WASX8025W=WASX8025W: AdminConfig object is not available. The AdminConfig command cannot be run because the configuration service is not available. Specify a server with a running configuration service and reissue the wsadmin command. WASX7345E=WASX7345E: Cannot find node "{0}" in configuration data. The wsadmin tool cannot run the AdminControl startServer command because there is no node of the specified name in the configuration. Verify that the node name is spelled correctly. ADMINCONFIG_HELP_LISTTEMPLATES=WASX7211I: Method: listTemplates Arguments: type Description: Returns a list of the templates available for the given type. These templates may be used in invocations of createUsingTemplate. Method: listTemplates Arguments: type, match Description: Returns a list of the templates with display names that contain the string specified by "match" available for the given type. These templates may be used in invocations of createUsingTemplate. Method: listTemplates Arguments: type, pattern Description: Returns a list of the templates with display names that contain the string matching with the wildcard "pattern" for the given type. These templates may be used in invocations of createUsingTemplate. This message is for informational purposes only. No action is required. WASX7344E=WASX7344E: Node name is required when the client is connected to process type "{0}". The wsadmin tool cannot run the AdminControl startServer command because the node name is not specified. Specify the node name to locate the server in the startServer command. PORT_REQUIRES_ARG=WASX7005E: The "-port" option requires a port number. The wsadmin launcher has been invoked with the -port option, but no port number argument was found. Specify a port number for the -port option and reissue the wsadmin command. WASX8024I=WASX8024I: Cannot find the command or command group pattern: {0} The command pattern specified is not found, try different pattern. Ensure that the searching pattern correctly. WASX7343E=WASX7343E: The specified node name "{0}" is not the same as the node "{1}" this client is currently connected to.", The wsadmin tool cannot run the AdminControl startServer command because the node name that has been specified is not the same as the node name that is currently connected to by the node agent. Verify that the node name is spelled correctly. WASX8023E=WASX8023E: The upload file "{0}" does not exist for installation. The file is not uploaded for installation. Ensure that this file exists and is readable. WASX7487E=WASX7487E: Failed to import script libraries modules: {0}; {1} An error occured during importing script libraries modules. Correct the script libraries modules, then restart the wsadmin tool. WASX7486W=WASX7486W: This -clientMode option will be ignored because the -enableClientModule option is not specified. The -clientMode option has been specified, but the -enabledClientModule option has not been specified. The -clientMode option will be ignored. Specify the -enableClientModule option with the AdminApp install command. WASX7341W=WASX7341W: No "save" was performed before the interactive scripting session exited; configuration changes will not be saved. An interactive scripting session concluded without saving configuration changes. No configuration changes were saved. Invoke the AdminConfig "save" command to save your configuration changes. WASX7377W=WASX7377W: <typeClass> element with the same class name, {0}, found in {1} at line {2}. A type handler registerd to handle the same type class is included in the extension xml more than once. Remove the duplicate type handler in the extension xml file. ADMINAPP_HELP_PRECOMPILEJSPS=WASX7223I: "preCompileJSPs" option; use this option to specify that JSPs are to be precompiled. The default is nopreCompileJSPs. This message is for informational purposes only. No action is required. EXCEPTION_DECLARING_BEAN=WASX7318E: Received exception while declaring {0}; exception information: {1} An error has occurred during the initialization of the objects used by wsadmin. This exception is unexpected. The cause is not immediately known. ADMINAPP_HELP_ALLOWSERVICEREMOTEINCLUDE=WASX7452I: "allowServiceRemoteInclude" option; Enables an enterprise application to service an include request from an enterprise application with -allowDispatchRemoteInclude set to true. This message is for informational purposes only. No action is required. WASX8021E=WASX8021E: The wsadmin with version "{0}" connected to an incompatible server or deployment manager with node version "{1}", which is not supported. " The wsadmin tool is connecting to an incompatible version of the server or deployment manager node. Verify that the server or deployment manager node has same or higher version as the wsadmin tool. Connect to a compatible server or deployment manager node. APPEND_TRACE_REQUIRES_ARG=WASX7447E: "-appendtrace" option must be followed by a 'true' or 'false'. The wsadmin launcher did not run because no argument was found for the -appendtrace option. Specify a string value for the -appendtrace option and reissue the wsadmin command. HELP_HELP_NOTIFICATIONS=WASX7272I: Method: notifications Arguments: MBean Description: Display information about the notifications sent by the specified MBean. This message is for informational purposes only. No action is required. ADMINAPP_HELP_VALIDATEINSTALL=WASX7432I: "validateinstall" option; specifies desired level of application install validation. Valid option values are: off: no application deployment validation warn: perform application deployment validation and continue with the application deployment process even when there are reported warning or error messages. fail: perform application deployment validation and not to continue with the application deployment process when there are reported warning or error messages. The default is off. This message is for informational purposes only. No action is required. WASX7123E=WASX7123E: Unexpected "{0}" found. {1} The wsadmin tool found the specified character in an unexpected location in the input stream. Correct and reissue the command. DASH_C_NEEDS_FOLLOWING_COMMAND=WASX7002E: "-c" option must be followed by a command. The wsadmin launcher has been invoked with the "-c" option. This option requires that a string be supplied to be interpreted as a wsadmin command. Reissue the wsadmin command with a command string following the -c option. ADMINAPP_HELP_UPDATEINTERACTIVE=WASX7420I: Method: updateInteractive Arguments: application name, content type, options Description: updates the application specified by "application name" using update type specified by "content type" with options specified by "options". If content type is app or file, user is prompted for information about each relevant task. Valid update content type values are app - entire application file - a single file modulefile - a module partialapp - partial application All valid options for install command are valid for the update command. Additional update options are -operation - operation to be performed. Valid values are add - adds new contents addupdate - performs add or updates based on existence of contents in the application delete - deletes contents update - update existing contents This option is required if content type is file or modulefile. This option must have "update" as the value if content type is app. This option is ignored if content type is partialapp. -contents - file containing the contents to be added or updated. The specified file has to be local to the scripting client. This option is required except for delete operation. -contenturi - URI of the file to be added, updated, or removed from the application. This option is required if content type is file or modulefile. This option is ignored if content type is app or partialapp. The AdminApp "options" command may be used to get a list of all possible options for a given ear file. The AdminApp "help" command may be used to get more information about each particular option. This message is for informational purposes only. No action is required. ADMINAPP_HELP_DEPL.EXTENSION.REG=WASX7157I: "depl.extension.reg" option; specifies location of properties file for deployment extensions. This option is deprecated. There is no replacement for this option. This message is for informational purposes only. No action is required. WASX7376E=WASX7376E: Invalid element end-tag: {0} The reported element tag in the extension xml file is not supported. Remove the unsupported element tag in the extension xml file. WASX8020E=WASX8020E: An argument is required for parameter "{0}." The specified parameter requires an accompanying argument. For example, if you specify "-node" you need to follow "-node" with the name of a node: "-node mynode." Supply an argument for the indicated parameter. ADMINAPP_HELP_LIST=WASX7100I: Method: list Arguments: none Description: Lists all installed applications Method: list Arguments: target scope Description: List installed applications on a given "target scope" For example, WebSphere:cell=myCell,node=myNode,server=myServer or WebSphere:cell=myCell,cluster=myCluster. This message is for informational purposes only. No action is required. WASX7122E=WASX7122E: Expected "{0}" not found. {1} The wsadmin tool did not find the specified string in the expected location in the input stream. Correct and reissue the command. WASX7375E=WASX7375E: Element type {0} is already defined. The same element type is used more than once in the extension xml file. Remove the extra element type in the extension xml file. WASX7266I=WASX7266I: A was.policy file exists for this application; would you like to display it? This message is for informational purposes only. No action is required. ADMINCONTROL_GENERAL_HELP=WASX7027I: The AdminControl object enables the manipulation of MBeans running in a WebSphere server process. The number and type of MBeans available to the scripting client depends on the server to which the client is connected. If the client is connected to a Deployment Manager, then all the MBeans running in the Deployment Manager are visible as are all the MBeans running in the Node Agents connected to this Deployment Manager, and all the MBeans running in the application servers on those nodes. The following commands are supported by AdminControl; more detailed information about each of these commands is available by using the "help" command of AdminControl and supplying the name of the command as an argument. Note that many of these commands support two different sets of signatures: one that accepts and returns strings, and one low-level set that works with JMX objects like ObjectName and AttributeList. In most situations, the string signatures are likely to be more useful, but JMX-object signature versions are supplied as well. Each of these JMX-object signature commands has "_jmx" appended to the command name. Hence there is an "invoke" command, as well as a "invoke_jmx" command. completeObjectName Returns a String version of an object name given a template name getAttribute_jmx Given ObjectName and name of attribute, returns value of attribute getAttribute Given String version of ObjectName and name of attribute, returns value of attribute getAttributes_jmx Given ObjectName and array of attribute names, returns AttributeList. getAttributes Given String version of ObjectName and attribute names, returns String of name value pairs. Given String version of ObjectName, returns String of all name value pairs. getCell Returns the cell name of the connected server getConfigId Given String version of ObjectName, return a configuration ID for the corresponding configuration object, if any getDefaultDomain Returns "WebSphere" getDomainName Returns "WebSphere" getHost Returns String representation of connected host getMBeanCount Returns number of registered beans getMBeanInfo_jmx Given ObjectName, returns MBeanInfo structure for MBean getNode Returns the node name of the connected server getObjectInstance Given String version of ObjectName, returns ObjectInstance object that match. getPort Returns String representation of port in use getType Returns String representation of connection type in use help Shows help information invoke_jmx Given ObjectName, name of method, array of parameters and signature, invokes method on MBean specified invoke Invokes a method on the specified MBean isRegistered_jmx Returns true if supplied ObjectName is registered isRegistered Returns true if supplied String version of ObjectName is registered makeObjectName Returns an ObjectName built with the given string queryNames_jmx Given ObjectName and QueryExp, retrieves set of ObjectNames that match. queryNames Given String version of ObjectName, retrieves String of ObjectNames that match queryMBeans Given String version of ObjectName, returns a set of ObjectInstances object that match reconnect Reconnects with server setAttribute_jmx Given ObjectName and Attribute object, sets attribute for MBean specified setAttribute Given String version of ObjectName, attribute name and attribute value, sets attribute for MBean specified setAttributes_jmx Given ObjectName and AttributeList object, sets attributes for the MBean specified setAttributes Given String version of ObjectName, attribute name and value pairs, sets attributes for the MBean specified startServer Given the name of a server, starts that server stopServer Given the name of a server, stops that server testConnection Tests the connection to a DataSource object trace Sets the wsadmin trace specification This message is for informational purposes only. No action is required. WASX7374W=WASX7374W: Missing element type {0} in {1} at line {2}. Ignoring this {3} element type. The extension xml file contains an element type reported in this warning message with required element type missing. Add the missing element type reported in this message to the extension xml file. OPTION_NEEDS_FOLLOWING_FILENAME=WASX7003E: "{0}" option must be followed by a file name. The wsadmin launcher has been invoked with an option that requires the name of a file, but no such argument was found. These options are -f, -p, and -profile. Reissue the wsadmin command with a file name following the option. WASX7483E=WASX7483E: Application edit of {0} failed: see previous messages for details. An AdminApp edit command did not run. See previous messages for details. WASX7121E=WASX7121E: "{0}" found instead of expected '{'. {1} The wsadmin tool found the specified string when '{' was expected in the input stream. Correct and reissue the command. WASX7265W=WASX7265W: Stop not completed for server "{0}" on node "{1}". The stop process may have timed out. The specified server process cannot stop. The request has timed out. Verify that the server is stopped. WASX7482W=WASX7482W: The duplicate properties are specified. The latter property value will be set. The duplicate properties are specified in the command. The latter property value will be set to the property. Respecify the property name and value. ADMINCONFIG_HELP_HASCHANGES=WASX7126I: Method: hasChanges Arguments: none Description: Returns true if unsaved configuration changes exist This message is for informational purposes only. No action is required. WASX7373W=WASX7373W: Duplicate implementation class entry, {0}, found in {1} at line {2}. The same implementation class is included in the extension xml file more than once. Remove the duplicate implementation class from the extension xml file. WASX7120E=WASX7120E: Diagnostic information from exception with text "{0}" follows: {1} The wsadmin tool created an exception. Examine the exception information in the log file to determine the source of the problem. WASX7264I=WASX7264I: Stop completed for server "{0}" on node "{1}" The specified server is stopped on the specified node. No action is required. ADMINCONTROL_HELP_HELP=WASX7051I: Method: help Arguments: none Description: Displays general help for AdminControl. Method: help Arguments: command Description: Displays help for the AdminControl command specified by "command." This message is for informational purposes only. No action is required. INVALID_IPC_CONN_TYPE=WASX7024E: Error creating "{0}" connection to host "{1}"; ensure that the correct IPC host is specified in the wsadmin.properties file or with "-ipchost" on the command line; exception information: {2} The connector did not establish a connection to the host. Examine the accompanying exception information and the information in the wsadmin.traceout file to determine the cause of the error. WASX7263W=WASX7263W: Start not completed for server "{0}" on node "{1}". The server launching process may have timed out. The specified server process cannot start. The request has timed out. Verify that the server is started. WASX7372E=WASX7372E: Error instantiating the class for {0} provided in extension: {1} The system cannot instantiate the implementation class provided in the extension xml file. Examine the exception in the trace log and correct the problem accordingly. Verify that the class provides a constructor with no argument. ADMINCONFIG_HELP_HELP=WASX7339I: Method: help Arguments: none Description: Displays general help for AdminConfig. Method: help Arguments: method name Description: Displays help for the AdminConfig method specified by "method name." This message is for informational purposes only. No action is required. WASX7480E=WASX7480E: "{0}" found instead of expected '['. {1} The wsadmin tool found the specified string when '[' was expected in the input stream. Correct and reissue the command. HOST_REQUIRES_ARG=WASX7004E: The "-host" option requires a host name. The wsadmin launcher has been invoked with the -host option, but no host name argument was found. Specify a host name for the -host option and reissue the wsadmin command. WASX7371E=WASX7371E: Error locating the class for {0} provided in extension: {1} The system cannot find the implementation class provided in the extension xml file. Verify that the implementation class in the extension xml file is correct and that the class is in the class path. WASX7262I=WASX7262I: Start completed for server "{0}" on node "{1}" The specified server is started on the specified node. No action is required. HELP_HELP_ADMINAPP=WASX7276I: Method: AdminApp Arguments: none Description: Display general help information for the AdminApp object provided by wsadmin. This message is for informational purposes only. No action is required. WASX7298E=WASX7298E: Cannot invoke "{0}" command because this client is not connected to a Network Deployment Manager server. The AdminConfig command requires a connection to a deployment manager server. Connect to a deployment manager server or do not invoke this AdminConfig command. WASX7189I=WASX7189I: Validation level set to {0} An informational message issued in response to invoking the AdminConfig setValidationLevel. No action is required. JOB_ID_REQUIRES_ARG=WASX7445E: "-jobid" option must be followed by a jobID string. The wsadmin launcher did not run because no jobid argument was found for the -jobid option. Specify a value for the -jobid option and reissue the wsadmin command. ADMINAPP_HELP_DEPLOYEJB.DBTYPE=WASX7172I: "deployejb.dbtype" option; specifies the database type for EJBDeploy; valid values are {0}. This message is for informational purposes only. No action is required. ADMINCONFIG_HELP_REQUIRED=WASX7360I: Method: required Arguments: type Description: Displays the required attributes contained by an object of type "type". This message is for informational purposes only. No action is required. ADMINAPP_HELP_DEFAULTBINDING.CF.JNDI=WASX7163I: "defaultbinding.cf.jndi" option; specifies the JNDI name for the default connection factory This message is for informational purposes only. No action is required. WASX7370E=WASX7370E: Error registering bean {0} provided in extension: {1} The system cannot register the bean provider specified in the extension xml file with the BSF. Examine the exception in the trace log and correct the problem accordingly. CMSG0002. ADMINCONTROL_HELP_GETATTRIBUTE=WASX7043I: Method: getAttribute Arguments: object name, attribute Description: Returns value of "attribute" for the MBean described by "object name." This message is for informational purposes only. No action is required. ADMINAPP_HELP_REDEPLOY=WASX7333I: This option is deprecated. Use the "update" option instead. This message is for informational purposes only. No action is required. WASX7297E=WASX7297E: Cannot write to file "{0}" The AdminConfig extract command did not write document data to the specified file. Examine the wsadmin.traceout log file to determine the problem. Verify that there is enough space in the file system and that there are no file permission problems. WASX7188I=WASX7188I: Cross-document validation enablement set to {0} An informational message issued in response to invoking the AdminConfig setCrossDocumentValidationEnabled. No action is required. ADMINCONFIG_HELP_TYPES=WASX7068I: Method: types Arguments: none Description: Displays all the possible top-level configuration object types. Method: types Arguments: pattern Description: Displays all the possible top-level configuration object types matching with the wildcard "pattern". This message is for informational purposes only. No action is required. JACL_WELCOME_HELP=WASX7029I: For help, enter: "$Help help" This message is for informational purposes only. No action is required. WASX7079E=WASX7079E: Unable to determine attribute information for type "{0}" The wsadmin tool cannot process an attribute that has been specified on an AdminConfig command. This exception is unexpected. The cause is not immediately known. WASX7296E=WASX7296E: The name specified is not the name of a file "{0}" The AdminConfig extract command did not run because the specified filename describes an existing file system entity that is not a file. Verify that the specified name is not a directory name. Specify a valid file name and reissue the command. ADMINCONFIG_HELP_GETOBJECTNAME=WASX7204I: Method: getObjectName; Arguments: config id Description: Returns a string version of the ObjectName for the MBean that corresponds to this configuration ID. If there is no such running MBean this returns an empty string. This message is for informational purposes only. No action is required. MALFORMED_OBJECT_NAME=WASX7025E: Error found in String "{0}"; cannot create ObjectName. The wsadmin tool did not create the ObjectName object because a string was incorrectly formatted. Verify that the string is not empty and that it is correctly formatted for an ObjectName string. EXT_DIR_REQUIRES_ARG=WASX7489E: "-extdir" option must be followed by a path to set to ws.ext.dirs. The wsadmin launcher did not run because no argument was found for the -extdir option. Specify a path for the -extdir option and reissue the wsadmin command. WASX7187E=WASX7187E: Invalid value "{0}" -- possible valid values are "{1}" A value that has been specified for an AdminConfig command is not valid. Specify a valid value for the AdminConfig command. ADMINAPP_HELP_NODEPLOYWS=WASX7381I: "nodeployws" option; specifies to not deploy WebService during install; this is the default setting. This message is for informational purposes only. No action is required. ADMINCONTROL_HELP_GETMBEANCOUNT=WASX7037I: Method: getMBeanCount Arguments: none Description: Returns number of registered beans This message is for informational purposes only. No action is required. ADMINCONFIG_HELP_CREATEDOCUMENT=WASX7321I: Method: createDocument Arguments: documentURI, filename Description: Creates a new document in the configuration repository. The "documentURI" is the name of the document to be created in the repository which is relative to the root of the configuration repository such as "cells/MyCell/myfile.xml", and the "filename" is the name of the file to create which must be a valid local file name such as "c:/myfile". This message is for informational purposes only. No action is required. WASX7078E=WASX7078E: Missing config id: no id found in "{0}" The wsadmin tool did not recognize the configuration ID that has been specified for an AdminConfig command. No opening parenthesis was found. Specify a valid configuration ID using one of two forms: name(uri) or (uri). ADMINAPP_HELP_NOUSEAUTOLINK=WASX7478I: "nouseAutoLink" option; the EJB reference targets do not resolve automatically. The default setting is "nouseAutoLink" This message is for informational purpose only. No action is required. WASX7077E=WASX7077E: Incomplete config id: need closing parenthesis in "{0}" The wsadmin tool did not recognize the configuration ID that has been specified for an AdminConfig command. No closing parenthesis was found. Specify a valid configuration ID using one of two forms: name(uri) or (uri). GENERAL_HELP=WASX7001I: wsadmin is the executable for WebSphere scripting. Syntax: wsadmin [ -h(elp) ] [ -? ] [ -c <command> ] [ -p <properties_file_name>] [ -profile <profile_script_name>] [ -f <script_file_name>] [ -javaoption java_option] [ -lang language] [ -wsadmin_classpath class path] [ -profileName profile] [ -conntype SOAP [-host host_name] [-port port_number] [-user userid] [-password password] | RMI [-host host_name] [-port port_number] [-user userid] [-password password] | JSR160RMI [-host host_name] [-port port_number] [-user userid] [-password password] | IPC [-ipchost host_name] [-port port_number] [-user userid] [-password password] | NONE ] [ -jobid <jobid_string>] [ -tracefile <trace_file>] [ -appendtrace <true/false>] [ script parameters ] Where "command" is a command to be passed to the script processor; "properties_file_name" is a java properties file to be used; "profile_script_name" is a script file to be run before the main command or file; "script_file_name" is a command to be passed to the script processor; "java_option" is a java standard or non-standard option to be passed to the java program; "language" is the language to be used to interpret scripts; supported values are "jacl" and "jython". "classpath" is a class path to be appended to built-in one; "-conntype" specifies the type of connection to be used; the default argument is "SOAP" a conntype of "NONE" means that no server connection is made and certain operations will be performed in local mode; "host_name" is the host used for the SOAP or RMI connection; the default is the local host; "port_number" is the port used for the SOAP or RMI connection; "userid" is the userid required when the server is running in secure mode; "password" is the password required when the server is running in secure mode; "script parameters" is anything else on the command line. These are passed to the script in the argv variable; the number of parameters is available in the argc variable. "jobid_string" is a jobID string to be used to audit each invocation of wsadmin; "trace_file" is the log file name and location where wsadmin trace output is directed; If no command or script is specified, an interpreter shell is created for interactive use. To leave an interactive scripting session, use the "quit" or "exit" commands. Several commands, properties files, and profiles may be specified on a single command line. They are processed and run in order of their specification. This message is for informational purposes only. No action is required. ADMINCONTROL_HELP_GETDEFAULTDOMAIN=WASX7039I: Method: getDefaultDomain Arguments: none Description: returns "WebSphere" This message is for informational purposes only. No action is required. ADMINAPP_HELP_UPDATEACCESSIDS=WASX7245I: Method: updateAccessIDs Arguments: application name, boolean:bAll Description: Updates the application binding file for an installed application with access IDs for all the users and groups. Specifying true for bAll updates all the users/groups even if there are access IDs already present in the bindings. This message is for informational purposes only. No action is required. ADMINAPP_HELP_TARGET=WASX7449I: "target" option; specifies the target for AdminApp install functions. Example of target option value is WebSphere:cell=mycell,node=mynode,server=myserver This message is for informational purposes only. No action is required. CONN_REQUIRES_PORT=WASX7009E: The "{0}" connection type requires that a port be specified in a properties file or with "-port" on the command line. The wsadmin launcher cannot determine what port number should be used when a connector is created. Specify a -port option on the wsadmin command line or a com.ws.scripting.port property in the wsadmin.properties file. ADMINAPP_HELP_NODEPLOYEJB.PRECOMPILEJSPS=WASX7181I: "nodeployejb.preCompileJSPs" option; specifies that EJBDeploy should not pre-compile JSPs; this is the default setting. This message is for informational purposes only. No action is required. ADMINAPP_HELP_DEPLOYEJB.SQLJCLASSPATH=WASX7464I: "deployejb.sqljclasspath" option; specifies the SQLJ classpath for EJBDeploy This message is for informational purposes only. No action is required. ADMINAPP_HELP_WAS.INSTALL.ROOT=WASX7230I: "was.install.root" option; this option is obsolete This message is for informational purposes only. No action is required. ADMINAPP_HELP_HELP=WASX7062I: Method: help Arguments: none Description: Display general help for AdminApp. Method: help Arguments: method or option Description: Display help for the AdminApp method or option specified by String. This message is for informational purposes only. No action is required. ADMINAPP_HELP_BLANAME=WASX7477I: "blaname" option; use this option to specify the name of the business level application. This message is for informational purpose only. No action is required. JYTHON_WELCOME_HELP=WASX7031I: For help, enter: "print Help.help()" This message is for informational purposes only. No action is required. ADMINCONTROL_HELP_RECONNECT=WASX7034I: Method: reconnect Arguments: none Description: Reconnects with the server This message is for informational purposes only. No action is required. ADMINAPP_HELP_RAR.DESC=WASX7243I: "rar.desc" option; this option is a description of the J2CResourceAdapter. This message is for informational purposes only. No action is required. ADMINAPP_HELP_VIEW=WASX7404I: Method: view Arguments: name, taskname option Description: View the task specified by the "taskname option" parameter for the application or module specified by the "name" parameter. Use "-tasknames" as the option to get a list of valid task names for the application. Otherwise, specify one or more task names as the option. Method: view Arguments: name Description: View the application or module specified by the "name" parameter. This message is for informational purposes only. No action is required. ADMINCONFIG_HELP_CONVERTTOCLUSTER=WASX7293I: Method: convertToCluster Arguments: server id, cluster name Description: Creates a new ServerCluster object with the name specified by "cluster name," and makes the server specified by "server id" the first member of this cluster. Applications loaded on this server are now configured on the new cluster. This message is for informational purposes only. No action is required. DASH_CONNTYPE_NEEDS_FOLLOWING_CONN=WASX7007E: "-conntype" option must be followed by connection type information. The wsadmin launcher has been invoked with the -conntype option, but no connection type argument was found. Specify a connection type for the -conntype option and reissue the wsadmin command. For example, the SOAP, RMI, or NONE connection types are valid values for the -conntype option. ADMINCONTROL_HELP_GETATTRIBUTE_JMX=WASX7288I: Method: getAttribute_jmx Arguments: object name (type ObjectName), attribute (String) Description: Returns value of "attribute" for the MBean described by "object name." This message is for informational purposes only. No action is required. ADMINAPP_HELP_NODISTRIBUTEAPP=WASX7183I: "nodistributeApp" option; specifies that the application management component should not distribute application binaries. The default setting is "distributeApp" This message is for informational purposes only. No action is required. ADMINAPP_HELP_OPTIONS=WASX7098I: Method: options Arguments: none Description: Displays the general options available for every application to be installed. Method: options Arguments: filename Description: Displays all the options available for installing the application in the file specified by "filename". Method: options Arguments: appname Description: Displays all the options available for editing the application specified by "appname". Method: options Arguments: modulename Description: Displays all the options available for editing the application module specified by "modulename". Method: options Arguments: filename, operation Description: Displays all the options available for the file specified by "filename" using the specified operation. Valid operations are "installapp", "updateapp", "addmodule", and "updatemodule". This message is for informational purposes only. No action is required. WASX7309W=WASX7309W: No "save" was performed before the script "{0}" exited; configuration changes will not be saved. The changes invoked by a script concluded were not saved. No configuration changes were saved. Verify that the script uses the AdminConfig save command. WASX7418E=WASX7418E: Application update for {0} failed: see previous messages for details. The wsadmin tool did not run the AdminApp update command. No action is required. ADMINCONTROL_HELP_GETPORT=WASX7033I: Method: getPort Arguments: none Description: Returns the port used for scripting connection. This message is for informational purposes only. No action is required. ADMINAPP_HELP_CREATEMBEANSFORRESOURCES=WASX7424I: "createMBeansForResources" option: this option specifies that MBeans are created for all the resources such as servlets, jsps, EJBs, defined in an application when the application is started on a deployment target; the default is nocreateMBeansForResources. This message is for informational purposes only. No action is required. WASX7417E=WASX7417E: {0} option is required when {1} content type and {2} operation are specified. The missing option is a required option if the specified content type and operation are provided in the update command. Specify the missing option and reissue the update command. WASX7416E=WASX7416E: {0} option is required when {1} content type is specified. The missing option is required when the specified content type is provided in the update command. Specify the missing option and reissue the update command. EXCEPTION_RUNNING_COMMAND=WASX7015E: Exception running command: "{0}"; exception information: {1} The wsadmin tool cannot run interactive mode for the specified command. Examine the accompanying exception information to determine the appropriate action. HELP_HELP_HELP=WASX7267I: Method: help Arguments: none Description: Display general help for Help. Method: help Arguments: method Description: Display help for the Help method specified by String. This message is for informational purposes only. No action is required. ADMINCONTROL_HELP_GETATTRIBUTES_JMX=WASX7289I: Method: getAttributes_jmx Arguments: object name (type ObjectName), attributes (String[]) Description: Returns an AttributeList object containing the values of the attributes named in "attributes" for the object named by "object name." This message is for informational purposes only. No action is required. WASX7307E=WASX7307E: Cannot create object of type "{0}" on a Network Deployment Manager node. The AdminConfig create command cannot create this type of object. Modify the create command. WASX7415W=WASX7415W: Ignoring {0} option when {1} operation is specified. The option specified in the message is not required if the specified operation is provided in the update command. No action is required. USER_REQUIRES_ARG=WASX7249E: The "-user" option requires a user name. The wsadmin launcher has been invoked with the -user option, but no user name argument was found. Specify a user name for the -user option and reissue the wsadmin command. WASX7306E=WASX7306E: Cannot complete testConnection function because the node for Data Source "{0}" cannot be determined. The wsadmin tool cannot determine the node for the specified DataSource that was specified by the AdminControl testConnection command. Verify that the DataSource is correctly configured. WASX7414W=WASX7414W: Ignoring {0} option when {1} content type is specified. The option specified in this message is not required if the specified content type is provided in the update command. No action is required. ADMINCONFIG_HELP_GETID=WASX7085I: Method: getid Arguments: containment path Description: Returns the configuration ID for an object described by the given containment path -- for example, /Node:myNode/Server:s1/JDBCProvider:jdbc1/ This message is for informational purposes only. No action is required. LANGUAGE_NOT_SUPPORTED=WASX7379E: Language "{0}" is not supported. Supported languages are jacl and jython. An unsupported scripting language was specified. Specify a supported scripting language with the -lang option or com.ibm.ws.scripting.defaultLang option. WASX7305I=WASX7305I: Client is connected to a server of type "{0}". The server "{1}" will be started on node "{2}" without attempting to synchronize the configuration. The wsadmin tool cannot synchronize the configuration before startup because a node agent process is starting. No action is required. WSCP_EXC_OPENING_BRACE=WSCP0140E: "{0}" found instead of expected '{' There is a syntax error in a string provided in an attribute list Correct the attribute list syntax. WASX7413E=WASX7413E: Invalid operation value: {0} The value for the operation option is not valid. Valid values for this parameter are app, file, modulefile, and partialapp. Reissue the update command with the correct operation value. ADMINCONFIG_HELP_RESETATTRIBUTES=WASX7472I: Method: resetAttributes Arguments: config id, attributes Description: Use the resetAttributes command to reset the specific attributes for a configuration object. This message is for informational purposes only. No action is required. ADMINCONTROL_HELP_GETCONFIGID=WASX7059I: Method: getConfigId Arguments: object name Description: Returns a configuration ID for the configuration object that corresponds to the MBean named by "object name." This function communicates with the configuration service to look up a configuration ID that can be used by AdminConfig. If no configuration object exists that corresponds to the supplied object name string, getConfigId returns an empty string. The object name string supplied as input to this function may be a wildcard -- for example: "type=Server,*" In this case, getConfigId returns the configuration ID of the first matching object found. Message WASX7026W is also displayed as a warning. This message is for informational purposes only. No action is required. JAVASCRIPT_WELCOME_HELP=WASX7030I: For help, enter: "Help.help()" This message is for informational purposes only. No action is required. WASX7412E=WASX7412E: Invalid content type value: {0} The value for the content type parameter is not valid. Valid values for this parameter are add, addupdate, delete, and update. Reissue the update command with the correct content type value. ADMINAPP_HELP_DEFAULTBINDING.DATASOURCE.JNDI=WASX7160I: "defaultbinding.datasource.jndi" option; specifies the JNDI name for the default datasource This message is for informational purposes only. No action is required. WASX7303I=WASX7303I: The following options are passed to the scripting environment and are available as arguments that are stored in the argv variable: "{0}" The wsadmin tool did not recognize some arguments as command line parameters. The wsadmin tool stores these arguments in the argv variable and are available to the script. The argc variable contains the number of arguments available in the argv variable. Verify that the unrecognized arguments are arguments for scripts or commands to use. Correct or delete unrecognized options if necessary. WASX7411W=WASX7411W: Ignoring the following provided option: {0} The wsadmin tool cannot recognize some options specified in the AdminApp command. Verify that options provided in the message are correct. Reissue the AdminApp command if necessary. Otherwise, no action is required. ADMINAPP_HELP_DEFAULTBINDING.VIRTUAL_HOST=WASX7166I: "defaultbinding.virtual.host" option; specifies the default virtual host name. This message is for informational purposes only. No action is required. HELP_HELP_ATTRIBUTES=WASX7268I: Method: attributes Arguments: MBean Description: Display information about the attributes of the specified MBean. Method: attributes Arguments: MBean, attribute name Description: Display information about the specified attribute on the specified MBean. This message is for informational purposes only. No action is required. WASX8019E=WASX8019E: Incorrect number of key fields specified for step {0}: {1} The option values provided to the specified step are not complete. Specify the correct number of key fields for the step and reissue the AdminTask command. WASX7302E=WASX7302E: Cannot get tasks using file {0}. Ensure that this file exists and is readable. The AdminApp options command did not obtain task options from the specified ear file. Verify that this file exists and is readable. ADMINAPP_HELP_UPDATE.IGNORE.OLD=WASX7367I: "update.ignore.old" option; this option specifies that when an application is updated, the bindings from the old version are ignored during the reinstall operation. This option only has meaning if the "update" option is specified; otherwise it is ignored. This message is for informational purposes only. No action is required. WASX7338E=WASX7338E: Caught exception stopping server "{0}." Exception information: {1} The AdminControl stopServer command did not run. Examine the wsadmin.traceout file and the server log files to determine the source of the problem. ADMINAPP_HELP_TASKINFO=WASX7099I: Method: taskInfo Arguments: filename, taskname Description: Runs default bindings for the application specified by "filename" and displays detailed information about the install task specified by "taskname" This message is for informational purposes only. No action is required. ADMINCONFIG_HELP_GETVALIDATIONSEVERITYRESULT=WASX7300I: Method: getValidationSeverityResult Arguments: severity Description: Returns the number of validation messages with the given severity from the most recent validation. This message is for informational purposes only. No action is required. WASX8018E=WASX8018E: Cannot find a match for option value {0} for step {1} The option values for the specified step do not match the existing data. Specify the correct option values for the step and reissue the AdminTask command. WASX7337I=WASX7337I: Invoked stop for server "{0}" on node "{1}"; Waiting for stop completion. A request has been made to stop the specified server process. The scripting process will wait until the stop is complete or the action times out. In the first case, WASX7264I should be issued; in the second case, WASX7265W should be issued. No action is required. WASX7301E=WASX7301E: Cannot get the task info for {0} using file {1}. Ensure that this file exists and is readable. The AdminApp taskInfo command did not obtain task information from the specified ear file. Verify that the file exists and is readable, and that the task name is spelled correctly. ADMINAPP_HELP_EXPORTTOLOCAL=WASX7473I: "exportToLocal" option; specifies the option for AdminApp export function to export application to the client local machine. This message is for informational purposes only. No action is required. WASX8017E=WASX8017E: Command provider error: step {0} does not contain any key The AdminTask command contains an internal error. Retry with scripting trace on and take a look wsadmin.traceout. CMSG0002. ADMINAPP_HELP_VALIDATEAPP=WASX7225I: "validateApp" option; this option is obsolete This message is for informational purposes only. No action is required. WASX7119E=WASX7119E: Invalid option "{0}." Valid options are "overwriteOnConflict," and "rollbackOnConflict." The mode that has been specified with the AdminConfig setSaveMode command is not valid. Specify a valid save mode. The valid options are "overwriteOnConflict" and "rollbackOnConflict". WASX7227W=WASX7227W: Profile {0} is in the wrong language and will not be executed; language used is {1} The wsadmin tool cannot run the profile that has been specified is not in the same scripting language as the scripting session. Remove the profile from the wsadmin.properties file or the wsadmin command line options. ADMINCONTROL_HELP_COMPLETEOBJECTNAME=WASX7049I: Method: completeObjectName Arguments: object name, template Description: Returns a String version of an object name that matches the "template." For example, the template might be "type=Server,*" If there are several MBeans that match the template, the first match is returned. This message is for informational purposes only. No action is required. WASX7336E=WASX7336E: The "{0}" option is required if "{1}" is specified. A required option is missing for the AdminApp install command. Specify each required option and reinvoke the command. ADMINCONTROL_HELP_GETTYPE=WASX7052I: Method: getType Arguments: none Description: Returns connection type used for scripting connection. This message is for informational purposes only. No action is required. WASX8016E=WASX8016E: Command provider error: null object type The AdminTask command contains an internal error. Retry with scripting trace on and take a look wsadmin.traceout. CMSG0002. WASX7118I=WASX7118I: Changes have been made to the configuration, but these changes have not been saved. Enter "quit" or "exit" if you want to terminate this session without saving your changes. To save the changes, invoke the "save" command on the AdminConfig object. The user requested to terminate an interactive scripting session, but configuration changes have not yet been saved. Commit the unsaved changes. To exit the scripting session without saving your changes, respond with "quit" or "exit." Any other response keeps the session active. Use the AdminConfig save command to commit any unsaved changes. WASX7444E=WASX7444E: Invalid parameter value "{0}" for parameter "{1}" on command "{2}" A parameter value is not valid. Do not specify parameter values as null or empty strings. Reissue the AdminConfig command with the correct parameter value. ADMINAPP_HELP_DEPLOYEJB.RMIC=WASX7175I: "deployejb.rmic" option; specifies extra RMIC options to be used for EJBDeploy This message is for informational purposes only. No action is required. ADMINAPP_HELP_NOALLOWDISPATCHREMOTEINCLUDE=WASX7454I: "noallowDispatchRemoteInclude" option; Disables an enterprise application to dispatch includes to resources across web modules in different JVMs in a managed node environment via the standard RequestDispatcher mechanism. This message is for informational purposes only. No action is required. HELP_HELP_CLASSNAME=WASX7273I: Method: classname Arguments: MBean Description: Display information about the classname of the specified MBean. This message is for informational purposes only. No action is required. WASX8015E=WASX8015E: Invalid option value for step {0}: {1} Option value provided to the specified step is not valid. Reissue the AdminTask command with the correct option value for step. WASX7443I=WASX7443I: Server "{0}" on node "{1}" is not being monitored. Please verify that the server has stopped before continuing. The wsadmin tool issued a request to stop the specified server process. The scripting process will not wait until the request succeeds. Verify that the server stopped before continuing. ADMINAPP_HELP_NOPROCESSEMBEDDEDCONFIG=WASX7438I: "noprocessEmbeddedConfig" option; Use this option to ignore the embedded configuration data that is included in the application. The default setting is "processEmbeddedConfig". This message is for informational purposes only. No user action is required. ADMINAPP_HELP_OPERATION=WASX7423I: "operation" option: this option is used in the update or updateInteractive command to specify the operation to be performed. Valid values are add - adds new content addupdate - performs add or update based on existence of contents in the application delete - deletes contents update - update existing contents This option is required if content type is file or modulefile. This option must have "update" as the value if content type is app. This option is ignored for other content type values. This message is for informational purposes only. No action is required. WASX8014E=WASX8014E: Step {0} is not a table. More than one set of data values was specified for the step and is not a table. Provide one set of data values to the step indicated in this error message and reissue the AdminTask command. WASX7442E=WASX7442E: "{0}" action not supported when node name is not provided. Specify the node name as one of the arguments. Include the node name for the server in your arguments. WASX7116E=WASX7116E: Cannot copy file "{0}" to file "{1}" The wsadmin tool cannot copy the ear file to a temporary location for AdminApp processing. Examine the wsadmin.traceout log file to determine the problem. Verify that there is enough space in the file system and that there are no file permission problems. ADMINAPP_HELP_NODEPLOYEJB=WASX7170I: "nodeployejb" option; specifies that EJBDeploy should not be run during install; this is the default setting. This message is for informational purposes only. No action is required. ADMINAPP_HELP_CLUSTER=WASX7330I: "cluster" option; specifies the cluster name for AdminApp install functions. This message is for informational purposes only. No action is required. WASX8013I=WASX8013I: Detailed help for step: {0} Description: {1} Collection: {2} Arguments: {3} This message is for informational purposes only. No action is required. ADMINCONFIG_GENERAL_HELP=WASX7053I: The AdminConfig object communicates with the Config Service in a WebSphere server to manipulate configuration data for a WebSphere installation. AdminConfig has commands to list, create, remove, display, and modify configuration data, as well as commands to display information about configuration data types. Most of the commands supported by AdminConfig operate in two modes: the default mode is one in which AdminConfig communicates with the WebSphere server to accomplish its tasks. A local mode is also possible, in which no server communication takes place. The local mode of operation is invoked by bringing up the scripting client with no server connected using the command line "-conntype NONE" option or setting the "com.ibm.ws.scripting.connectionType=NONE" property in the wsadmin.properties. The following commands are supported by AdminConfig; more detailed information about each of these commands is available by using the "help" command of AdminConfig and supplying the name of the command as an argument. attributes Shows the attributes for a given type checkin Checks a file into the configuration repository convertToCluster Converts a server to be the first member of a new ServerCluster create Creates a configuration object, given a type, a parent, and a list of attributes, and optionally an attribute name for the new object createClusterMember Creates a new server that is a member of an existing cluster createDocument Creates a new document in the configuration repository createUsingTemplate Creates an object using a particular template type defaults Displays the default values for attributes of a given type deleteDocument Deletes a document from the configuration repository existsDocument Tests for the existence of a document in the configuration repository extract Extracts a file from the configuration repository getCrossDocumentValidationEnabled Returns true if cross-document validation is enabled getid Shows the configuration ID of an object, given a string version of its containment getObjectName Given a configuration ID, returns a string version of the ObjectName for the corresponding running MBean, if any getObjectType Given a configuration ID, returns a string version of the object type getSaveMode Returns the mode used when "save" is invoked getValidationLevel Returns the validation used when files are extracted from the repository. getValidationSeverityResult Returns the number of messages of a given severity from the most recent validation hasChanges Returns true if unsaved configuration changes exist help Shows help information installResourceAdapter Installs a J2C resource adapter with the given rar file name and an option string in the node list Lists all configuration objects of a given type listTemplates Lists all available configuration templates of a given type modify Changes specified attributes of a given configuration object parents Shows the objects which contain a given type queryChanges Returns a list of unsaved files remove Removes the specified configuration object required Displays the required attributes of a given type. reset Discards unsaved configuration changes resetAttributes Resets value of the specified attributes. save Commits unsaved changes to the configuration repository setCrossDocumentValidationEnabled Sets the cross-document validation enabled mode. setSaveMode Changes the mode used when "save" is invoked setValidationLevel Sets the validation used when files are extracted from the repository. show Shows the attributes of a given configuration object showall Recursively shows the attributes of a given configuration object, and all the objects contained within each attribute. showAttribute Displays only the value for the single attribute specified. types Shows the possible types for configuration uninstallResourceAdapter Uninstalls a J2C resource adapter with the given resource adapter configuration ID. unsetAttributes Unsets value of the specified attributes. validate Invokes validation This message is for informational purposes only. No action is required. WASX7441E=WASX7441E: "{0}" action not supported when process type of server being stopped is "{1}" Use the terminate flag only to stop servers of the managed process type. Verify that the server to stop is a managed process. WASX7115E=WASX7115E: Cannot read input file "{0}" The wsadmin tool cannot read the ear file when preparing to copy it to a temporary location for AdminApp processing. Examine the wsadmin.traceout log file to determine the problem. Verify that the file path is correct and that there are no file permission problems. WASX8012E=WASX8012E: Step {0} is not enabled. The wsadmin tool cannot modify the data in the specified step. It is not enabled for the task. Reissue the AdminTask command without the step option indicated in this error message. WASX7114E=WASX7114E: Cannot create temporary file in directory "{0}" The wsadmin tool cannot copy the ear file to a temporary location for AdminApp processing. Examine the wsadmin.traceout log file to determine the problem. Verify that there is enough space in the file system, and that there are no file permission problems. WASX7331I=WASX7331I: Unexpected exception received when querying for changes in this session: {0} The wsadmin tool created an exception because it could not determine if configuration changes have been made during the session. The connection to the server process might have broken before the scripting session was stopped. No action is required. WASX8011W=WASX8011W: AdminTask object is not available. The wsadmin tool cannot connect to a server. Reissue the wsadmin command to create a server connection. ADMINCONFIG_HELP_GETCROSSDOCUMENTVALIDATIONENABLED=WASX7203I: Method: getCrossDocumentValidationEnabled Arguments: none Description: Returns a message giving the current cross-document enablement setting. This message is for informational purposes only. No action is required. WASX7475E=WASX7475E: The {0} output file already exists. Specify another output file name. A file, which has the same name as the specified output file name in exportFile command, exists in the local directory. Rerun the exportFile command and specify a non-existent output file name. WASX7113E=WASX7113E: Task "{0}" not valid; valid tasks are "{1}" The task name is not valid for the AdminApp taskInfo command that has been invoked. Specify a valid task name as described in the WAS7113E message output. ADMINAPP_HELP_EDITINTERACTIVE=WASX7103I: Method: editInteractive Arguments: application name, options Description: Edits the application specified by "application name" using the options specified by "options". The user is prompted for information about each relevant task. Method: editInteractive Arguments: application name Description: Edits the application specified by "application name." The user is prompted for information about each relevant task. This message is for informational purposes only. No action is required. WASX7257E=WASX7257E: Cannot locate NodeAgent object on node "{0}". Unable to start server "{1}" on that node. The AdminControl startServer command did not run because the NodeAgent on the server's node is not running. Start the NodeAgent on the appropriate machine. WASX8010E=WASX8010E: Invalid scripting language: {0} The specified language is not supported. Specify a supported scripting language. ADMINCONFIG_HELP_EXTRACT=WASX7294I: Method: extract Arguments: documentURI, filename Description: Extracts a configuration repository document that is described by the "documentURI" and places it in the file named by the "filename". The "documentURI" describes a document that must exist in the repository and is relative to the root of repository such as "cells/MyCell/myfile.xml", and the "filename" must be a valid local file name to extract the document to such as "c:/myfile". This method returns an opaque "digest" object which should be used to check the file back in the repository using the checkin command. This message is for informational purposes only. No action is required. ADMINCONTROL_HELP_STOPSERVER=WASX7259I: Method: stopServer Arguments: server name Description: Stops a server. Method: stopServer Arguments: server name, immediate flag Description: Stops a server. If the "immediate flag" is set to "immediate" then a stopImmediate is performed for the specified server. Otherwise, a normal stop is performed. Method: stopServer Arguments: server name, node name Description: Stops a server in the specified node. Method: stopServer Arguments: server name, node name, immediate flag Description: Stops a server in the specified node. If the "immediate flag" is set to "immediate" then a stopImmediate is performed for the specified server. Otherwise, a normal stop is performed. Method: stopServer Arguments: server name, node name, terminate flag Description: Stops a server on the specified node. If the "terminate flag" is set to "terminate" then a terminate is performed for the specified server. Otherwise, a normal stop is performed. This operation can only be performed on a Managed Process. The node name is a required argument. This message is for informational purposes only. No action is required. WASX7112I=WASX7112I: The following options are valid for "{0}" This informational message displays in response to an AdminApp options command. No action is required. WASX7256W=WASX7256W: Cannot locate NodeSync object on node "{0}". Unable to synchronize configurations before starting server "{1}" The AdminControl startServer invocation did not run because the wsadmin tool cannot locate the NodeSync object on the specified node. Examine the logs on the node if the NodeSync object is not running. WASX7365I=WASX7365I: Explanation: {0} User action: {1} This message is for informational purposes only. No action is required. ADMINAPP_HELP_APPNAME=WASX7232I: "appname" option; use this option to specify the name of the application. The default is to use the display name of the application. This message is for informational purposes only. No action is required. WASX7220E=WASX7220E: This operation was invoked with the "-local" option, but the scripting client is connected to process "{0}" on node "{1}." Local operations can not be performed when a connection exists to a server. You can either re-run the command without the "-local" option, or invoke the scripting client without servers running. The "-local" option is not permitted for AdminApp functions when the scripting client is connected to a server. Remove the "-local" option, or use the "-conntype NONE" option to avoid connecting to a server. ADMINAPP_HELP_DEFAULTBINDING.EJBJNDI.PREFIX=WASX7165I: "defaultbinding.ejbjndi.prefix" option; specifies the prefix for the JNDI name of EJBs. This message is for informational purposes only. No action is required. ADMINAPP_HELP_LISTMODULES=WASX7205I: Method: listModules Arguments: application name, options Description: List the modules in the application specified by "application name using the options specified by "options". The valid option is "-server". If "-server" is specified, then the return value will include the server information on each module. Method: listModules Arguments: application name Description: List the modules in the application specified by "application name". This message is for informational purposes only. No action is required. WASX7111E=WASX7111E: Cannot find a match for supplied option: "{0}" for task "{1}". The supplied option must match with the existing task data in the application and the existing task data are: "{2}" =The data is not valid for an AdminApp install command for the specified task. The task consists of some number of items, some of which cannot be changed. The unchangeable items are a key for the data must exactly match the information included in an install command for this task. Invoke the AdminApp taskInfo command for this file and task name to determine what information is needed for the task. ADMINCONFIG_HELP_GETOBJECTTYPE=WASX7466I: Method: getObjectType Arguments: config id Description: Displays the configuration object type by "config id." This message is for informational purposes only. No action is required. ADMINAPP_HELP_NOPRECOMPILEJSPS=WASX7224I: "nopreCompileJSPs" option; use this option to specify that JSPs are not to be precompiled. This is the default. This message is for informational purposes only. No action is required. ADMINCONFIG_HELP_UNSETATTRIBUTES=WASX7471I: Method: unsetAttributes Arguments: config id, attributes Description: Use the unsetAttributes command to reset the specific attributes for a configuration object to the default values. This message is for informational purposes only. No action is required. WASX7364E=WASX7364E: Error getting help information for message id {0}. The directory containing the help information does not exist. This exception is unexpected. The cause is not immediately known. ADMINAPP_HELP_DEPLOYEJB=WASX7169I: "deployejb" option; specifies that EJBDeploy should be run during install; the default is "nodeployejb" This message is for informational purposes only. No action is required. WASX7255E=WASX7255E: Cannot find server "{0}" in configuration data. The AdminControl startServer command did not run because the server that has been specified does not exist. Verify that the server name is spelled correctly. ADMINCONFIG_HELP_SETCROSSDOCUMENTVALIDATIONENABLED=WASX7202I: Method: setCrossDocumentValidationEnabled Arguments: flag Description: Sets the cross-document validation enabled flag to true or false. This message is for informational purposes only. No action is required. ADMINCONTROL_HELP_ISREGISTERED_JMX=WASX7287I: Method: isRegistered_jmx Arguments: object name (type ObjectName) Description: Returns true if supplied "object name" is registered. This message is for informational purposes only. No action is required. WASX7146I=WASX7146I: The following configuration files contain unsaved changes: {0} The wsadmin tool displays this informational message in response to the AdminConfig queryChanges command. The command lists the files that have been updated by the scripting client since the last save or reset command. No action is required. WASX7110E=WASX7110E: Incorrect number of elements in option: "{0}" for task: "{1};" number of elements should be {2}. The data is not valid for an AdminApp install command for the specified task. The task consists of some number of items, but a different number has been supplied. Invoke the AdminApp taskInfo command for this file and task name to determine what information is needed for the task. ADMINCONFIG_HELP_CREATECLUSTERMEMBER=WASX7284I: Method: createClusterMember Arguments: cluster id, node id, member attributes Description: Creates a new Server object on the node specified by "node id." This Server is created as a new member of the existing cluster specified by "cluster id," and has attributes specified in "member attributes." One attribute is required: "memberName." The Server is created using the default template for Server objects, and has the name and specified by the "memberName" attribute. Method: createClusterMember Arguments: cluster id, node id, member attributes, template id Description: Creates a new Server object on the node specified by "node id." This Server is created as a new member of the existing cluster specified by "cluster id," and has attributes specified in "member attributes." One attribute is required: "memberName." The Server is created using the Server template specified by "template id," and has the name specified by the "memberName" attribute. This message is for informational purposes only. No action is required. SECURITY_NONFIPS_PROVIDER=WASX7402W: "Use FIPS" is enabled, but the SSL provider is not IBMJSSEFIPS. FIPS approved cryptographic algorithms may not be used. You cannot use FIPS approved cryptographic algorithms if SSL provider is not IBMJSSEFIPS. Examine the exception in the trace log and correct the problem accordingly. WASX7363E=WASX7363E: No help available for message id {0}. The Help message command cannot locate any message information for the specified message id. Verify that the specified message id is correct. WASX7399E=WASX7399E: List of J2CResourceAdapter objects still using the specified Resource Adapter: J2CResourceAdapter objects currently use the resource adapter specified in the uninstallResourceAdapter command. Uninstall the resource adapters listed in this error message before attempting to uninstall the specified resource adapter. To force this uninstall action without uninstalling the other resource adapters first, use the -force option with uninstallResourceAdapter command. WASX7254E=WASX7254E: "{0}" action not supported when process type is "{1}" The wsadmin tool is connected to the wrong type of process. Verify that the wsadmin tool is connected to the correct process. EXCEPTION_LOADING_PROPERTIES_FILE=WASX7012E: Exception received while loading properties file {0}; exception information: "{1}" During wsadmin initialization, a properties file could not be loaded. Examine the wsadmin.traceout log file to determine the problem. Verify that there is enough space in the file system and that there are no file permission problems. CANNOT_FIND_LANG_FOR_COMMANDS=WASX7021E: Cannot determine scripting language for command invocation -- please specify "-lang" option on the command line. The wsadmin tool cannot determine which scripting language to use with the -c option. Specify a supported scripting language with the -lang option on the wsadmin command line, or com.ibm.ws.scripting.defaultLang property in the wsadmin.properties file. WASX7398E=WASX7398E: List of applications still using the specified Resource Adapter: Applications currently use the resource adapter specified in the uninstallResourceAdapter command. Uninstall the applications listed in this error message before uninstalling the resource adapter. To force this uninstall action without uninstalling applications first, specify the -force option with uninstallResourceAdapter command. ADMINAPP_HELP_REMOTEDIR=WASX7236I: "remotedir" option; this option is obsolete This message is for informational purposes only. No action is required. WASX7470E=WASX7470E: One or more attributes name must be specified for unsetAttributes; received: {0} The attribute name will be unset is not specified. Supply the attribute name to be unset. ADMINCONFIG_HELP_SHOW=WASX7057I: Method: show Arguments: config id Description: Displays all the attributes for the configuration object named by "config id." Method: show Arguments: config id, attribute list Description: Displays the attributes specified in "attribute list" for the configuration object named by "config id." This message is for informational purposes only. No action is required. WASX7361I=WASX7361I: No required attribute found for type "{0}". No required attributes were found for the specified type. No action is required. WASX7397I=WASX7397I: The following J2CResourceAdapter objects are removed: {0} This message is for informational purposes only. No action is required. WASX7252E=WASX7252E: Unable to locate running server "{0}" on node "{1}". The AdminControl stopServer command did not run because a running server of the specified name was not found. Verify that the server name is spelled correctly. WASX7143E=WASX7143E: The object with id "{0}" does not exist. The wsadmin tool did not process the AdminConfig command because a configuration ID that has been specified does not correspond to an existing configuration object. Verify that the id is spelled correctly. ADMINAPP_HELP_CONTEXTROOT=WASX7234I: "contextroot" option; use this option to specify the context root to be used when installing a stand-alone war file. This message is for informational purposes only. No action is required. CONFIG_NOT_AVAILABLE=WASX7070E: The configuration service is not available. The AdminConfig command did not start because the wsadmin process is not connected to a server with a running config service. Specify a server with a running configuration services and reissue the wsadmin command. ADMINCONFIG_HELP_DELETEDOCUMENT=WASX7322I: Method: deleteDocument Arguments: documentURI Description: Deletes a document from the configuration repository. The "documentURI" is the name of the document to be deleted from the repository which is relative to the root of configuration repository such as "cells/MyCell/myfile.xml". This message is for informational purposes only. No action is required. PASSWORD_REQUIRES_ARG=WASX7250E: The "-password" option requires a password. The wsadmin launcher has been invoked with the -password option, but no password argument was found. Specify a password for the -password option and reissue the wsadmin command. WASX7395E=WASX7395E: The specified values for -lang and -internalLang options are not the same. Use one or the other option but not both. The -lang and -internalLang options are specified. However, the values for the two options are not the same. Specify either the -lang or -internalLang option. ADMINAPP_HELP_UPDATE=WASX7419I: Method: update Arguments: application name, content type, options Description: updates the application specified by "application name" using update type specified by "content type" with options specified by "options". Valid update content type values are app - entire application file - a single file modulefile - a module partialapp - partial application All valid options for install command are valid for the update command. Additional update options are -operation - operation to be performed. Valid values are add - adds new contents addupdate - performs add or updates based on existence of contents in the application delete - deletes contents update - update existing contents This option is required if content type is file and modulefile. This option must have "update" as the value if content type is app. This option is ignored if content type is partialapp. -contents - file containing the contents to be added or updated. The specified file has to be local to the scripting client. This option is required except for delete operation. -contenturi - URI of the file to be added, updated, or removed from the application. This option is required if content type is file or modulefile. This option is ignored if content type is app or partialapp. The AdminApp "options" command may be used to get a list of all possible options for a given ear file. The AdminApp "help" command may be used to get more information about each particular option. This message is for informational purposes only. No action is required. ADMINCONTROL_HELP_TRACE=WASX7050I: Method: trace Arguments: trace specification Description: Turns on the trace specified by "trace specification" in the scripting process. This message is for informational purposes only. No action is required. WASX7141E=WASX7141E: Incorrect trace string supplied: "{0}" The trace string that has been specified for an AdminControl trace command is not valid. Verify that the trace string is spelled correctly. HELP_HELP_ADMINCONFIG=WASX7275I: Method: AdminConfig Arguments: none Description: Display general help information for the AdminConfig object provided by wsadmin. This message is for informational purposes only. No action is required. ADMINCONTROL_HELP_QUERYMBEANS=WASX7456I: Method: queryMBeans Arguments: object name Description: Returns a Set containing ObjectInstances object that match the input object name. Method: queryMBeans Arguments: object name (type ObjectName), query (type QueryExp) Description: Returns a Set containing ObjectInstances object that match the input object name and query. This message is for informational purposes only. No action is required. NO_CONN_TYPE=WASX7019E: No connection type specified; use "-conntype" on the command line. The wsadmin tool requires connection type information. Specify the connection type with the -conntype command line option or the com.ibm.ws.scripting.connectionType property in wsadmin.properties. Specify a valid connection type with the -conntype command line option or the com.ibm.ws.scripting.connectionType property in wsadmin.properties. WASX7140E=WASX7140E: Length mismatch: {0} parameters were specified, but {1} signatures were supplied. The same number must be specified for both. A different number of parameters and signature elements have been specified for an AdminControl invoke command. There must be exactly one signature element for every parameter. Specify exactly one signature element for every parameter and reissue the invoke command. Alternatively, reissue the command with no signature elements. ADMINAPP_HELP_DEFAULTBINDING.DATASOURCE.PASSWORD=WASX7162I: "defaultbinding.datasource.password" option; specifies the password for the default datasource This message is for informational purposes only. No action is required. WASX7380=WASX7380I: Invalid file name specified: {0}. File name must end with the following file extensions: ear, jar, rar, or war This message is for informational purposes only. No action is required. ADMINAPP_HELP_DEPLOYEJB.DBSCHEMA=WASX7173I: "deployejb.dbschema" option; specifies the database schema for EJBDeploy This message is for informational purposes only. No action is required. WASX7392W=WASX7392W: Your application contains policy permissions that are in the filter policy. These permissions are security sensitive and can compromise the integrity of the system. Continuing with the application deployment process ... The application server attempts to prevent applications from performing security-sensitive operations such as: calling the System.exit() method, replacing the java 2 Security manager, and replacing the java 2 Security policy. If the application is granted the all permission (java.security.AllPermission), the java 2 Security permission checks are disabled. This compromises the integrity of the system. Review the application policy that is located in the EAR/META-INF/was.policy file. Remove the security-sensitive permissions and grant the application only the permissions that are required. WASX7283E=WASX7283E: This command requires an object of type "{0}", but the specified object "{1}" has type: "{2}" An AdminConfig command did not run because a required object must be a specific type. Specify an object of the correct type and reinvoke the command. WASX7391W=WASX7391W: Your application contains policy permissions that are in the filter policy. These permissions are security sensitive and can compromise the integrity of the system. Do you want to continue with the application deployment process? The application server attempts to prevent applications from performing security-sensitive operations such as: calling the System.exit() method, replacing the java 2 Security manager, and replacing the java 2 Security policy. If the application is granted the all permission (java.security.AllPermission), the java 2 Security permission checks are disabled. This compromises the integrity of the system. Review the application policy that is located in the EAR/META-INF/was.policy file. Remove the security-sensitive permissions and grant the application only the permissions that are required. ADMINAPP_HELP_ASYNCREQUESTDISPATCHTYPE=WASX7479I: "asyncRequestDispatchType" option; specifies the asynchronous request dispatch type for web container for each application. The default setting is "DISABLED" This message is for informational purposes only. No action is required. ADMINCONTROL_HELP_GETMBEANINFO_JMX=WASX7040I: Method: getMBeanInfo_jmx Arguments: object name (type ObjectName) Description: Returns the MBeanInfo structure for the MBean described by the object name. An easier way to get this information is to use the "Help" object -- for example, the "operations" command of the Help object returns information about all the operations supported by the specified MBean. This message is for informational purposes only. No action is required. WASX7282E=WASX7282E: No editing tasks are available for application "{0}" The AdminApp edit or editInteractive command did not run because specified application has no valid tasks to edit. No action is required. ADMINCONTROL_HELP_INVOKE_JMX=WASX7292I: Method: invoke_jmx Arguments: object name (type ObjectName), operation (type String), arguments (type Object[]), signature (type String[]) Description: Invoke the operation named by "operation" on the MBean described by "object name," using the arguments given in "arguments" and the signature in "signature." This message is for informational purposes only. No action is required. WASX7390E=WASX7390E: Operation not supported - testConnection command with config id and properties arguments is not supported. Use testConnection command with config id argument only. The wsadmin tool does not support this command. Do not use this command. ADMINAPP_HELP_VALIDATESCHEMA=WASX7484I: "validateSchema" option; Use this option to specify that the schema is to be validated. The default is "novalidateSchema" This message is for informational purposes only. No action is required. WASX7281E=WASX7281E: Cannot install application using file "{0}". Ensure that this file exists and is readable. The AdminApp command did not run because specified file cannot be used. Verify that this file exists and is readable. INVALID_CONN_TYPE=WASX7023E: Error creating "{0}" connection to host "{1}"; exception information: {2} The connector did not establish a connection to the host. Examine the accompanying exception information and the information in the wsadmin.traceout file to determine the cause of the error. ADMINAPP_HELP_RAR.NAME=WASX7242I: "rar.name" option; The "rar.name" option is the name for the J2CResourceAdapter. If it is not specified, then the display name in the RAR's deployment descriptor is used. If that is not specified, then the RAR file name is used. This message is for informational purposes only. No action is required. CANNOT_FIND_LANG_INTERACTIVE=WASX7014E: Cannot determine scripting language to use in interactive mode -- please specify "-lang" option on the command line. The wsadmin tool cannot determine which scripting language to use for an interactive session. Specify a value for the -lang option on the wsadmin command line, or com.ibm.ws.scripting.defaultLang property in the wsadmin.properties file. WASX7280E=WASX7280E: An application with name "{0}" does not exist. The AdminApp command did not run because the specified application does not exist. Verify that the application name is spelled correctly. WSCP_EXC_CLOSING_BRACE=WSCP0138E: Expected '}' not found There is a syntax error in a string provided in an attribute list Correct the attribute list syntax. ADMINAPP_HELP_DDLPREFIX=WASX7186I: "ddlprefix" option; specifies DDL prefix to use when invoking exportDDL. This message is for informational purposes only. No action is required. ADMINCONTROL_HELP_GETCELL=WASX7332I: Method: getCell Arguments: none Description: Returns the cell to which the scripting process is connected. This message is for informational purposes only. No action is required. ADMINCONFIG_HELP_CREATE=WASX7054I: Method: create Arguments: type, parent, attributes Description: Create a configuration object of the type named by "type," the parent named by "parent," using the attributes supplied by "attributes." Method: create Arguments: type, parent, attributes, parent attribute name, Description: Create a configuration object of the type named by "type," the parent named by "parent," using the attributes supplied by "attributes" and the attribute name in the parent given by "parent attribute name" This message is for informational purposes only. No action is required. ADMINCONFIG_HELP_GETVALIDATIONLEVEL=WASX7201I: Method: getValidationLevel Arguments: none Description: Returns a message giving the current validation level. This message is for informational purposes only. No action is required. HELP_HELP_ALL=WASX7274I: Method: classname Arguments: MBean Description: Display information about the attributes, operations, constructors, description, notifications, and classname of the specified MBean. This message is for informational purposes only. No action is required. WASX7408I=WASX7408I: The specified node configuration is successfully removed from the workspace. If you decide to commit this change to the master cell repository, you may need to perform manual steps to complete the removal steps include restoring the original application server cell configuration as the active configuration and updating the cell value in setupCmdLine.bat. If there are still running application servers for this node, you have to manually stop those servers. Removal of the node from the configuration requires some manual steps. This operation is not recommended. Alternatively, use the removeNode utility script. If you did not commit the change, run the AdminConfig reset command to restore the configuration to its initial state. ADMINAPP_HELP_ALLOWPERMINFILTERPOLICY=WASX7393I: "allowPermInFilterPolicy" option; specifies to continue with the application deployment process even when the application contains policy permissions that are in the filter policy This message is for informational purposes only. No action is required. ADMINAPP_HELP_CONTENTURI=WASX7422I: "contenturi" option: this option is used in the update or updateInteractive command to specify the URI of the file to be added, updated, or removed from the application. This option is required if content type is file or modulefile. This option is ignored for other content type values. This message is for informational purposes only. No action is required. WASX7407I=WASX7407I: The specified node configuration is successfully removed from the workspace. If you decide to commit this change to the master repository, your configuration may become invalid. To revert this operation and remove any unsaved configuration changes in the workspace, perform "AdminConfig reset" command. Removal of the node from the configuration will corrupt your configuration. If you did not commit the change, run the AdminConfig reset command to restore the configuration to its initial state. WASX7095I=WASX7095I: The AdminApp object allows application objects to be manipulated -- this includes installing, uninstalling, editing, and listing. Most of the commands supported by AdminApp operate in two modes: the default mode is one in which AdminApp communicates with the WebSphere server to accomplish its tasks. A local mode is also possible, in which no server communication takes place. The local mode operation is invoked by bringing up the scripting client with no server connected using the command line "-conntype NONE" option tor setting the "com.ibm.ws.scripting.connectionType=NONE" property in the wsadmin.properties. The following commands are supported by AdminApp; more detailed information about each of these commands is available by using the "help" command of AdminApp and supplying the name of the command as an argument. deleteUserAndGroupEntries Deletes all the user/group information for all the roles and all the user name/password information for RunAs roles for a given application edit Edits the properties of an application editInteractive Edits the properties of an application interactively export Exports application to a file exportDDL Exports DDL from application to a directory exportFile Exports content of a single file from an application to a file getDeployStatus Returns the combined Deployment status of the application help Shows help information install Installs an application, given a file name and an option string installInteractive Installs an application in interactive mode, given a file name and an option string isAppReady Checks whether the application is ready to be run list Lists all installed applications listModules Lists the modules in a specified application options Shows the options available, for a given file, application, or in general renameApplication Rename a given application publishWSDL Publishs WSDL files for a given application searchJNDIReferences Lists application that refers to the given JNDIName on a given node taskInfo Shows detailed information pertaining to a given install task for a given file uninstall Uninstalls an application, given an application name and an option string update Updates an installed application updateAccessIDs Updates the user/group binding information with accessID from user registry for a given application updateInteractive Updates an installed application interactively view Views an application or module, given an application or module name This message is for informational purposes only. No action is required. ADMINCONFIG_HELP_SAVE=WASX7124I: Method: save Arguments: none Description: Commits unsaved changes to the configuration repository This message is for informational purposes only. No action is required. WASX7406E=WASX7406E: Cannot find task name {0} in the application {1} The AdminApp view command did not run because the application viewable tasks are not valid. Specify the correct task with the correct spelling. To list the valid task names, use the -tasknames option. ADMINAPP_HELP_DEPLOYEJB.COMPLIANCELEVEL=WASX7481I: "deployejb.complianceLevel" option; specifies the JDK level for compiler compliance for EJBDeploy; default is 1.4. This message is for informational purposes only. No action is required. ADMINCONTROL_HELP_GETATTRIBUTES=WASX7044I: Method: getAttributes Arguments: object name, attributes Returns a string listing the values of the attributes named in "attributes" for the object named by "object name". This message is for informational purposes only. No action is required. ADMINCONFIG_HELP_DEFAULTS=WASX7312I: Method: defaults Arguments: type Description: Displays all the possible attributes contained by an object of type "type," along with the type and default value of each attribute, if the attribute has a default value. This message is for informational purposes only. No action is required. WASX7405E=WASX7405E: No viewable tasks are available for application "{0}" The AdminApp view command did not run because the application has no valid tasks to view. This application is not editable. WARNING_MULTIPLE_MATCHES=WASX7026W: String "{0}" corresponds to {1} different MBeans; returning first one. The AdminControl getConfigId or completeObjectName command cannot run because the ObjectName template that has been specified matches two or more running MBeans. This informational message indicates that the first matching MBean will be used. Verify that first matching MBean is correct. Otherwise, specify the desired MBean and reissue the command. WASX7093I=WASX7093I: Issuing message: "{0}" This informational message is logged when the subject message is displayed to the user. No action is required. ADMINAPP_HELP_NOCREATEMBEANSFORRESOURCES=WASX7425I: "nocreateMBeansForResources" option: this option specifies that MBeans are not created for all the resources such as servlets, jsps, EJBs, defined in an application when the application is started on a deployment target; this is the default setting. This message is for informational purposes only. No action is required. ADMINAPP_HELP_UPDATEACCESSIDS_ZOS=WASX7410I: Method: updateAccessIDs Arguments: application name, boolean:bAll Description: Updates the application binding file for an installed application with access IDs for all the users and groups. Specifying true for bAll updates all the users/groups even if there are access IDs already present in the bindings. Method: updateAccessIDs Arguments: application name, boolean:bApp Description: Updates the application binding file for an installed application with access IDs for all the users and groups. This message is for informational purposes only. No action is required. ADMINAPP_HELP_INSTALLINTERACTIVE=WASX7097I: Method: installInteractive Arguments: filename, options Description: Installs the application in the file specified by "filename" using the options specified by "options". The user is prompted for information about each relevant task. The AdminApp "options" command may be used to get a list of all possible options for a given ear file. The AdminApp "help" command may be used to get more information about each particular option. Method: installInteractive Arguments: filename Description: Installs the application specified by "filename" using default options. The user is prompted for information about each relevant task. This message is for informational purposes only. No action is required. ADMINAPP_HELP_INSTALLDIR=WASX7229I: "installdir" option; specifies the directory into which the application binaries should be placed. This option is deprecated. It is replaced by installed.ear.destination option. This message is for informational purposes only. No action is required. WASX7092I=WASX7092I: Command not logged; contains a password. This informational message is logged instead of WASX7090I if the command appears to contain a password. No action is required. ADMINAPP_HELP_NOALLOWPERMINFILTERPOLICY=WASX7394I: "noallowPermInFilterPolicy" option; specifies to not continue with the application deployment process when the application contains policy permission that are in the filter policy. This is the default setting. This message is for informational purposes only. No action is required. WASX7091I=WASX7091I: Executing script: "{0}" This is an informational message logging that this script was invoked. No action is required. ADMINCONTROL_HELP_QUERYNAMES=WASX7036I: Method: queryNames Arguments: object name Description: Returns a String containing the ObjectNames that match the input object name, which may be a wild card. This message is for informational purposes only. No action is required. ADMINAPP_HELP_INSTALLED.EAR.DESTINATION=WASX7431I: "installed.ear.destination" option; specifies the directory into which the application binaries should be placed. This message is for informational purposes only. No action is required. ADMINAPP_HELP_USEAUTOLINK=WASX7476I: "useAutoLink" option; allow the EJB reference targets to resolve automatically. The application must contain an EJB 3.0 module and all modules must share one common target to enable the autolink support. This message is for informational purpose only. No action is required. ADMINAPP_HELP_DEFAULTBINDING.CF.RESAUTH=WASX7164I: "defaultbinding.cf.resauth" option; specifies the RESAUTH for the connection factory. This message is for informational purposes only. No action is required. ADMINAPP_HELP_REDEPLOY.IGNORE.OLD=WASX7334I: This option is deprecated. Use the "update.ignore.old" option instead. This message is for informational purposes only. No action is required. WASX7090I=WASX7090I: Executing command: "{0}" This is an informational message logging that this command was invoked. No action is required. WASX8009E=WASX8009E: Invalid parameter: {0} The command does not contain the specified parameter. Verify that parameter name is spelled correctly or use help command to view detailed help for the command. ADMINAPP_HELP_EXPORT=WASX7151I: Method: export Arguments: application name, filename, options Description: Exports the application specified by "application name" to the file specified by "filename" using the options specified by "options". Method: export Arguments: application name, filename Description: Exports the application specified by "application name" to the file specified by "filename." This message is for informational purposes only. No action is required. CANNOT_FIND_LANG=WASX7013E: Cannot determine scripting language for file: "{0}" -- please specify "-lang" option on the command line. The wsadmin tool cannot determine which scripting language to use for the specified file. Specify a value for the -lang option on the wsadmin command line, or com.ibm.ws.scripting.defaultLang property in the wsadmin.properties file. WASX7328E=WASX7328E: A single attribute name must be specified for showAttribute; received: "{0}" The AdminConfig showAttribute command only displays the value of a single attribute, but multiple attribute names were supplied. Specify a single attribute name. WASX7436W=WASX7436W: At least one default binding option has been specified, but usedefaultbindings option has not been specified. The default binding option(s) will be ignored. To use any default binding option, specify the usedefaultbindings option. Specify the usedefaultbindings option in the option string with the AdminApp install, installInteractive, update, or updateInteractive command. ADMINCONTROL_HELP_ISINSTANCEOF_JMX=WASX7286I: Method: isInstanceOf_jmx Arguments: object name (type ObjectName), classname (String) Description: Returns true if the MBean described by "object name" is of the class given by "classname." This message is for informational purposes only. No action is required. WASX7219E=WASX7219E: The {0} attribute must be specified if the {1} attribute has the value "{2}" There is a constraint on the specified attribute. Specify the missing attribute. WASX8008E=WASX8008E: Command {0} does not contain any step. The command does not contain any step. Verify that step name is spelled correctly or use help command to view detailed help for the command. ADMINAPP_HELP_SEARCHJNDIREFERENCES=WASX7429I: Method: searchJNDIReferences Arguments: node or nodes config id, options Description: List all applications that refer to the specified JNDIName option on the specified node or nodes. The valid options are -JNDIName which is a required option and -verbose which is an optional option that does not take any value. The JNDIName option takes a value of a JNDI name. The verbose option will show more information. This message is for informational purposes only. No action is required. ADMINAPP_HELP_EXPORTDDL=WASX7369I: Method: exportDDL Arguments: application name, directory name, options Description: Exports DDL from the application specified by "application name" to the directory specified by "directory name" using the options specified by "options". Method: exportDDL Arguments: application name, directory name Description: Exports DDL from the application specified by "application name" to the directory specified by "directory name." This message is for informational purposes only. No action is required. ADMINAPP_HELP_CONFIGROOT=WASX7231I: "configroot" option; this option is obsolete This message is for informational purposes only. No action is required. ADMINAPP_HELP_EXPORTFILE=WASX7474I: Method: exportFile Arguments: application name, uri, filename Description: This command exports the contents of a single file which is specified by the uri argument, from the application, which is specified by the application name argument, to the file, which is specified by the file argument. Specify the uri argument within the context of an application. For example: META-INF/application.xml. For files within a module, start the uri with a module uri. For example: myapp.war/WEB-INF/web.xml. This message is for informational purposes only. No action is required. WASX7327I=WASX7327I: Contents of was.policy file: {0} The list displays the was.policy security policy file associated with this application. No action is required. WASX7435W=WASX7435W: Value {0} is converted to a boolean value of false. A string value representing a boolean is not entered as true or false. Verify that the string value is correct and reissue the command. WASX8007I=WASX8007I: Detailed help for command group: {0} Description: {1} Commands: {2} This message is for informational purposes only. No action is required. WASX7109E=WASX7109E: Insufficient data for install task "{0}" The data is not complete for an AdminApp install command for the specified task. Invoke the AdminApp taskInfo command for this file and task name to determine what information is needed for the task. WASX7326I=WASX7326I: Loaded properties file "{0}" During the initialization of a scripting process, several properties files might load. Use this message to determine which properties files that are in use. No action is required. ADMINAPP_HELP_DEPLOYWS=WASX7384I: "deployws" option; specifies to deploy WebServices during install; the default is "nodeployws" This message is for informational purposes only. No action is required. ADMINCONFIG_HELP_CONTENTS=WASX7060I: Method: contents Arguments: type Description: Displays the object types that can be contained in "type." This message is for informational purposes only. No action is required. WASX7434W=WASX7434W: Found the following deprecated option: {0} The options listed in this message are deprecated for the AdminApp command. The support for these options will be removed in a future release. Determine if there is replacement option for the deprecated option. If so, use the replacement option. If there is no replacement option, you can exclude the deprecated option. WASX7217I=WASX7217I: Connection to provided datasource was successful. The AdminControl testConnection command was successfully run. The database adapter code reported no errors or warnings. No action is required. WASX8006I=WASX8006I: Detailed help for command: {0} Description: {1} {2}Target object: {3} Arguments: {4} Steps: {5} This message is for informational purposes only. No action is required. ADMINAPP_HELP_DELETEUSERANDGROUPENTRIES=WASX7247I: Method: deleteUserAndGroupEntries Arguments: application name Description: Deletes all the user/group information for all the roles and RunAs roles for a given application. This message is for informational purposes only. No action is required. WASX7108E=WASX7108E: Invalid data specified for install task: "{0}." Errors are: "{1}" The data is not valid for an AdminApp install command for the specified task. Examine the errors reported for this task and correct the install command. ADMINAPP_HELP_USEMETADATAFROMBINARY=WASX7184I: "useMetaDataFromBinary" option; use this option to specify that the metadata (such as deployment descriptors, bindings, extensions) that are used at runtime come from the earfile; the default is "nouseMetaDataFromBinary," which means that the metadata used at runtime come from the config repository. This message is for informational purposes only. No action is required. ADMINAPP_HELP_EDIT=WASX7104I: Method: edit Arguments: application name, options Description: Modifies the application specified by "application name" using the options specified by "options". The user is not prompted for any information. This message is for informational purposes only. No action is required. ADMINAPP_HELP_UNINSTALL=WASX7102I: Method: uninstall Arguments: application name, options Description: Uninstalls application named by "application name" using the options supplied by "options". Method: uninstall Arguments: application name Description: Uninstalls the application specified by "application name" using default options. This message is for informational purposes only. No action is required. ADMINCONTROL_HELP_STARTSERVER=WASX7258I: Method: startServer Arguments: server name Description: Starts a server by locating it in the configuration and asking that node's NodeAgent to start the server. This command uses the default wait time of 1200 seconds. Note that this version of the command can only be used if the scripting process is attached to a Node Agent server. Method: startServer Arguments: server name, wait time Description: Starts a server by locating it in the configuration, synchronizing configuration data with the server's node, and asking that node's NodeAgent to start the server. The start process waits the number of seconds specified by "waittime" for the server to start. Note that this version of the command can only be used if the scripting process is attached to a Node Agent server. Method: startServer Arguments: server name, node name Description: Starts a server in the specified node by locating it in the configuration, synchronizing configuration data with the server's node and asking that node's NodeAgent to start the server. This version of the command can be used when the scripting process is attached either to a Node Agent or Deployment Manager process. Method: startServer Arguments: server name, node name, wait time Description: Starts a server in the specified node by locating it in the configuration, synchronizing configuration data with the server's node and asking that node's NodeAgent to start the server. The start process waits the number of seconds specified by "waittime" for the server to start. This version of the command can be used when the scripting process is attached either to a Node Agent or Deployment Manager process. This message is for informational purposes only. No action is required. WASX8005I=WASX8005I: Available admin command groups: {0} This message is for informational purposes only. No action is required. ADMINCONFIG_HELP_SETSAVEMODE=WASX7128I: Method: setSaveMode Arguments: save mode Description: Changes the mode used when "save" is invoked. Possible values are: "overwriteOnConflict" to save changes even if they conflict with other configuration changes; and "rollbackOnConflict" to cause a save operation to fail if changes conflict with other configuration changes; this value is the default. This message is for informational purposes only. No action is required. ADMINAPP_HELP_FILEPERMISSION=WASX7453I: "filepermission" option; Allow user to set appropriate file permissions on application files in the install destination directory. File permissions specified at the application level must be a subset of the node level file permission which defines the most lenient file permission that can be specified, otherwise node level permission value is used to set file permissions in install destination. The default is ".*\.dll=755#.*\.so=755#.*\.a=755#.*\.sl=755" The filename pattern is a regular expression. This message is for informational purposes only. No action is required. ADMINCONTROL_HELP_GETOBJECTINSTANCE=WASX7457I: Method: getObjectInstance Arguments: object name Description: Returns the ObjectInstance object that match the input object name. This message is for informational purposes only. No action is required. WASX7469E=WASX7469E: One or more attributes must be specified for resetAttributes; received: {0} The attribute will be reset is not specified. Supply the attribute to be reset. WASX7107E=WASX7107E: Invalid options specified: "{0}"; valid options are: {1} One or more options that were specified for an AdminApp or AdminConfig command is not valid. Check the spelling of the options; correct or remove any incorrect options and reissue the command. ADMINCONTROL_HELP_MAKEOBJECTNAME=WASX7048I: Method: makeObjectName Arguments: object name Description: Return an ObjectName object constructed from the "object name" string. This message is for informational purposes only. No action is required. WASX7324E=WASX7324E: Cannot copy directory "{0}" to directory "{1}" The wsadmin tool cannot copy an expanded ear directory to a temporary location for AdminApp processing. Examine the wsadmin.traceout log file to determine the problem. Verify that there is enough space in the file system and that there are no file permission problems. WASX8004I=WASX8004I: Available admin commands: {0} This message is for informational purposes only. No action is required. WASX7215E=WASX7215E: Cannot complete testConnection function because DataSourceCfgHelper MBean is not running. Please check to see if the server started correctly. The wsadmin tool needs the DataSourceCfgHelper MBean to perform the testConnection function. The MBean should be running in a server. Verify that the wsadmin process is connected to a server and the server is running. CMSG0002. ADMINCONFIG_HELP_RESET=WASX7125I: Method: reset Arguments: none Description: Discard unsaved configuration changes This message is for informational purposes only. No action is required. ADMINAPP_HELP_INSTALL=WASX7096I: Method: install Arguments: filename, options Description: Installs the application in the file specified by "filename" using the options specified by "options". All required information must be supplied in the options string; no prompting is performed. The AdminApp "options" command may be used to get a list of all possible options for a given ear file. The AdminApp "help" command may be used to get more information about each particular option. This message is for informational purposes only. No action is required. WASX7468E=WASX7468E: Connection to provided datasource on node {0} process {1} failed. The AdminControl testConnection command was failed. See exception message and wsadmin.traceout file to find what is the problem Find the problem from the log and try to resolve the problem and reissue the command. WASX7106E=WASX7106E: Unable to determine root of WebSphere installation. Please specify the "{0}" option on the command line. An AdminApp command is invoked in the local mode, but wsadmin cannot determine the installation root for WebSphere. The wsadmin.bat or wsadmin.sh launcher should set the server.root property. If you modified this launcher, correct the changes. CMSG0002. ADMINCONFIG_HELP_INSTALLRESOURCEADAPTER=WASX7342I: Method: installResourceAdapter Arguments: rar file name, node, options Description: Installs a J2C resource adapter with the rar file specified by "rar file name" using the options specified by "options" in the specified "node". The rar file name is the fully qualified file name resided in the specified node. The valid options are "rar.name", "rar.desc", "rar.archivePath", "rar.classpath", "rar.nativePath", "rar.threadPoolAlias", "rar.propertiesSet, "isolatedClassLoader", "enabledHASupport", and "HACapability. All options are optional. The "rar.name" option is the name for the J2CResourceAdapter. If it is not specified, then the display name in the rar's deployment descriptor is used. If that is not specified, then the rar file name is used. The "rar.desc" option is a description of the J2CResourceAdapter. The "rar.archivePath" is the name of the path where the file is to be extracted. If this is not specified, then the archive will be extracted to $CONNECTOR_INSTALL_ROOT directory. The "rar.classpath" is the additional class path. The "rar.threadPoolAlias" is the alias of the thread pool. The "rar.propertiesSet" is the property set of the J2CResourceAdapter. The "rar.isolatedClassLoader is the option to use isolated classloader. If it is specified, it indicated that the J2CResourceAdapter uses the isolated classloader. The default value is "false". The "rar.enableHASupport is the option to enable HA support. The default value is "false". The "rar.HACapability specifies the type of HA support. The choices are the "endpoint", "instance" and "no". This message is for informational purposes only. No action is required. WASX7323E=WASX7323E: Cannot create directory "{0}" The wsadmin tool cannot create a temporary directory for AdminApp processing. Examine the wsadmin.traceout log file to determine the problem. Verify that there is enough space in the file system and that there are no file permission problems. WASX7359E=WASX7359E: Incorrect value specified for reloadInterval option: {0}. reloadInterval option requires an integer value. The value specified for the -reloadInterval option is not an integer. Specify an integer argument for the -reloadInterval option and reissue the AdminApp command. WASX7214E=WASX7214E: Cannot resolve confid id {0} If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . This exception is unexpected. The cause is not immediately known. WASX8003E=WASX8003E: Invalid help arguments: {0} The wsadmin tool cannot run the AdminTask help command. Verify that the number of arguments, command name, or command group name is correct. Use the AdminTask help command to view a list of valid commands for the help option. ADMINCONTROL_HELP_SETATTRIBUTES=WASX7046I: Method: setAttributes Arguments: object name, attributes Description: Sets attributes given in "attributes" for the MBean described by "object name." This message is for informational purposes only. No action is required. WASX7467I=WASX7467I: Connection to provided datasource on node {0} process {1} was successful. The AdminControl testConnection command was successfully run. The database adapter code reported no errors or warnings. No action is required. WASX7105I=WASX7105I: The following install options are valid for any ear file: The wsadmin tool displays this informational message in response to an AdminApp options command. No action is required. ADMINAPP_HELP_RELOADINTERVAL=WASX7427I: "reloadInterval" option: this option specifies the time period (in seconds) in which the application's filesystem will be scanned for updated files; the default setting is 3 seconds. This message is for informational purposes only. No action is required. HELP_HELP_DESCRIPTION=WASX7271I: Method: description Arguments: MBean Description: Display the description of the specified MBean. This message is for informational purposes only. No action is required. WASX7430W=WASX7430W: This operation may take longer depending on how many applications installed on your system. Searching for JNDI references may take longer depending on how many applications installed on your system. No action is required. WASX7358E=WASX7358E: Invalid option specified: {0} The wsadmin tool found one or more options that are not valid. Check the spelling of the options. Correct or remove any incorrect options and reissue the command. INVALID_CONNECTION_TYPE=WASX7010E: Invalid connection type "{0}." Valid types are "SOAP," "RMI," "NONE," and "JMS." The connection type was supplied on the command line -conntype option or in the com.ws.scripting.connectionType property in the wsadmin.properties file is not valid. Correct the connection type on the command line or properties file. Specify "SOAP," "RMI," or "NONE." WASX7213I=WASX7213I: This scripting client is not connected to a server process; please refer to the log file {0} for additional information. The wsadmin tool could not connect to a server using the options supplied on the command line and contained in wsadmin.properties files. If a connection is not needed, no action is necessary. Specify the "-conntype NONE" option to indicate that no connection is desired. This option suppresses the WASX7213I message. If a connection is needed, restart the wsadmin tool with connection information that will allow it to connect to a running server. Alternatively, verify that the host and port information is correct. ADMINAPP_HELP_DEFAULTBINDING.STRATEGY.FILE=WASX7168I: "defaultbinding.strategy.file" option; specifies a custom default bindings strategy file This message is for informational purposes only. No action is required. ADMINAPP_HELP_UPDATE.IGNORE.NEW=WASX7368I: "update.ignore.new" option; this option specifies that when an application is updated, the bindings from the new version are ignored during the reinstall operation. This option only has meaning if the "update" option is specified; otherwise it is ignored. This message is for informational purposes only. No action is required. ADMINCONFIG_HELP_GETSAVEMODE=WASX7147I: Method: getSaveMode Arguments: none Description: Returns the mode used when "save" is invoked. Possible values are: "overwriteOnConflict" to save changes even if they conflict with other configuration changes; and "rollbackOnConflict" to cause a save operation to fail if changes conflict with other configuration changes; this value is the default. This message is for informational purposes only. No action is required. WASX8002E=WASX8002E: Invalid Command name: {0} The command name is not a valid administrative command. Verify that the command name is correct. ADMINAPP_HELP_DEPLOYEJB.VALIDATE=WASX7176I: "deployejb.validate" option; specifies that EJBDeploy should run validation; this is the default setting. This message is for informational purposes only. No action is required. WASX7357I=WASX7357I: By request, this scripting client is not connected to any server process. Certain configuration and application operations will be available in local mode. The wsadmin tool is not connected to a server process. A request was made with "-conntype NONE" option from the command line or specified in com.ws.scripting.connectionType property with NONE as the value in wsadmin.properties. No action is required. HELP_HELP_MESSAGE=WASX7362I: Method: message Arguments: Message Id Description: Display information for given message id. This message is for informational purposes only. No action is required. WASX8001I=WASX8001I: The AdminTask object enables the execution of available admin commands. AdminTask commands operate in two modes: the default mode is one which AdminTask communicates with the WebSphere server to accomplish its task. A local mode is also available, in which no server communication takes place. The local mode of operation is invoked by bringing up the scripting client using the command line "-conntype NONE" option or setting the "com.ibm.ws.scripting.connectiontype=NONE" property in wsadmin.properties file. The number of admin commands varies and depends on your WebSphere install. Use the following help commands to obtain a list of supported commands and their parameters: help -commands Lists all the admin commands help -commands <pattern> Lists admin commands matching with wildcard "pattern" help -commandGroups Lists all the admin command groups help -commandGroups <pattern> Lists admin command groups matching with wildcard "pattern" help commandName Displays detailed information for the specified command help commandName stepName Displays detailed information for the specified step belonging to the specified command help commandGroupName Displays detailed information for the specified command group There are various flavors to invoke an admin command. They are commandName Invokes an admin command that does not require any argument. commandName targetObject Invokes an admin command with the specified target object string, for example, the configuration object name of a resource adapter. The expected target object varies with the admin command invoked. Use help command to get information on the target object of an admin command. commandName options Invokes an admin command with the specified option strings. This invocation syntax is used to invoke an admin command that does not require a target object. It is also used to enter interactive mode if "-interactive" mode is included in the options string. commandName targetObject options Invokes an admin command with the specified target object and options strings. If "-interactive" is included in the options string, then interactive mode is entered. The target object and options strings vary depending on the admin command invoked. Use help command to get information on the target object and options. This message is for informational purposes only. No action is required. WASX7465E=WASX7465E: stopServer action not supported when server type is "{0}" Scripting client is connected admin subsystem and try to stop the admiagent server which is not supported. If you want to stop adminagent server you need to do it from adminagent bin directory or if you are trying to stop admin subsystem you need to connect to adminagent server directly and use AdminAgent mbean to invoke stopProfile operation. WASX7139E=WASX7139E: Operation "{0}" has versions that take one of the following number of parameters: {1}; {2} parameters were supplied: "{3}." The "operations" command on the Help object can be used to learn more about the signatures available for "{0}." No operation was defined for the AdminControl invoke command that has been issued for an MBean operation. The MBean accepts the same number of parameters specified in the AdminControl invoke command. Specify the correct number of parameters and reissue the invoke command. Use the "operations" command for the Help object to learn more about the signatures available for this operation. SECURITY_USEFIPS_DESCRIPTION=WASX7400I: This will enable the use of FIPS (Federal Information Processing Standard) approved cryptographic algorithms. Note that setting this flag does not automatically change the existing JSSE provider in the Secure Socket Layer configuration. Also note that FIPS approved JSSE provider only allows TLS protocol. This message is for informational purposes only. No action is required. WASX7320E=WASX7320E: Server "{0}" is already running on node "{1}" and cannot be started. The AdminControl startServer command did not run because the server is already started. Verify that the correct server name is specified. WASX7356E=WASX7356E: Unrecognized argument: {0}. The specified argument is not a valid node name or wait time when connected to {1}. The argument passed to the startServer command is not valid. Reissue the command with the correct value for the argument. ADMINAPP_HELP_NOALLOWSERVICEREMOTEINCLUDE=WASX7455I: "noallowServiceRemoteInclude" option; Disables an enterprise application to service an include request from an enterprise application with -allowDispatchRemoteInclude set to true. This message is for informational purposes only. No action is required. WASX7210W=WASX7210W: Cannot determine type of server; exception information: {0} The wsadmin tool cannot determine the type of server to which it is connected. Examine the wsadmin.traceout file for additional information. ADMINCONFIG_HELP_EXISTSDOCUMENT=WASX7340I: Method: existsDocument Arguments: documentURI Description: Tests to see if a document exists in the configuration repository. The "documentURI" is the document to be tested which is relative to the root of the configuration repository such as "cells/MyCell/myfile.xml". Returns a true value if the document exists; false otherwise. This message is for informational purposes only. No action is required. ADMINAPP_HELP_DELETEUSERANDGROUPENTRIES_ZOS=WASX7409I: Method: deleteUserAndGroupEntries Arguments: application name Description: Deletes all the user/group information for all the roles and RunAs roles for a given application. Method: deleteUserAndGroupEntries Arguments: application name Description: Deletes all the user/group information for all the roles and RunAs roles for a given application. This message is for informational purposes only. No action is required. ADMINCONTROL_HELP_GETDOMAINNAME=WASX7038I: Method: getDomainName Arguments: none Description: returns "WebSphere" This message is for informational purposes only. No action is required. WASX7355E=WASX7355E: The attribute "{0}" is of type "{1}"; an invalid value was supplied. The value supplied for the attribute is not valid. Correct the syntax and reissue the command. ADMINAPP_HELP_CELL=WASX7153I: "cell" option; specifies the cell name for AdminApp install functions. This message is for informational purposes only. No action is required. WASX7246E=WASX7246E: Cannot establish "{0}" connection to host "{1}" because of an authentication failure. Ensure that user and password are correct on the command line or in a properties file. Exception message (if any): "{2}" The wsadmin tool did not connect to a server process because it could not authenticate to the server. Verify that user and password are correct on the command line or in a properties file. ADMINCONFIG_HELP_PARENTS=WASX7094I: Method: parents Arguments: type Description: Displays the object types that can contain "type." This message is for informational purposes only. No action is required. TRACEFILE_NOT_WRITTABLE=WASX7448E: The trace file cannot be written to location {0}. Please specify a different location with -tracefile option. The wsadmin launcher did not run because the location that has been specified is not writable. Specify a different location for the -tracefile option and reissue the wsadmin command. WASX7354E=WASX7354E: The attribute "{0}" is an embedded object of type "{1}"; an invalid value was supplied. Specify attribute values that are embedded objects as a list of name-value pairs. An example of an embedded object consisting of three attributes is: {{attr1 val1a} {attr2 val2a}}. Correct the syntax of the command so that the embedded object is formatted as a list of name-value pairs. WSCP_EXC_UNEXPECTED_CLOSING_BRACE=WSCP0142E: Unexpected '}' found There is a syntax error in a string provided in an attribute list Correct the attribute list syntax. WASX7353E=WASX7353E: The value of the attribute "{0}" must be a collection of objects of type "{1}"; an additional set of braces may be required to signify that this is a collection. Specify attribute values that are collections of objects as a list of name-value pairs. An example of a collection consisting of two objects is: {{{attr1 val1a} {attr2 val2a}} {attr1 val1b} {attr2 val2b}}}. Correct the syntax of the command to note the attribute as a collection. WASX7389E=WASX7389E: Operation not supported - getPropertiesForDataSource command is not supported. The wsadmin tool does not support this command. Do not use this command. ADMINAPP_HELP_DEFAULTBINDING.VIRTUAL.HOST=WASX7235I: "defaultbinding.virtual.host" option; default name for virtual host. This message is for informational purposes only. No action is required. ADMINCONTROL_HELP_ISINSTANCEOF=WASX7041I: Method: isInstanceOf Arguments: object name, classname Description: Returns true if MBean described by "object name" is of the class given by "classname." This message is for informational purposes only. No action is required. ADMINAPP_HELP_RENAME=WASX7488I: Method: rename Arguments: application name, new application name Description: Renames the application specified by "application name" to the name specified by "new application name". In a WebSphere Virtual Enterprise environment, composite names are supported to allow specification of application name and edition. A composite name has the form, <name>-edition<edition>. This message is for informational purposes only. No action is required. WASX7352E=WASX7352E: Wrong number of arguments for "{0}" command. Help information follows: {1} The number of arguments supplied for the given command is not correct. Review the help information and reissue the command with the correct number of arguments. WASX7388E=WASX7388E: Connection to provided datasource failed. An error occured during invoking test connection to the provided data source. Examine the exception in the trace log and correct the problem accordingly. WASX7279E=WASX7279E: An application with name "{0}" already exists. Select a different name. The AdminApp install command did not run because the specified application name already exists. Use the -appname option to specify a different application name. ADMINCONFIG_HELP_SHOWALL=WASX7144I: Method: showall Arguments: config id Description: Shows all the attributes for the configuration object named by "config id." The showall command recursively displays the contents of all the subobjects contained inside each of the attributes. Method: showall Arguments: config id, attribute list Description: Shows the attributes specified by "attribute list" for the configuration object named by "config id." The showall command recursively displays the contents of each specified attribute. This message is for informational purposes only. No action is required. WASX7134E=WASX7134E: "{0}" option must be specified for war file installation. The -contextroot option must be specified for the AdminApp install command for invoking a war file. Specify a valid value for the -contextroot option. WASX7351I=WASX7351I: The parents command cannot be used to find the parents of type "{0}" The parents command does not support the specified object type. No action is required. WASX7387E=WASX7387E: Operation not supported - testConnection command in AdminControl scripting object is not supported when connected to a 5.0 server. Version 5.1 and later supports the testConnection command. Use the testConnectionToDataSource method in DataSourceCfgHelper MBean to test the connection of a DataSource that resides in a 5.0 server. ADMINAPP_HELP_CONTENTS=WASX7421I: "contents" option; this option is used in the update or updateInteractive command to specify the file containing the contents to be updated. Depending on the content type, the file can be a module, a partial zip, an application file, or a single file. The path to the file has to be local to the scripting client. This option is required except when delete operation is specified. This message is for informational purposes only. No action is required. WASX7278I=WASX7278I: Generated command line: {0} The installInteractive or editInteractive AdminApp commands returns the previous string that can be modified and copied into a script for use with the install or edit commands. If needed, use the command string in a script. WASX7133E=WASX7133E: Application uninstall of {0} failed: see previous messages for details. An AdminApp uninstall command did not run. See previous messages for details. WASX7350E=WASX7350E: This field requires container or per connection factory as the value. Please try again. The value for the resource authorization field was not specified. Enter "container" or "per connection factory" as the value of resource authorization. WASX7241I=WASX7241I: There are no unsaved changes in this workspace. No changes were made to the configuration by this scripting process since the last "save" or "reset" AdminConfig command. No action is required. ADMINCONTROL_HELP_QUERYNAMES_JMX=WASX7285I: Method: queryNames_jmx Arguments: object name (type ObjectName), query (type QueryExp) Description: Returns a Set containing ObjectNames that match the input object name and query. This message is for informational purposes only. No action is required. CLASSPATH_REQUIRES_ARG=WASX7299E: "-wsadmin_classpath" option must be followed by a classpath. The wsadmin launcher has been invoked with the -wsadmin_class path option, but no class path argument was found. Specify a class path for the -wsadmin_classpath option and reissue the wsadmin command. WASX7132E=WASX7132E: Application install for {0} failed: see previous messages for details. An AdminApp install command did not run. See previous messages for details. WASX7240I=WASX7240I: Resetting workspace at the start of a scripting session; workspace reports unsaved changes in the following files: {0} If a scripting session begins with unsaved changes in the workspace, the workspace resets and the unsaved changes are lost. No action is required. WASX7131E=WASX7131E: Runtime exception: "{0}" The wsadmin tool created a RuntimeMBeanException exception from an MBean. Examine the exception information and modify the command. ADMINCONTROL_HELP_GETNODE=WASX7304I: Method: getNode Arguments: none Description: Returns the node to which the scripting process is connected. This message is for informational purposes only. No action is required. ADMINAPP_HELP_DEPLOYEJB.CLASSPATH=WASX7174I: "deployejb.classpath" option; specifies extra classpath to be used for EJBDeploy This message is for informational purposes only. No action is required. CONN_REQUIRES_HOST=WASX7020E: The "{0}" connection type requires that a host be specified in a properties file or with "-host" on the command line. A host must be specified for the connection type. Specify a valid host with the -host command line option or the com.ibm.ws.scripting.host property in wsadmin.properties. WASX7130E=WASX7130E: The requested operation is not supported. The wsadmin tool created an UnsupportedOperationException exception from an MBean. This exception might result from an AdminControl invoke command. Check the spelling of the operation. ADMINCONFIG_HELP_UNINSTALLRESOURCEADAPTER=WASX7396I: Method: uninstallResourceAdapter Arguments: config id Description: Uninstall a J2C resource adapter by the "config id" Method: uninstallResourceAdapter Arguments: config id, option list Description: Uninstall a J2C resource adapter by the "config id" using options in "option list". Option list is optional. The valid option is "force". The "force" option will force the uninstall of resource adapter without checking whether the resource adapter is still being used by any application. If this option is not specified and the specified resource adapter is still in use, the resource adapter will not be uninstalled. This message is for informational purposes only. No action is required. ADMINAPP_HELP_DISTRIBUTEAPP=WASX7182I: "distributeApp" option; specifies that the application management component should distribute application binaries. This is the default setting. This message is for informational purposes only. No action is required. RECONNECT_COMPLETE=WASX7074I: Reconnect of {0} connector to host {1} completed. The AdminControl reconnect command completed successfully. No action is required. ERROR_READING_FILE=WASX7016E: Exception received while reading file "{0}"; exception information: {1} An IO exception occurred while reading a script or profile. Examine the wsadmin.traceout log file to determine the problem. Verify that there is enough space in the file system, and that there are no file permission problems. ADMINAPP_HELP_EXTRACTDDL=WASX7152I: This method is deprecated. Use exportDDL instead. This message is for informational purposes only. No action is required. ADMINAPP_HELP_PUBLISHWSDL=WASX7385I: Method: publishWSDL Arguments: application name, filename, soapAddressPrefixes Description: Publish WSDL files for the application specified to the file specified by "filename" using the soap address prefixes. The soapAddressPrefixes is a compound parameter that defines url endpoint information for the soap addresses in each module. This information is used to customize the SOAP addresses in the published WSDL. Method: publishWSDL Arguments: application name, filename Description: Publish WSDL files for the application specified to the file specified by "filename". This message is for informational purposes only. No action is required. ADMINCONTROL_HELP_ISREGISTERED=WASX7042I: Method: isRegistered Arguments: object name Description: Returns true if supplied object name is registered. This message is for informational purposes only. No action is required. ADMINAPP_HELP_DEPLOYWS.CLASSPATH=WASX7382I: "deployews.classpath" option; specifies extra classpath to be used to deploy WebServices This message is for informational purposes only. No action is required. WASX7198W=WASX7198W: The configuration service is not running. Configuration commands will not run. No connection was obtained to the configuration service. Restart the wsadmin tool to obtain a server connection. ADMINAPP_HELP_DEFAULTBINDING.DATASOURCE.USERNAME=WASX7161I: "defaultbinding.datasource.username" option; specifies the user name for the default datasource This message is for informational purposes only. No action is required. ADMINAPP_HELP_ALLOWDISPATCHREMOTEINCLUDE=WASX7451I: "allowDispatchRemoteInclude" option; Enables an enterprise application to dispatch includes to resources across web modules in different JVMs in a managed node environment via the standard RequestDispatcher mechanism. This message is for informational purposes only. No action is required. SECURITY_USEFIPS_BACKUP_DESCRIPTION=WASX7403I: This will enable the use of FIPS (Federal Information Processing Standard) approved cryptographic algorithms. Note that setting this flag does not automatically change the existing JSSE provider in the Secure Socket Layer configuration. Also note that FIPS approved JSSE provider only allows TLS protocol. Moreover, the FIPS approved LTPA authentication mechanism is not backward compatible with non-FIPS approved LTPA implementation that is used in all prior version of WebSphere Application Server products. This message is for informational purposes only. No action is required. ADMINCONTROL_HELP_GETHOST=WASX7032I: Method: getHost Arguments: none Description: Returns the host to which the scripting process is connected. This message is for informational purposes only. No action is required. WASX7197E=WASX7197E: Error creating validation output file {0}; exception information: {1} The wsadmin tool cannot open an output file for validation results. The wsadmin tool cannot create this file. Examine the wsadmin.traceout log file to determine the problem. Verify that there is enough space in the file system and that there are no file permission problems. ADMINCONFIG_HELP_CREATEUSINGTEMPLATE=WASX7212I: Method: createUsingTemplate Arguments: type, parent, attributes, template Description: Creates an object of the given type with the given parent. The specified template is used as the basis for this new object, and the specified attributes override settings in the template. The template parameter is a configuration ID of an existing object -- . this object can be either a template object, returned by using the listTemplates command, or any other existing object of the correct type. This message is for informational purposes only. No action is required. ADMINCONFIG_HELP_MODIFY=WASX7058I: Method: modify Arguments: config id, attributes Description: Changes the attributes specified by "attributes" for the configuration object named by "config id." This message is for informational purposes only. No action is required. WASX7088E=WASX7088E: Invalid numeric value specified for attribute "{0}" An attribute specified by an AdminConfig create or modify command requires a numeric data type. Specify a numeric value for the attribute. ERROR_RUNNING_FILE=WASX7017E: Exception received while running file "{0}"; exception information: {1} The script or profile cannot run. The wsadmin tool created an exception. Examine the wsadmin.traceout log file to determine the problem. CONN_REQUIRES_INTEGER_PORT=WASX7008E: {0} connection type requires an integer port; found: "{1}" The wsadmin launcher has been invoked with the -port option, but the string following -port is not an integer. Specify an integer port argument for the -port option and reissue the wsadmin command. WASX7196E=WASX7196E: Cannot write to validation output file "{0}" The wsadmin tool cannot open an output file for validation results. The file exists on your system, but the wsadmin tool cannot write to it. Examine the wsadmin.traceout log file to determine the problem. Verify that there is enough space in the file system and that there are no file permission problems. ADMINAPP_HELP_ISAPPREADY=WASX7439I: Method: isAppReady Arguments: application name Description: Tests to see if the specified application has been distributed and is ready to be run. Returns true if the application is ready; false otherwise. Arguments: application name, ignoreUnknownState Description: Tests to see if the specified application has been distributed and is ready to be run. Valid values for ignoreUnknownState argument are true or false. If true is specified as its value, then any node or server with unknown state is not included in the final ready return. Returns true if the application is ready; false otherwise. This message is for informational purposes only. No action is required. ADMINCONTROL_HELP_SETATTRIBUTE_JMX=WASX7290I: Method: setAttribute_jmx Arguments: object name (type ObjectName), attribute (type Attribute) Description: Sets the Attribute contained in "attribute" for the MBean described by "object name." This message is for informational purposes only. No action is required. WASX7087E=WASX7087E: Invalid value for attribute "{0}" -- valid values are "{1}" The value specified for an AdminConfig create or modify command attribute of some ENUM type is not a valid value. Specify one of the valid values for the ENUM attribute. See the WASX7087E error message for the possible values. ADMINAPP_HELP_NOVALIDATESCHEMA=WASX7485I: "validateSchema" option; Use this option to specify that the schema is not to be validated. This is the default. This message is for informational purposes only. No action is required. WASX7195I=WASX7195I: Severity {0}; line {1}; target "{2}"; {3} The user requested validation. By default, the name of the file is wsadmin.valout, located in the logs directory. Fix any configuration problems noted by the previous message. ADMINAPP_HELP_DEPLOYEJB.PRECOMPILEJSPS=WASX7180I: "deployejb.preCompileJSPs" option; specifies that EJBDeploy should pre-compile JSPs; the default setting is "nodeployejb.preCompileJSPs" This message is for informational purposes only. No action is required. HELP_HELP_ADMINTASK=WASX7461I: Method: AdminTask Arguments: none Description: Display general help information for the AdminTask object provided by wsadmin. This message is for informational purposes only. No action is required. WASX7086E=WASX7086E: Unable to determine relationship information for type "{0}" The wsadmin tool could not run an AdminConfig parents command. This exception is unexpected. The cause is not immediately known. WASX7194I=WASX7194I: Number of messages of severity {0}: {1} This message provides a summary of messages generated during configuration validation. No action is required. ADMINCONFIG_HELP_ATTRIBUTES=WASX7061I: Method: attributes Arguments: type Description: Displays all the possible attributes contained by an object of type "type." The attribute types are also displayed; when the attribute represents a reference to another object, the type of the tattribute has a suffix of "@." When the attribute represents a collection of objects, the type is listed with a suffix of "*." If the type represents a base type, possible subtypes are listed after the base type in parenthesis. If the type is an enumeration, it is listed as "ENUM," followed by the possible values in parentheses. This message is for informational purposes only. No action is required. ADMINCONTROL_HELP_SETATTRIBUTE=WASX7045I: Method: setAttribute Arguments: object name, attribute name, attribute value Description: Sets the attribute with name "attribute name" to the value given by "attribute value" for the MBean described by "object name." This message is for informational purposes only. No action is required. ADMINAPP_HELP_NOVALIDATEAPP=WASX7226I: "novalidateApp" option; this option is obsolete This message is for informational purposes only. No action is required. ADMINAPP_HELP_DEPLOYEJB.DBNAME=WASX7171I: "deployejb.dbname" option; specifies the database name for EJBDeploy; default is"was50." This message is for informational purposes only. No action is required. ADMINCONTROL_HELP_INVOKE=WASX7047I: Method: invoke Arguments: object name, operation Description: Invoke the operation named by "operation" on the MBean described by "object name." No arguments are passed for the operation. Method: invoke Arguments: object name, operation, arguments Description: Invoke the operation named by "operation" on the MBean described by "object name" using the parameters described by "arguments." If no arguments are required for this operation, the "arguments" parameter may be omitted. Method: invoke Arguments: object name, operation, arguments, signature Description: Invoke the operation named by "operation" on the MBean described by "object name" using the parameters described by "arguments" and the signatures described by "signature." This message is for informational purposes only. No action is required. WASX7193I=WASX7193I: Validation results are logged in {0}: Total number of messages: {1} Validation is complete. Optional- Examine the messages logged in the specified file to see if corrective action is needed. WASX7084E=WASX7084E: No help available for : "{0}" No help is available for the argument that has been specified with the help <argument> command. Verify that the argument is a valid argument for help. Reissue the "help" command without the argument for a list of valid options. ADMINAPP_HELP_RELOADENABLED=WASX7378I: "reloadEnabled" option; this option specifies to enable class reloading; this is the default setting. This message is for informational purposes only. No action is required. CONNECTOR_NOT_AVAIL=WASX7063E: Error creating "{0}" connection to server: server may not be running; connector properties: {1}; exception information: {2} The connector did not establish a connection to the server. Examine the accompanying exception information and the information in the wsadmin.traceout file to determine the cause of the error. The server might not be running. WASX7083E=WASX7083E: Cannot find config object: "{0}" The wsadmin tool cannot find the configuration object specified by an AdminConfig command. Specify a valid configuration object. ADMINAPP_HELP_RAR.ARCHIVEPATH=WASX7244I: "rar.archivePath" option; this option is the name of the path where the file is assume to reside. If this is not specified, then the path is taken to be given by CONNECTOR_INSTALL_ROOT This message is for informational purposes only. No action is required. ADMINCONFIG_HELP_SETVALIDATIONLEVEL=WASX7200I: Method: setValidationLevel Arguments: level Description: Sets the validation level to one of five possibilities: none, low, medium, high, or highest. This message is for informational purposes only. No action is required. LANGUAGE_NOT_REGISTERED=WASX7018E: Language "{0}" is not registered to BSF. An unsupported scripting language was specified. Specify a supported scripting language with the -lang option or com.ibm.ws.scripting.defaultLang option. HELP_GENERAL_HELP=WASX7028I: The Help object has two purposes: First, provide general help information for the objects supplied by wsadmin for scripting: Help, AdminApp, AdminConfig, AdminControl and AdminTask. Second, provide a means to obtain interface information about MBeans running in the system. For this purpose, a variety of commands are available to get information about the operations, attributes, and other interface information about particular MBeans. The following commands are supported by Help; more detailed information about each of these commands is available by using the "help" command of Help and supplying the name of the command as an argument. attributes Given an MBean, returns help for attributes operations Given an MBean, returns help for operations constructors Given an MBean, returns help for constructors description Given an MBean, returns help for description notifications Given an MBean, returns help for notifications classname Given an MBean, returns help for classname all Given an MBean, returns help for all the above help Returns this help text AdminControl Returns general help text for the AdminControl object AdminConfig Returns general help text for the AdminConfig object AdminApp Returns general help text for the AdminApp object AdminTask Returns general help text for the AdminTask object wsadmin Returns general help text for the wsadmin script launcher message Given a message id, returns explanation and user action message This message is for informational purposes only. No action is required. WASX7082E=WASX7082E: The creation of a {1} in a {0} object requires that an attribute name be specified, because more than one attribute exists with the same type. Please specify one of the following attribute names as a fourth parameter to the "create" method: {2} When an object is created with AdminConfig, wsadmin determines what attribute name to use for the new object in the parent. In certain cases, the wsadmin tool cannot determine this information if the parent object contains more than one attribute of the type being created. Use the AdminConfig create command that uses four parameters. As a fourth parameter, supply one of the attribute names supplied in this message. ADMINCONTROL_HELP_TESTCONNECTION=WASX7148I: Method: testConnection Arguments: config id Description: Tests the connection to a DataSource. The "config id" argument is the configuration ID of a DataSource object. The DataSource object passed in has to be saved in the configuration before attempting to run testConnection. This message is for informational purposes only. No action is required. WASX7190I=WASX7190I: Validation at level {0} with cross-document validation {1}, requested at {2} for action "{3}" The wsadmin tool writes this informational message to the validation output file each time validation is requested. No action is required. WASX7428W=WASX7428W: contextroot option will be ignored if module exists. Use the contextroot option with the update command, the modulefile content type, and the update or addupdate operation. For an update operation with a modulefile content type, the wsadmin tool ignores the contextroot option. For the addupdate operation with a modulefile the content type, the wsadmin tool ignores the contextroot option if the module exists. This message is for the informational purposes only. DASH_LANG_NEEDS_FOLLOWING_LANGUAGE=WASX7006E: "-lang" option must be followed by a language identifier. The wsadmin launcher has been invoked with the -lang option, but no language argument was found. Specify a supported scripting language for the -lang option and reissue the wsadmin command. WASX7081E=WASX7081E: Error obtaining enum information: exception information: "{0}" The wsadmin tool could not initialize an enum attribute. This exception is unexpected. The cause is not immediately known. INCOMPATIBLE_NODE=WASX8022E: Incompatible node version; exception information: {0} The wsadmin tool is connecting to an incompatible server or deployment manager node. Ensure that the wsadmin tool connect to the same or higher version of the server or deployment manager node. WASX7319I=WASX7319I: The {0} attribute is set to false. A start will be attempted for server "{1}" but the configuration information for node "{2}" may not be current. The wsadmin tool is using the startServer command to start a server. The configuration used by the starting server may not be the most recent configuration because the configuration has not be synchronized for this node. If the configuration is incorrect, stop the server and invoke a configuration synchronization for this node. WASX7080E=WASX7080E: Invalid attributes specified for type "{0}" -- "{1}" An attribute name that has been specified for the given type is not valid. Specify a valid attribute name. Run the AdminConfig attributes command for a list of valid attribute names. HELP_HELP_ADMINCONTROL=WASX7277I: Method: AdminControl Arguments: none Description: Display general help information for the AdminControl object provided by wsadmin. This message is for informational purposes only. No action is required. HELP_HELP_WSADMIN=WASX7462I: Method: wsadmin Arguments: none Description: Display general help information for the wsadmin script launcher. This message is for informational purposes only. No action is required. EXTENSION_PARSER_EXCEPTION_MESSAGE=WASX7386E: {0} in {1} at line {2} column {3} {4} A parser exception occured when getting the scripting extension. Examine the exception in the trace log and correct the problem accordingly. ADMINCONFIG_HELP_REMOVE=WASX7055I: Method: remove Arguments: config id Description: Removes the configuration object named by "config id." This message is for informational purposes only. No action is required. WASX7209I=WASX7209I: Connected to process "{0}" on node {1} using {2} connector; The type of process is: {3} The wsadmin tool has connected to a server during initialization. No action is required. ADMINCONTROL_HELP_SETATTRIBUTES_JMX=WASX7291I: Method: setAttributes_jmx Arguments: object name (type ObjectName), attributes (type AttributeList) Description: Sets attributes in the MBean described by "object name." The attribute names and values are contained in the "attributes" argument. This message is for informational purposes only. No action is required. WASX7208I=WASX7208I: Validation settings in effect now: Level={0}, Cross-validation={1}, Output file={2} The wsadmin tool is initialized or validation settings have been changed. No action is required. CONTROL_SERVICE_NOT_AVAILABLE=WASX7072E: The control service is not available. The wsadmin tool is initialized but cannot connect to a server. Reissue the wsadmin command to create a server connection. WASX7316W=WASX7316W: Error creating Dynamic Scripting object. These objects will not be available -- "{0}". Please use the generic AdminControl facilities. The dynamic scripting objects did not initialize. Use the AdminControl invoke and get/setAttribute(s) commands to interact with MBeans instead of dynamic scripting support. ADMINAPP_HELP_LOCAL=WASX7156I: "local" option; specifies that the AdminApp function will be performed in local mode, without communicating with a server. This option is deprecated. Use "-conntype NONE" in the command line or "com.ws.scripting.connectionType=NONE" in wsadmin.properties to perfrom AdminApp function in local mode. This message is for informational purposes only. No action is required. ERROR_RUNNING_COMMAND=WASX7022E: Problem running command "{0}" -- exception information: {1} The wsadmin tool created an exception when executing the command. Examine the exception information provided in the message to determine the appropriate user action. ADMINAPP_HELP_VERBOSE=WASX7233I: "verbose" option; this option causes additional messages to be displayed during install. This message is for informational purposes only. No action is required. ADMINCONFIG_HELP_QUERYCHANGES=WASX7127I: Method: queryChanges Arguments: none Description: Returns a list of unsaved configuration files This message is for informational purposes only. No action is required. WASX7315W=WASX7315W: Failed to generated dynamic scripting object: "{0}" A dynamic scripting object did not initialize. This exception is unexpected. The cause is not immediately known. ADMINAPP_HELP_NODE=WASX7154I: "node" option; specifies the node name for AdminApp install functions. This message is for informational purposes only. No action is required. WASX7206W=WASX7206W: The application management service is not running. Application management commands will not run. No connection was obtained to the application management service. Restart the wsadmin tool to obtain a server connection, or use "-conntype NONE" option to run the local mode. ADMINAPP_HELP_NOUSEDEFAULTBINDINGS=WASX7159I: "nousedefaultbindings" option; specifies that default bindings are not used for install; this is the default setting. This message is for informational purposes only. No action is required. ADMINAPP_HELP_DEFAULTBINDING.FORCE=WASX7167I: "defaultbinding.force" option; specifies that the default bindings should override current bindings. This message is for informational purposes only. No action is required. ADMINAPP_HELP_USEDEFAULTBINDINGS=WASX7158I: "usedefaultbindings" option; specifies that default bindings are to used for install. Default is "nousedefaultbindings" This message is for informational purposes only. No action is required. ADMINAPP_HELP_DEPLOYEJB.DBACCESSTYPE=WASX7463I: "deployejb.dbaccesstype" option; specifies the database access type for EJBDeploy This message is for informational purposes only. No action is required. WASX7459E=WASX7459E: The configuration service is not available. Target node's nodeagent may not be running "{0}." The AdminConfig object was specified, but the wsadmin process is not connected to a server with a running configuration service. If the node agent of the target node is not running, start it and reissue the wsadmin command. RECONNECT_FAILED=WASX7073E: Attempt to reconnect to the server failed for the following objects: {0}; server may no longer be running. The AdminControl reconnect command did not reconnect to the server. Examine the accompanying exception information and the information in the wsadmin.traceout file to determine the cause of the error. The server might not be running. WASX7314I=WASX7314I: Finished generating Dynamic Scripting Objects. The wsadmin tool initialized the dynamic scripting objects. No action is required. METHOD_NOT_SUPPORTED=WASX7440E: "{0}" method is not supported when connecting to local mode. The wsadmin tool is connected to local mode. Verify that the scripting client is connected to a server and that the server is running. HELP_HELP_OPERATIONS=WASX7269I: Method: operations Arguments: MBean Description: Display information about the operations of the specified MBean. Method: operations Arguments: MBean, operation name Description: Display information about the specified operation on the specified MBean. This message is for informational purposes only. No action is required. ADMINAPP_HELP_NODEPLOYEJB.VALIDATE=WASX7177I: "nodeployejb.validate" option; specifies that EJBDeploy should not run validation; the default setting is "deployejb.validate" This message is for informational purposes only. No action is required. ADMINAPP_HELP_PROCESSEMBEDDEDCONFIG=WASX7437I: "processEmbeddedConfig" option; Use this option to process the embedded configration data that is included in the application. This setting is the default. This message is for informational purposes only. No user action is required. WASX7458E=WASX7458E: Invalid file permission string "{0}" The parameter value for file permission is not valid. Specify a file permission value with a valid string. ADMINAPP_HELP_DEPLOYWS.JARDIRS=WASX7383I: "deployews.jardirs" option; specifies extra extension directories to be used to deploy WebServices This message is for informational purposes only. No action is required. WASX7313I=WASX7313I: Generating Dynamic Scripting Objects. Please Wait... The wsadmin tool is initializing the dynamic scripting objects. No action is required. WASX7349I=WASX7349I: Possible value for resource authorization is container or per connection factory This message is for informational purposes only. No action is required. ADMINAPP_HELP_BUILDVERSION=WASX7450I: "buildVersion" option; specifies the build version of an application ear file. This message is for informational purposes only. No action is required. ADMINCONFIG_HELP_SHOWATTRIBUTE=WASX7329I: Method: showAttribute Arguments: config id, attribute Description: Shows the value of the single attribute specified for the configuration object named by "config id." The output of this command is different from the output of "show" when a single attribute is specified: the showAttribute command does not display a list containing the attribute name and value; rather, the attribute value alone is displayed. This message is for informational purposes only. No action is required. ADMINAPP_HELP_REDEPLOY.IGNORE.NEW=WASX7335I: This option is deprecated. Use the "update.ignore.new" option instead. This message is for informational purposes only. No action is required. ADMINCONFIG_HELP_LIST=WASX7056I: Method: list Arguments: type Description: Lists all the configuration objects of the type named by "type." Method: list Arguments: type, scope Description: Lists all the configuration objects of the type named by "type" within the scope of the configuration object named by "scope." Method: list Arguments: type, pattern Description: Lists all the configuration objects of the type named by "type" matching with the wildcard "pattern". This message is for informational purposes only. No action is required. ADMINAPP_HELP_CUSTOM=WASX7433I: "custom" option; specifies a name-value pair using the format name=value. Use this option to pass option to application deployment extension. Consult application deployment extension documentation for available custom options. This message is for informational purposes only. No action is required. ADMINCONFIG_HELP_VALIDATE=WASX7199I: Method: validate Arguments: none Description: Requests configuration validation results based on the files in your workspace, the value of the cross-document validation enabled flag, and the validation level setting. Method: validate Arguments: config id Description: Requests configuration validation results based on the files in your workspace, the value of the cross-document validation enabled flag, and the validation level setting. The scope of this request is the object named by "config id." This message is for informational purposes only. No action is required. WASX7348I=WASX7348I: Each element of the {0} task consists of the following {1} fields: {2} Of these fields, the following are required and used as keys to locate the rows in the task: {3} and the following may be assigned new values: {4} The current contents of the task after running default bindings are: {5} The previous information results from an AdminApp taskInfo command and details the task information requested. No action is required. SECURITY_NONFIPS_SSL=WASX7401W: The security policy is set to use only FIPS approved cryptographic algorithms, however at least one SSL configuration may not be using a FIPS approved JSSE provider. FIPS approved cryptographic algorithms may not be used in those cases. When security policy is set to use only FIPS approved cryptographic algorithms, no SSL configuration can use FIPS approved JSSE provider. Examine the exception in the trace log and correct the problem accordingly. WASX7239E=WASX7239E: Unexpected error setting attribute "{0}" of type "{1}" to value "{2}." Additional information may be found in the trace log. The wsadmin tool did not invoke the AdminConfig modify or create command. Examine the wsadmin.traceout log for more information. WASX7347E=WASX7347E: An argument is required for option "{0}." The specified option requires an accompanying argument. For example, if you specify the "-node" option, you must follow the "-node" option with the name of a node such as "-node mynode." Specify an argument for the indicated option, or remove the option from the command. HELP_HELP_CONSTRUCTORS=WASX7270I: Method: constructors Arguments: MBean Description: Display information about the constructors of the specified MBean. This message is for informational purposes only. No action is required. ADMINCONFIG_HELP_CHECKIN=WASX7295I: Method: checkin Arguments: documentURI, filename, digest Description: Checks a file named by "filename" into the configuration repository that is described by the "documentURI". The "documentURI" is relative to the root of the configuration repository such as "cells/MyCell/nodes/MyNode/serverindex.xml" which must exist in the repository, and the "filename" is the name of the source file to check in and it must be a valid local file name such as "c:/myfile". The "digest" parameter should be the opaque object which is returned by a prior extract command of AdminConfig object. This message is for informational purposes only. No action is required. TRACE_FILE_REQUIRES_ARG=WASX7446E: "-tracefile" option must be followed by a file path. The wsadmin launcher did not run because no logfile argument was found for the -tracefile option. Specify a file path for the -tracefile option and reissue the wsadmin command. FILE_NOT_FOUND=WASX7011E: Cannot find file "{0}" The wsadmin launcher has been invoked with an option that requires the name of a file, but the file cannot be found. Correct the name of the file specified by the -p, -f, or -profile option, or in a wsadmin.properties file. ADMINAPP_HELP_NORELOADENABLED=WASX7426I: "noreloadEnabled" option: this option specifies not to enable class reloading; the default is reloadEnabled. This message is for informational purposes only. No action is required. WASX7129E=WASX7129E: Cannot create objects of type "{0}" in parents of type "{1}" The parent that has been specified with the AdminConfig create command is not valid. Specify a valid parent object for the object to create and reissue the command. WASX7237W=WASX7237W: The attribute "{0}" has a type that is not supported by the String signatures of AdminControl -- the type is "{1}." AdminControl will attempt to convert the attribute to and from String type, but this may not give the desired result. Use the native JMX object signatures for actions involving this type. The AdminControl setAttribute command contains an attribute type that is not supported by the setAttribute command. Use the setAttribute_jmx command to set this attribute. WASX7346E=WASX7346E: Cannot locate NodeAgent object for server "{0}" of process type {1}. The wsadmin tool cannot run the AdminControl stopServer command because the node agent for the specified server is not located in the configuration. Verify that the client is connected to the appropriate process type. ADMINAPP_HELP_NOUSEMETADATAFROMBINARY=WASX7185I: "nouseMetaDataFromBinary" option; use this option to specify that the metadata (such as deployment descriptors, bindings, extensions) that are used at runtime come from the config repository; this is the default setting. Use "useMetaDataFromBinary," to indicate that the metadata used at runtime come from the earfile. This message is for informational purposes only. No action is required. ADMINCONTROL_HELP_ISALIVE=WASX7035I: Method: isAlive Arguments: none Description: Is the client session alive? This message is for informational purposes only. No action is required. ADMINAPP_HELP_SERVER=WASX7155I: "server" option; specifies the server name for AdminApp install functions. This message is for informational purposes only. No action is required. WSCP_EXC_CLOSING_QUOTE=WSCP0169E: Expected " not found There is a syntax error in a string provided in an attribute list Correct the attribute list syntax. ADMINAPP_HELP_GETDEPLOYSTATUS=WASX7460I: Method: getDeployStatus Arguments: application name Description: Returns a string which represents the deployment status of the application. The status of each node, to which the application is deployed, is concatenated by the "+" character. This message is for informational purposes only. No action is required.