument to overwrite the tModel. The tModel was not saved because the overwrite property is false. If the desired action is to overwrite existing entities, specify -overwrite on the command line or set the overwrite property in the configuration file to true. message.deleted.tModelStub=CWUDU0128I: Deleted tModel minimal entity with tModelKey [{0}]. Indicates the minimal data inserted for a tModel was successfully removed from the target UDDI registry database. This would normally happen after a publish operation has failed. None. error.stub.tModelDelete=CWUDU0138E: Could not delete minimal entity for tModel with tModelKey[{0}]. The entity with the supplied tModel key could not be located and therefore deleted. Ensure tModel key is correct. error.importConfig.definitionFileMissing=CWUDU0109W: The import function requires a UDDI entity definition file to be specified. A required argument value was not supplied. Specify -definition <path to Entity Definition File> on the command line, or set the value of the UddiEntityDefinitionFile property in the configuration file to the path to the Entity Definition File. error.orphaned.tModelStub=CWUDU0120W: TModel minimal entity with tModelKey [{0}] has not been removed from the database. A tModel minimal entity was orphaned in the target registry database and attempts to remove it failed. Identify the orphaned minimal entity in the target registry and attempt to remove using normal UDDI delete methods, or by using the delete function of the UDDI Utility Tools. message.export.refedTModel=CWUDU0014I: Exporting referenced tModel, tModelKey[{0}]. Indicates that the referenced tModel with the specified key is being exported. None. message.promote.successful=CWUDU0005I: Promotion successful. Indicates the promote function completed successfully. None. error.deleteBusinessFailed=CWUDU0091E: Could not delete business for businessKey[{0}]. The UDDI4J operation to delete the businessEntity with the specified key failed. Check userid and password property values in the configuration file and that the entity exists on the target UDDI registry. error.xml.parseWarnings=CWUDU0076W: One or more warnings were raised while parsing the entity definition file. See message log for details. Warnings occurred when parsing the Entity Definition File. Check the entity definiton file content is valid according to the UDDI Utility Tools schema file, promoter.xsd. message.created.bindingStub=CWUDU0123I: Created binding template minimal entity with bindingKey [{0}]. Indicates the minimal data required for a bindingTemplate has successfully been inserted in the target UDDI registry database. None. error.saveServiceFailed=CWUDU0087E: Could not save service for parent businessKey[{0}]. The publish operation failed at the target registry. Check the businessEntity specified as the parent of the businessService exists in the target registry. error.saveServiceFailed.parentMissing=CWUDU0089W: Did not save service for serviceKey[{0}] because parent business did not exist. The parent business for the specified businessService does not exist Check the key value for the parent entity is correct in the Entity Definition File, and that the entity exists in the target registry. message.export.service=CWUDU0011I: Exporting service, serviceKey[{0}]. Indicates that the businessService with the specified key is being exported. None. error.init.preparedStatement.failed=CWUDU0111E: Error occurred trying to create PreparedStatements. Check database configuration. An unexpected SQLException occurred preparing a SQL statement for execution. Turn on trace logging and look for the SQLException that is recorded. error.stub.tModelCreate=CWUDU0069E: Could not create minimal entity for tModel with tModelKey[{0}]. The minimal data necessary for a valid tModel could not be inserted in the target UDDI registry database. Check the database URL, userid and password values are correct in the configuration file, and that the database manager is running. message.delete.start=CWUDU0023I: Deleting entities... Indicates the delete function has started. None. error.inquiryURL.malformed=CWUDU0079E: The inquiryURL is malformed: {0} The inquiry URL specified in the configuration file is not valid. Correct the value for the inquiry URLs (fromInquiryURL and toInquiryURL) in the configuration file. message.import.service=CWUDU0018I: Importing service, serviceKey[{0}]. Indicates that the businessService with the specified key is being imported. None. error.resultFileWrite.failed=CWUDU0103E: Error occurred while creating results file. A problem occurred when writing the results file. Turn on trace logging and look for the Exception that is recorded. error.traceFile.closeFailed=CWUDU0053E: Unable to cloes the trace file: {0} The attempt to close the trace log file failed. The disk might be full. If so, clear some space or direct log output to a different disk. error.jsseprovider.notInstantiated=CWUDU0145E: The configured JSSE Provider ({0}) could not be instantiated. The JSSE Provider class name given in the jsse.provider property cannot be instantiated. Check that the class name is not an interface or abstract class. error.keyFile.IOException=CWUDU0048E: Unable to read the keyFile file: {0} The keys file could not be read due to an IO error. Check that the current user has permission to read the file. error.deleteTModelFailed=CWUDU0094E: Could not delete tModel for tModelKey[{0}]. The UDDI4J operation to delete the tModel with the specified key failed. Check userid and password property values in the configuration file and that the entity exists on the target UDDI registry. message.created.tModelStub=CWUDU0124I: Created tModel minimal entity with tModelKey [{0}]. Indicates the minimal data required for a tModel has successfully been inserted in the target UDDI registry database. None. error.exception=CWUDU0056E: Exception: General purpose message prefix used for reporting exceptions. None. message.delete.end=CWUDU0028I: Deleted {0} entities. Indicates that the delete function completed, and shows the number of entities deleted. None. error.findFailed.businesses=CWUDU0130E: Find businesses failed. The UDDI4J find businesses operation did not complete. Check the configuration properties for the source registry, such as fromInquiryURL. error.cmdLine.keyFileSpecified=CWUDU0062W: Unexpected argument: {0} (entity key file is already specified). The entity type argument cannot be specified if the keysFile argument has already been supplied. Specify arguments in accordance with the usage message. message.created.serviceStub=CWUDU0122I: Created service minimal entity with serviceKey [{0}]. Indicates the minimal data required for a businessService has successfully been inserted in the target UDDI registry database. None. error.keyFile.fileNotFound=CWUDU0047E: Unable to find the keyFile file: {0} The keys file could not be located at the specified path. Check the file name and path are correct and that the file exists. message.xml.parserFeature.unrecognised=CWUDU0037E: Unrecognized parser feature: {0} A parser feature set by the UDDI Utility Tools is not recognized by the parser. Check you are using the correct type and level of XML parser. If correct, contact your IBM support center. error.missingNodeId=CWUDU0136E: node ID value could not be found in UDDI database. The UDDI Registries Node ID could not be found in the UDDI database. Check that the UDDI application and database have initialized correctly. error.stub.creationFailed=CWUDU0104E: Minimal entity creation failed. An unexpected error occured when creating the entity. Turn on trace logging and look for the Exception that is recorded. error.definitionFile.readError=CWUDU0051E: Unable to read UDDI Entity definition file. {0} The Entity Definition File could not be read due to an IO error. Check that the current user has permission to read the file. message.import.start=CWUDU0016I: Importing entities... Indicates the import function has started. None. message.delete.tModel=CWUDU0027I: Deleting tModel, tModelKey[{0}]. Indicates that the tModel with the specified key is being deleted. None. error.stub.businessDelete=CWUDU0140E: Could not delete minimal entity for Business with businessKey[{0}]. The entity with the supplied Business key could not be located and therefore deleted. Ensure Business key is correct. message.export.binding=CWUDU0012I: Exporting binding, bindingKey[{0}]. Indicates that the bindingTemplate with the specified key is being exported. None. message.xml.parserProperty.unrecognised=CWUDU0039E: Unrecognized parser property: {0}, value: {1} A parser property set by the UDDI Utility Tools is not recognized by the parser. Check you are using the correct type and level of XML parser. If correct, contact your IBM support center. message.deserializing.start=CWUDU0031I: Deserializing... Indicates that reading of the Entity Definition File and creation of UDDI entities has started. None. message.export.business=CWUDU0010I: Exporting business, businessKey[{0}]. Indicates that the businessEntity with the specified key is being exported. None. message.import.binding=CWUDU0019I: Importing binding, bindingKey[{0}]. Indicates that the bindingTemplate with the specified key is being imported. None. error.findFailed.bindings=CWUDU0133E: Find bindings failed. The UDDI4J find bindings operation did not complete. Check the configuration properties for the source registry, such as fromInquiryURL. message.export.tModel=CWUDU0013I: Exporting tModel, tModelKey[{0}]. Indicates that the tModel with the specified key is being exported. None. message.export.start=CWUDU0009I: Exporting entities... Indicates the export function has started. None. error.cmdLine.repeatedFunction=CWUDU0057W: Only one function may be specified on the command line. Multiple function commands were entered on the command line. Specify one function in accordance with the usage message. message.delete.service=CWUDU0025I: Deleting service, serviceKey[{0}]. Indicates that the businessService with the specified key is being deleted. None. message.created.businessStub=CWUDU0121I: Created business minimal entity with businessKey [{0}]. Indicates the minimal data required for a businessEntity has successfully been inserted in the target UDDI registry database. None. error.discoverPublisher.failed=CWUDU0077E: An error occurred trying to discover the publisher. An unexpected Exception occurred when trying to discover the publisher. Turn on trace logging and look for the Exception that is recorded. error.connection.URL=CWUDU0095E: Could not reach {0}. The UDDI Registry could not be contacted. Check the correct URLs are specified in the UDDIUtilityTools.properties file. error.getServiceFailed=CWUDU0082E: Could not get service detail for serviceKey[{0}]. The get service operation failed on the source registry. Check the key exists in the source registry. message.delete.business=CWUDU0024I: Deleting business, businessKey[{0}]. Indicates that the businessEntity with the specified key is being deleted. None. error.findFailed.relatedBusinesses=CWUDU0129E: Find related businesses failed. The UDDI4J find related businesses operation did not complete. Check the configuration properties for the source registry, such as fromInquiryURL. error.getTModelFailed=CWUDU0081E: Could not get tModel detail for tModelKey[{0}]. The get tModel operation failed on the source registry. Check the key exists in the source registry. error.cmdLine.noKeys=CWUDU0065E: No entity keys were specified. A keys file or an entity type and key value must be specified for functions using keys. Specify arguments in accordance with the usage message. error.stub.businessCreate=CWUDU0071E: Could not create minimal entity for Business with businessKey[{0}]. The minimal data necessary for a valid businessEntity could not be inserted in the target UDDI registry database. Check the database URL, userid and password values are correct in the configuration file, and that the database manager is running. error.stub.serviceError=CWUDU0142E: Invalid sequence number for service: {0}. The ServiceStub has a sequence number that is not valid. Ensure the sequence number is greater than zero. error.commit.failed=CWUDU0106E: Unable to commit transaction. The insertion of minimal entity data during the import function failed to commit to the database. Check the database configuration. If necessary, turn on trace logging and look for the SQLException that is recorded. error.xmlDoc.createFailed=CWUDU0073E: There was an error while trying to create an XML Document. An attempt to create the Entity Definition File failed. Check the file path specified in the configuration file for the Entity Definition File is valid and is not set to be read only. error.promote.failed=CWUDU0102E: Promotion failed. The promote function failed to complete. Check the configuration properties file has correct settings.