BAD_OBJECT_CWSIA0185=CWSIA0185E: An incorrect object of type {0} was provided. The writeObject method was provided with an object parameter that was not a primitive wrapper type. Correct the application to ensure that only objects of the permitted types are passed as parameters to the writeObject method. CONNECTION_CLOSED_CWSIA0021=CWSIA0021E: This connection is closed. An application called a method that must not be used after the connection is closed. Ensure that the connection is not closed before calling the method. INBOUND_MSG_ERROR_CWSIA0103=CWSIA0103E: An exception occurred while receiving a message: {0}. While receiving a message an error occurred that caused the operation to fail. See the linked error message for more information. SEND_FAILED_CWSIA0063=CWSIA0063E: Failed to send to {0} A problem was encountered whilst sending a message. See the linked error message for more information. DEST_SPECIFIED_ON_SEND_CWSIA0066=CWSIA0066E: It is not valid to specify a destination when sending from this producer. The producer was created with a specified destination; it is not valid to specify a destination again when sending a message. Change the application so that a send method that does not specify a destination is used, or specify a null destination when creating the producer. ASYNC_EXCEPTION_CWSIA0341=CWSIA0341E: Exception received during asynchronous processing: {0} An exception originated outside of user code while asynchronous delivery was running. See the linked error message for more information. END_STREAM_CWSIA0162=CWSIA0162I: The end of the message stream has been reached. The end of the message content has been reached. This is normal if the reading application does not know how much data to expect. No action required. RESERVED_PROPNAME_CWSIA0113=CWSIA0113E: The property name {0} is reserved and cannot be set. The supplied property name begins with the JMS prefix, but is not one of the supported, settable properties. Modify the property name. EXCEPTION_RECEIVED_CWSIA0022=CWSIA0022E: An exception was received during the call to the method {1}: {0}. Another component detected an error during the execution of the specified method. See the linked error message for more information. INVALID_URI_ELEMENT_CWSIA0385=CWSIA0385E: It is not permitted for a destination URI to specify a queue manager, as found in URI : {0} The use of queue managers as specified in the destination URI is not supported. Specify a URI that does not use a queue manager. PRODUCER_CLOSED_CWSIA0061=CWSIA0061E: This message producer is closed. An application called a method that must not be used after the message producer is closed. Ensure that the message producer is not closed before calling the method. INVALID_URI_ELEMENT_CWSIA0384=CWSIA0384E: The URI element {0}={1} could not be set as a property on the Destination object, from URI {2} The name property of the URI element identified could not be decoded into a valid Destination property. Ensure that the name property identified is a valid property for Destination objects. MGD_ENV_CWSIA0025=CWSIA0025E: The method {0} is not permitted in this container. A method was called that is not permitted in the current container. Remove the call to the method. AUTHORIZATION_FAILED_CWSIA0006=CWSIA0006E: The authorization for the supplied user name was not successful. The user name is not authorized to access the resource. See the linked error message for the user name. Ensure that it is correctly authorized for the required resource on the system. WRITE_ONLY_MESSAGE_BODY_CWSIA0109=CWSIA0109E: It is not permitted to call method {0} on the message because the message body is write-only. A user application has attempted to read a write-only message body. Change the application program to remove this behavior, or call the reset method first. CLIENT_ID_FIXED_CWSIA0023=CWSIA0023E: The client ID for this connection is read-only. An application has tried to set the client ID, which has already been set or administratively configured. Ensure that the client ID is not set after it has been previously set or configured. INVALID_VALUE_CWSIA0116=CWSIA0116E: The specified value {1} is not allowed for {0}. The value provided is not allowed for the property specified. Enter a value that is supported for the property. EXCEPTION_RECEIVED_CWSIA0007=CWSIA0007E: An exception was received during the call to the method {1}: {0}. Another component detected an error during the execution of the specified method. See the linked error message for more information. DURABLE_SUB_HOME_NOT_SPECIFIED_CWSIA0056=CWSIA0056E: A null or empty value was specified for the durableSubscriptionHome property of the ConnectionFactory The durableSubscriptionHome property must be set before a connection is created that will use durable subscriptions. Set the ConnectionFactory durableSubscriptionHome property to the name of the messaging engine on which the subscription should be localized. DATA_STREAM_PROBLEM_CWSIA0182=CWSIA0182E: An internal error occurred while writing to the data stream. A problem has occurred with data streams used for format conversion of float and double values. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . INVALID_VALUE_CWSIA0068=CWSIA0068E: The specified value {1} is not allowed for {0}. The value provided is not allowed for the property specified. Enter a value that is supported for the property. READ_ONLY_MESSAGE_BODY_CWSIA0107=CWSIA0107E: It is not permitted to call method {0} on the message because the message body is read-only. A user application has attempted to change the body of a message which is currently read-only. Change the application program to remove this behavior, or set the message body to be writeable by first calling the clearBody method. INVALID_PROPNAME_CWSIA0112=CWSIA0112E: The property name {0} is not a valid Java identifier. The supplied property name does not conform to the format described in the JMS specification. Modify the property name. CONSUMER_AUTH_ERROR_CWSIA0090=CWSIA0090E: The user does not have authorization to carry out this operation. See the linked exception for details. The linked error message describes the authority required to carry out this operation. The administrator must grant the required authority to the relevant user. CONN_CLOSED_CWSIA0041=CWSIA0041E: Connection closed The connection was closed during the execution of this method. Repeat the call using a new connection. INTERNAL_ERROR_CWSIA0386=CWSIA0386E: An internal error occurred. This exception is unexpected. The cause is not immediately known. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . BROWSE_FAILED_CWSIA0145=CWSIA0145E: Unable to browse destination {0} A problem was encountered whilst browsing the destination. See the linked error message for more information. DESTINATION_BLOCKED_PSBREPLY_CWSIA0284=CWSIA0284E: There is insufficient information to route a message to this destination: {0} The publish/subscribe broker profile topic mapping used to transfer the original publication from MQ does not contain a broker input queue. Add the broker input queue name to the appropriate broker profile topic mapping. UNSUPPORTED_FUNC_CWSIA0484=CWSIA0484E: {0} is not supported in this release. The application has attempted to use a feature or capability that is not supported by the current release of the software. Remove the code that attempts to use this capability or update to a later release of the software, if available. UNSUPPORTED_FUNC_CWSIA0482=CWSIA0482E: {0} is not supported in this release. The application has attempted to use a feature or capability that is not supported by the current release of the software. Remove the code that attempts to use this capability or update to a later release of the software, if available. BROWSER_CLOSED_CWSIA0142=CWSIA0142E: This queue browser is closed. An application called a method that must not be used after the queue browser is closed. Ensure that the queue browser is not closed before calling the method. NOT_AUTH_CWSIA0224=CWSIA0224E: Not authorised to access durable subscription The current user does not have authorization to access the durable subscription. Check the userID has the required access to the resources needed. See the linked error message for more information. ME_TERMINATED_CWSIA0344=CWSIA0344E: The connection has been closed because the messaging engine has terminated. The messaging engine has been shutdown leaving the connection unusable. Restart the messaging engine and reconnect. DEST_LOCKED_CWSIA0058=CWSIA0058E: Temporary topic locked The temporary topic could not be deleted. It may have active subscribers. Close any subscribers to the topic and retry the call. UNSUPPORTED_OPERATION_CWSIA0045=CWSIA0045E: The optional JMS operation {0} is not supported by this implementation. The application called a method that is optional in the JMS specification, and that is not supported by this implementation. Remove calls to the named methods from the application. WRITE_PROBLEM_CWSIA0186=CWSIA0186E: An internal error occurred. There is a problem in writing to the message. An error occured while trying to write an item to the message. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . INVALID_VALUE_CWSIA0048=CWSIA0048E: The specified value {1} is not allowed for {0}. The value provided is not allowed for the property specified. Enter a value that is supported for the property. PRODUCER_AUTH_ERROR_CWSIA0069=CWSIA0069E: The user does not have authorization to carry out this operation. See the linked exception for details. The linked error message contains details of the authority required to carry out this operation. The administrator must grant the required authority to the relevant user. UNABLE_TO_CREATE_FACTORY_CWSIA0391=CWSIA0391E: An internal error occurred. An object of class {0} can not be created because the JAR file {1} could not be found. This exception is unexpected. The cause is not immediately known. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . INVALID_OP_FOR_NONTRANS_SESSION_CWSIA0042=CWSIA0042E: It is not valid to call the {0} method on a nontransacted session. The application called a method that must not be called on a non-transacted session. Change the application program to remove this behavior. INTERNAL_ERROR_CWSIA0362=CWSIA0362E: An internal error has occurred. ProbeID: {0}. Extra information: {1} : {2} This exception is unexpected. The cause is not immediately known. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . RESERVED_DEST_PREFIX_CWSIA0383=CWSIA0383E: The reserved destination prefix {0} was found in URI {1} The identified destination prefix is reserved. Consider using the prefix 'queue://' for a queue destination or 'topic://' for a topic destination. JCA_RESOURCE_EXC_CWSIA0005=CWSIA0005E: The JCA runtime failed to allocate a connection. An attempt to create a JMS connection failed because of an exception from the JCA runtime environment. See the linked exception for more information. INVALID_FOR_UNCONSUMED_MSG_CWSIA0110=CWSIA0110E: It is only permitted to call the operation {0} on a message that was obtained using a receive call, or a message presented to a MessageListener. The message has either been constructed by the application or has been obtained using a queue browser, and so does not support the stated operation. Ensure that applications only invoke this operation on messages obtained using a receive call, or on messages presented to a MessageListener. UNABLE_TO_CREATE_FACTORY_CWSIA0008=CWSIA0008E: An internal error occurred. An object of class {0} can not be created because the JAR file {1} could not be found. This exception is unexpected. The cause is not immediately known. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . READ_ONLY_MESSAGE_PROPERTY_CWSIA0108=CWSIA0108E: It is not permitted to call method {0} on the message because the message properties are read-only. A user application has attempted to change the property of a message which is currently read-only. Change the application program to remove this behavior, or set the message property to be writeable by first calling the clearProperties method. UNABLE_TO_CREATE_FACTORY_CWSIA0001=CWSIA0001E: An internal error occurred. An object of class {0} can not be created because the JAR file {1} could not be found. This exception is unexpected. The cause is not immediately known. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . UNSUPPORTED_ENCODING_CWSIA0360=CWSIA0360E: The required character set encoding {0} is not supported. The specified character set is required for operation of this functionality, but could not found. Make the specified character set available for use by this JVM. INVALID_VALUE_CWSIA0003=CWSIA0003E: The specified value {1} is not allowed for {0}. The value provided is not allowed for the property specified. Enter a value that is supported for the property. INVALID_SELECTOR_CWSIA0147=CWSIA0147E: The selector is not valid. An incorrect message selector was supplied. See the linked error message for more information. MC_CONN_STOPPED_CWSIA0087=CWSIA0087W: An attempt was made to consume a message while the connection was stopped - {0} A stopped connection will not deliver messages to message consumers. An attempt to consume messages from a stopped connection might indicate an error in the application logic. Check whether consuming from a stopped connection is an expected behaviour of the application. If it is not, correct the application design. FAILED_TO_CREATE_BSESSION_CWSIA0143=CWSIA0143E: An internal error occurred. The createBrowserSession call returned null instead of a valid BrowserSession object. This exception is unexpected. The cause is not immediately known. INITIALIZATION_ERROR_CWSIA0002=CWSIA0002E: An internal error occurred. It was not possible to instantiate a required class: {0} This exception is unexpected. The cause is not immediately known. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . MALFORMED_DESCRIPTOR_CWSIA0047=CWSIA0047E: The name {1} does not describe an object of type {0}. A queue name was supplied to a createTopic call or a topic name was supplied to a createQueue call. Change the name to the correct object type. TEMPORARY_CWSIA0500=CWSIA0500E: {0} See any linked error message for more information. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . UNSUPPORTED_FUNC_CWSIA0026=CWSIA0026E: {0} is not supported in this release. The application has attempted to use a feature or capability that is not supported by the current release of the software. Remove the code that attempts to use this capability or update to a later release of the software, if available. NULL_BUFFER_CWSIA0161=CWSIA0161E: The read buffer is null. A null reference was passed to the StreamMessage.readBytes method, so no data could be returned. Pass a suitably sized buffer into the readBytes method. BROWSER_AUTH_ERROR_CWSIA0149=CWSIA0149E: The user does not have authorization to carry out this operation. See the linked exception for details. The linked error message contains details of the authority required to carry out this operation. The administrator must grant the required authority to the relevant user. NO_DEST_SPECIFIED_ON_SEND_CWSIA0065=CWSIA0065E: A destination must be specified when sending from this producer. The producer was created with a null destination and a destination was not supplied on the send method. Change the application so that a send method that specifies a destination is used, or specify a destination when creating the producer. EXCEPTION_RECEIVED_CWSIA0241=CWSIA0241E: An exception was received during the call to the method {1}: {0}. Another component detected an error during the execution of the specified method. See the linked error message for more information. JCA_CREATE_SESS_CWSIA0024=CWSIA0024E: The JCA runtime failed to create a session. A call to the JCA runtime environment to create a session generated an error. See the linked error message for more information. UNKNOWN_PROPERTY_CWSIA0363=CWSIA0363E: The JMSDestination or JMSReplyTo contains an unknown property name: {0}. A JMS message has been received from a later release of the Application Server and has been given to an application. The application has then attempted to retrieve either the JMSDestination or the JMSReplyTo message header from the message. The message header field cannot be retrieved because one of its properties is not supported on this release. Remove the unsupported property from the JMSDestination or JMSReplyTo used by the sending application. The unsupported property may have been specified directly by the sending application or may have been specified on the configuration of the JMS Queue. INVALID_SELECTOR_CWSIA0083=CWSIA0083E: The selector is not valid. An incorrect message selector was supplied. See the linked error message for more information. SESSION_CLOSED_CWSIA0049=CWSIA0049E: This session is closed. An application called a method that must not be used after the session is closed. Ensure that the session in not closed before calling the method. DESTINATION_DOES_NOT_EXIST_CWSIA0052=CWSIA0052E: The destination {0} does not exist. The application tried to connect to a destination that is not defined. Define the required destination and repeat the operation. EXCEPTION_RECEIVED_CWSIA0190=CWSIA0190E: An exception was received during the call to the method {1}: {0}. Another component detected an error during the execution of the specified method. See the linked error message for more information. INTERNAL_INVALID_VALUE_CWSIA0361=CWSIA0361E: An internal error has occurred because {0} was specified for {1} This exception is unexpected. The cause is not immediately known. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . BAD_ESCAPE_CHAR_CWSIA0387=CWSIA0387E: String contained an inappropriate escape sequence: {0} This exception is unexpected. The cause is not immediately known. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . INCOMPLETE_BYTE_ARRAY_CWSIA0163=CWSIA0163E: The StreamMessage byte array was incompletely read. An attempt has been made to read the next field from the StreamMessage before the current byte array field has been read completely. Ensure that the user code fully reads any byte array before attempting to read the next field. EXCEPTION_RECEIVED_CWSIA0221=CWSIA0221E: An exception was received during the call to the method {1}: {0}. Another component detected an error during the execution of the specified method. See the linked error message for more information. SERIALIZATION_EXCEPTION_CWSIA0121=CWSIA0121E: An exception occurred while serializing the object: {0}. The object could not be serialized because of an error. See the linked error message for more information. INVALID_VALUE_CWSIA0321=CWSIA0321E: The specified value {1} is not allowed for {0}. The value provided is not allowed for the property specified. Enter a value that is supported for the property. INVALID_VALUE_CWSIA0281=CWSIA0281E: The specified value {1} is not allowed for {0}. The given value is not allowed for the property specified. Change the value to a value that is supported for the property. MALFORMED_URI_ELEMENT_CWSIA0382=CWSIA0382E: The URI element {0} is malformed in URI {1} The name-value pair element identified is malformed, possibly because it does not contain both a name and a value. Check that the name-value pair element is correctly formed. BAD_SELECT_CWSIA0225=CWSIA0225E: The provided message selector was not valid. A problem was encountered interpreting the provided selector string. Check the selector string and correct any errors. JMS_IBM_INVALID_TYPE_CWSIA0114=CWSIA0114E: The property {0} should be set using type {1}, not {2}. JMS_IBM properties must be set using specific variable types. Correct the application code to use the required variable type to set this JMS_IBM property. FIELD_NOT_SET_CWSIA0105=CWSIA0105E: The message field {0} has not been set. An application attempted to retrieve the value of a field that has not been set. Set the value of the field before retrieving it. ML_THREW_EXCPTN_CWSIA0089=CWSIA0089E: A RuntimeException was thrown by MessageListener.onMessage A MessageConsumer with a registered MessageListener received an error message from the onMessage method. Change the onMessage method to avoid throwing exceptions. NOT_AUTH_CWSIA0044=CWSIA0044E: Not authorised to unsubscribe durable subscription The current user is not authorized to unsubscribe the durable subscription. Check that the userID has the required access to the resources needed. See the linked error message for more information. BAD_TOPICSPACE_CWSIA0226=CWSIA0226E: Unable to create durable subscriber for given topic. A durable subscriber cannot be created because of a problem with the topic space. See the linked error message for details. If the topic space did not exist, create it or use one that does exist. If the topic was a temporary one, use a non-durable subscriber or change to a permanent topic. INVALID_VALUE_CWSIA0301=CWSIA0301E: The specified value {1} is not allowed for {0}. The value provided is not allowed for the property specified. Enter a value that is supported for the property. INVALID_VALUE_CWSIA0261=CWSIA0261E: The specified value {1} is not allowed for {0}. The given value is not allowed for the property specified. Change the value to a value that is supported for the property. DESERIALIZATION_EXCEPTION_CWSIA0122=CWSIA0122E: An exception occurred deserializing a message, exception: {0}. The message could not be deserialized because of the exception shown. See the linked error message for more imformation. MANY_PRODUCERS_WARNING_CWSIA0055=CWSIA0055W: There are currently {0} open JMS Producers for the Session. This may indicate that the Producers are not being closed when the application has finished using them. The Producer was created at {1} Having a large number of producers open can have a negative impact or performance. Ensure that the application closes producers that are no longer required. UTF8_CONV_CWSIA0184=CWSIA0184E: The UTF-8 conversion failed. A problem occurred during the reading or writing of a UTF-8 string. The most common problem is attempting to write a string longer than 65535 characters. See the linked error message for further information. INVALID_OP_FOR_TRANS_SESSION_CWSIA0050=CWSIA0050E: It is not valid to call the {0} method on a transacted session. The application called a method that must not be called on a transacted session. Change the application program to remove this behavior. DSUB_LOCKED_CWSIA0043=CWSIA0043E: Subscription locked You cannot unsubscribe from a durable subscription that has an active consumer or holds messages that are locked under an active transaction. Ensure that there is no active consumer, then retry the unsubscribe method. MSG_CREATE_FAILED_CWSIA0111=CWSIA0111E: An error occurred while trying to create the message. See the linked exception for more details. It was not possible to instatiate a message in JMS because an error occurred in another part of the system. See the linked error message for more information. MC_CREATE_FAILED_CWSIA0086=CWSIA0086E: Failed to create a MessageConsumer for {0} A problem was encountered whilst creating a MessageConsumer. See the linked error message for more information. INVALID_OBJECT_TYPE_CWSIA0102=CWSIA0102E: The type {0} is not valid for use as object property {1}. An application tried to set an object property using an object type that is not permitted by the JMS specification. Use a permitted object type, which is one of the primitive wrapper classes or String objects. EXCEPTION_RECEIVED_CWSIA0144=CWSIA0144E: An exception was received during the call to the method {1}: {0}. Another component detected an error during the execution of the specified method. See the linked error message for more information. ME_QUIESCE_CWSIA0342=CWSIA0342E: The messaging engine is shutting down. The messaging engine to which the application is attached has been shut down. This is a signal to the application to disconnect from the messaging engine. FOREIGN_IMPLEMENTATION_CWSIA0046=CWSIA0046E: The parameter {0} is from a foreign implementation that is not supported. The user application passed in an implementation class from an unsupported JMS provider. Replace the unsupported object with one that is supported. NO_MESSAGE_AVAILABLE_CWSIA0141=CWSIA0141E: The queue browser has no messages available. The application requested a message from a queue browser when none was available. Modify the application to handle this error or use the hasMoreElements method to check whether further messages are available. ASYNC_IN_PROGRESS_CWSIA0082=CWSIA0082E: Synchronous method call not permitted when a session is being used asynchronously: {0} The JMS specification does not permit the use of a session for synchronous methods when asynchronous message delivery is running. If you want to use both synchronous methods and asynchronous delivery simultaneously, create a separate session. COMMS_FAILURE_CWSIA0343=CWSIA0343E: The connection has been closed because of the following exception: {0} A communications failure has resulted in the loss of the connection to the messaging engine. See the linked error message for more information. CONN_CLOSED_CWSIA0222=CWSIA0222E: Connection closed The connection was closed during the execution of this method. Repeat the call using a new connection. PROMISE_BROKEN_EXCEPTION_CWSIA0511=CWSIA0511E: Calling BytesMessage.writeBytes(byte[]) more than once is not permitted because the ConnectionFactory or ActivationSpecification property 'producerDoesNotModifyPayloadAfterSet' has been enabled. The message producer has promised not to modify message payloads after setting them. Only one call to BytesMessage.writeBytes(byte[] value) is allowed in this situation. There are three actions available to remedy the problem: 1) modify the application code to remove the offending call, 2) call BytesMessage.clearBody() after the first call, or 3) change the administration option that indicates that the promise is in place. Note that disabling the administration option may result in reduced performance. PROMISE_BROKEN_EXCEPTION_CWSIA0510=CWSIA0510E: Calls to the BytesMessage method {0} are not permitted because the ConnectionFactory or ActivationSpecification property ''producerDoesNotModifyPayloadAfterSet'' has been enabled. The message producer has promised not to modify message payloads after setting them. Calls to certain methods on message objects are considered to break this promise. Either modify the application code to remove the offending call, or change the administration option that indicates that the promise is in place. Note that disabling the administration option may result in reduced performance. NULL_CHAR_CWSIA0164=CWSIA0164E: It is not possible to return null as a character. An attempt was made to read a StreamMessage field containing null using the readChar method. Avoid reading nulls using the readChar method. MANY_CONSUMERS_WARNING_CWSIA0059=CWSIA0059W: There are currently {0} open JMS Consumers for the Session. This may indicate that the Consumers are not being closed when the application has finished using them. The Consumer was created at {1} Having a large number of consumers open on a session can have a negative impact on performance. Ensure that the application closes consumers that are no longer necessary. EXCEPTION_RECEIVED_CWSIA0085=CWSIA0085E: An exception was received during the call to the method {1}: {0}. Another component detected an error during the execution of the specified method. See the linked error message for more information. MANY_SESSIONS_WARNING_CWSIA0027=CWSIA0027W: There are currently {0} open JMS Sessions for the Connection. This may indicate that the Sessions are not being closed when the application has finished using them. The Session was created at {1} Having a large number of sessions open on a connection can have a negative impact on performance. Ensure that the application closes sessions that are no longer required. INVALID_FIELD_NAME_CWSIA0106=CWSIA0106E: A null or empty string field name is not permitted. A user application has attempted to set a field using a name that is not valid, for example, null or empty String. Use a valid field name. MGD_ENV_CWSIA0084=CWSIA0084E: The method {0} is not permitted in this container. A method was called that is not permitted in the current container. Remove the call to the method. INBOUND_MSG_ERROR_CWSIA0148=CWSIA0148E: An exception occurred while receiving a message: {0}. While receiving a message an error occurred that caused the operation to fail. See the linked error message for more information. EXCEPTION_RECEIVED_CWSIA0115=CWSIA0115E: An exception was received during the call to the method {1}: {0}. Another component detected an error during the execution of the specified method. See the linked error message for more information. AUTHENTICATION_FAILED_CWSIA0004=CWSIA0004E: The authentication for the supplied user name {0} and the associated password was not successful. Authentication failed using the supplied details because the user name or the password is incorrect. See the linked error message for more information.Check that the user name and password are correct, and have been defined to the system. DEST_LOCKED_CWSIA0223=CWSIA0223E: Subscription locked The durable subscription is not accepting consumers. It may already have an active subscriber, or it may have been administratively disabled. See the linked error message for more information. Check the application(s) for multiple attempts to access a single durable subscription. The JMS specification prohibits this but, if absolutely required, see the shareDurableSubscriptions option on the connection factory. INVALID_OP_FOR_CLASS_CWSIA0483=CWSIA0483E: It is not permitted to call method {0} on class {1}. The application called a method that is not supported by the JMS specification. Change the application program to remove this behavior. INVALID_OP_FOR_CLASS_CWSIA0481=CWSIA0481E: It is not permitted to call method {0} on class {1}. The application called a method that is not supported by the JMS specification. Change the application program to remove this behavior. UNABLE_TO_CREATE_FACTORY_CWSIA0201=CWSIA0201E: An internal error occurred. An object of class {0} can not be created because the JAR file {1} could not be found. This exception is unexpected. The cause is not immediately known. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . CONNECTION_CLOSED_CWSIA0051=CWSIA0051E: This connection associated with this session is closed. The application called a method on a session object for which the associated Connection has been closed. Ensure that the connection is not closed before calling the method. DURABLE_SUB_DOES_NOT_EXIST_CWSIA0054=CWSIA0054E: The durable subscription with subscription name {0} does not exist. The application tried to unsubscribe a durable subscription which does not exist. No action is required unless the application expected the subscription to exist, in which case it should previously have created it. END_BYTESMESSAGE_CWSIA0183=CWSIA0183I: An attempt was made to read beyond the end of the message. An attempt was made to read beyond the end of the message. This might be a normal condition if an application has been coded to read variable length data using the JMS 1.0.2 specification. If necessary, recode the application to use the getBodyLength method. AUTHORIZATION_FAILED_CWSIA0057=CWSIA0057E: The authorization for {0} was not successful. The user name is not authorized to access the resource. See the linked error message for the user name and ensure that it is correctly authorized to the required resource on the system. MP_CREATE_FAILED_CWSIA0062=CWSIA0062E: Failed to create a MessageProducer for {0} A problem was encountered while creating a MessageProducer. See the linked error message for more information. INTERNAL_ERROR_CWSIA0499=CWSIA0499E: An internal error occurred. The value {1} is not valid for parameter or variable {0}. This exception is unexpected. The cause is not immediately known. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . EXCEPTION_RECEIVED_CWSIA0067=CWSIA0067E: An exception was received during the call to the method {1}: {0}. Another component detected an error during the execution of the specified method. See the linked error message for more information. BAD_ENCODING_CWSIA0181=CWSIA0181E: The encoding is not valid for string {0}. The supplied value does not have a known encoding. Ensure that the application supplies a value from the defined list of encodings. DESTINATION_BLOCKED_CWSIA0283=CWSIA0283E: The destination in question is blocked from producing/receiving messages with a reason code of {0} The destination object does not have sufficient information for the production and consumption of messages. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . EXCEPTION_RECEIVED_CWSIA0053=CWSIA0053E: An exception was received during the call to the method {1}: {0}. Another component detected an error during the execution of the specified method. See the linked error message for more information. CONSUMER_CLOSED_CWSIA0081=CWSIA0081E: This message consumer is closed. An application called a method that must not be used after the message consumer is closed. Ensure that the message consumer is not closed before calling the method. INVALID_TYPE_CONVERSION_CWSIA0104=CWSIA0104E: The conversion of the item {0} from type {1} to type {2} is not permitted. The JMS specification does not permit conversion between the two specified data types. Retrieve the named item using one of the permitted conversions. BAD_OBJECT_CWSIA0189=CWSIA0189E: An incorrect object of type {0} was provided. The writeObject method was provided with an object parameter that was not a primitive wrapper type. Correct the application to ensure that only objects of the permitted types are passed as parameters to the writeObject method. BAD_OBJECT_CWSIA0188=CWSIA0188E: An incorrect object of type {0} was provided. The writeObject method was provided with an object parameter that was not a primitive wrapper type. Correct the application to ensure that only objects of the permitted types are passed as parameters to the writeObject method.