INVALID_PROPERTY_DESTINATION_CWSJR1188=CWSJR1188E: The destination on a JMS activation specification must be given a value During validation of the properties configured on a JMS activation specification, the destination was found not to be valid. Correct the value of the destination property on the activation specification, then restart the server. INVALID_PROPERTIES_CWSJR1181=CWSJR1181E: The JMS activation specification has invalid values - the reason(s) for failing to validate the JMS activation specification are: {0} During validation of the properties configured on a JMS activation specification, one or more properties were found that are not valid. Correct the values of the properties on the JMS activation specification, then restart the server. ILLEGAL_STATE_CWSJR1142=CWSJR1142E: An internal error has occurred. An unexpected exception has occurred. A call was made to {0} but there is no local transaction. The method call is not allowed if there is no local transaction. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . ILLEGAL_STATE_CWSJR1141=CWSJR1141E: An internal error has occurred. An unexpected exception has occurred. A call was made to {0} but there is no local transaction. The method call is not allowed if there is no local transaction. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . ILLEGAL_STATE_CWSJR1140=CWSJR1140E: An internal error has occurred. An unexpected exception has occurred. A call was made to {0} but there is no local transaction. The method call is not allowed if a global transaction is active. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . UNEXPECTED_ENDPOINT_CWSJR1482=CWSJR1482E: An internal error occurred. The message endpoint {0} does not implement the expected interface {1}. The message endpoint factory has returned a message endpoint that does not implement the MessageListener interface as expected. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . NOT_SUPPORTED_EXCEPTION_CWSJR1462=CWSJR1462E: The connection to the messaging engine does not support the container-managed persistence sharing optimization. The connection the service integration technologies JMS resource adapter has obtained does not support the container-managed persistence optimization because it is to a remote messaging engine. Ensure that there is a local messaging engine available to which the resource adapter can connect, or disable the sharing optimization on the connection factory definition using the administrative console. ILLEGAL_STATE_CWSJR1139=CWSJR1139E: An internal error has occurred. An unexpected exception has occurred. A call was made to {0} but there is no local transaction. The method call is not allowed if there is no local transaction. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . CONTAINER_AUTHORIZATION_EXCEPTION_1075=CWSJR1075E: It was not possible to authenticate because no authentication alias was specified. An application used a resource reference to look up a connection factory. The resource reference was configured to use container-managed authentication, but an authentication alias was not associated with the resource reference. Ensure that an authentication alias is associated with this resource reference. ILLEGAL_STATE_CWSJR1138=CWSJR1138E: An internal error has occurred. An unexpected exception has occurred. A call was made to {0} but there is no local transaction. The method call is not allowed if a global transaction is active. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . ILLEGAL_STATE_CWSJR1137=CWSJR1137E: An internal error has occurred. A call was made to {0} after the session was invalidated. The method call is not allowed when the session is no longer valid. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . ILLEGAL_STATE_CWSJR1136=CWSJR1136E: An internal error has occurred. A call was made to {0} after the session was invalidated. The method call is not allowed when the session is no longer valid. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . ILLEGAL_STATE_CWSJR1135=CWSJR1135E: An internal error has occurred. A call was made to {0} after the session was invalidated. The method call is not allowed when the session is no longer valid. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . ILLEGAL_STATE_CWSJR1134=CWSJR1134E: An internal error has occurred. A call was made to {0} after the session was invalidated. The method call is not allowed when the session is no longer valid. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . CONTAINER_AUTHORIZATION_EXCEPTION_1070=CWSJR1070E: It was not possible to authenticate because no authentication alias was specified. An application used a resource reference to look up a connection factory. The resource reference was configured to use container-managed authentication, but an authentication alias was not associated with the resource reference. Ensure that an authentication alias is associated with this resource reference. ILLEGAL_STATE_CWSJR1133=CWSJR1133E: An internal error has occurred. A call was made to {0} after the session closed. The method cannot be called after the session is closed. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . ILLEGAL_STATE_CWSJR1132=CWSJR1132E: An internal error has occurred. A call was made to {0} after the session closed. The method cannot be called after the session is closed. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . ILLEGAL_STATE_CWSJR1131=CWSJR1131E: An internal error has occurred. A call was made to {0} after the session closed. The method cannot be called after the session is closed. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . ILLEGAL_STATE_CWSJR1130=CWSJR1130E: An internal error has occurred. A call was made to {0} after the session closed. The method cannot be called after the session is closed. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . INVALID_PROPERTY_SHARECMP_CWSJR1200=CWSJR1200E: The share data source with CMP field on a JMS activation specification must be set During validation of the properties configured on a JMS activation specification, the share data source with CMP was found not to be valid. Correct the value of the share data source with CMP property on the activation specification, then restart the server. ILLEGAL_STATE_CWSJR1125=CWSJR1125E: An internal error has occurred. A call was made to {0} but there is no local transaction. The method call is not allowed if there is no local transaction. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . ILLEGAL_STATE_CWSJR1124=CWSJR1124E: An internal error has occurred. A call was made to {0} after the session was invalidated. The method call is not allowed when the session is no longer valid. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . ILLEGAL_STATE_CWSJR1123=CWSJR1123E: An internal error has occurred. A call was made to {0} after the session closed. The method cannot be called after the session is closed. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . ILLEGAL_STATE_CWSJR1086=CWSJR1086E: An internal error has occurred. A call was made to the method {0} after the connection was closed. The method cannot be called after the connection is closed. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . ILLEGAL_STATE_CWSJR1085=CWSJR1085E: An internal error has occurred. A call was made to the method {0} after the connection was closed. The method cannot be called after the connection is closed. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . INVALID_PROPERTY_TARGET_SIGNIFICANCE_CWSJR1179=CWSJR1179E: The following target significance field on a JMS activation specification is invalid [{2}]. The values [{0}] or [{1}] are expected. During validation of the properties configured on a JMS activation specification, the target significance property was found not to be valid. Correct the value of the target significance property on the activation specification, then restart the server. EXCEPTION_RECEIVED_CWSJR1028=CWSJR1028E: An internal error has occurred. The exception {0} was received in method {1}. The included exception information can be used for diagnosis. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . EXCEPTION_RECEIVED_CWSJR1027=CWSJR1027E: An internal error has occurred. The exception {0} was received in method {1}. The included exception information can be used for diagnosis. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . EXCEPTION_RECEIVED_CWSJR1026=CWSJR1026E: An internal error has occurred. The exception {0} was received in method {1}. The included exception information can be used for diagnosis. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . EXCEPTION_RECEIVED_CWSJR1185=CWSJR1185E: An internal error has occurred during the validation of a JMS activation specification: {0}. During the validation of a JMS activation specification an unexpected exception was received. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . EXCEPTION_RECEIVED_CWSJR1022=CWSJR1022E: An unexpected exception has occurred during the call to the method {0}. An unexpected type of ConnectionRequest object, {2}, was received instead of {1}. An internal exception was created. The included exception information can be used for diagnosis. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . EXCEPTION_RECEIVED_CWSJR1021=CWSJR1021E: An internal exception was created. The exception {0} in method {1}. The included exception information can be used for diagnosis. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . EXCEPTION_RECEIVED_CWSJR1182=CWSJR1182E: An internal error. The following exception was thrown while attempting to obtain a utility class: {0} During endpoint activation the JMS resource adapter was attempting to obtain a utility class and an unexpected exception was received. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . INVALID_PROPERTY_TOPIC_CWSJR1193=CWSJR1193E: JMS activation specs using a destination type of topic must have a destination of type [{0}] but the destination passed was of type [{1}] During validation of the properties configured on a JMS activation specification, the destination was found not to be valid. Correct the value of the destination property on the activation specification, then restart the server. CREATE_UNCOORDINATED_TRANSACTION_CWSJR1461=CWSJR1461E: An internal error has occurred. Creation of an SIUncoordinatedTransaction failed with exception: {0} The service integration technologies JMS resource adapter was attempting to create an SIUncoordinatedTransaction to register in a transaction as a Synchronization when an exception was received. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . INVALID_PROPERTY_SHARE_DURSUB_CWSJR1197=CWSJR1197E: The following share durable subscription field on a JMS activation specification is invalid [{3}]. The values [{0}], [{1}] or [{2}] are expected. During validation of the properties configured on a JMS activation specification, the share durable subscription property was found not to be valid. Correct the value of the share durable subscription property on the activation specification, then restart the server. ON_MESSAGE_CWSJR1483=CWSJR1483E: An internal error occurred. The exception {0} was thrown while attempting to obtain an instance of the onMessage method. An exception was created during the attempt to obtain an instance of the onMessage method. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . CONNECTION_ERROR_RETRY_CWSJR1067=CWSJR1067E: The following JCA Connection error has occurred when trying to get the connection. The retrieving of the connection will be retried. The exception is {0}. An exception was created while obtaining a connection. The system will purge the connection, then attempt to obtain another one. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . INVALID_PROPERTY_SUBNAME_CWSJR1196=CWSJR1196E: The subscription name on a JMS activation specification must have a value when using durable subscriptions During validation of the properties configured on a JMS activation specification, the subscription name was found not to be valid. Correct the value of the subscription name property on the activation specification, then restart the server. DESTINATION_PREFIX_LONG_CWSJR1029=CWSJR1029E: The prefix {0} is longer than twelve characters. The prefix for temporary destination names cannot be longer than twelve characters. Specify a prefix that is twelve characters or less. INVALID_PROPERTY_QUEUE_CWSJR1192=CWSJR1192E: JMS activation specs using a destination type of queue must have a destination of type [{0}] but the destination passed was of type [{1}] During validation of the properties configured on a JMS activation specification, the destination was found not to be valid. Correct the value of the destination property on the activation specification, then restart the server. INVALID_PROPERTY_MAXCONC_CWSJR1198=CWSJR1198E: The maximum concurrency on a JMS activation specification must be given a postive value During validation of the properties configured on a JMS activation specification, the maximum concurrency value was found not to be valid. Correct the value of the maximum concurrency property on the activation specification, then restart the server. DESTINATION_PREFIX_LONG_CWSJR1025=CWSJR1025E: The prefix {0} is longer than twelve characters. The prefix for temporary destination names cannot be longer than twelve characters. Specify a prefix that is twelve characters or less. EXCEPTION_RECEIVED_CWSJR1161=CWSJR1161E: An internal error has occurred during initialization of the {1} class. Exception: {0}. The JmsJcaReferenceUtils class did not initialize. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . JMS_CONNECTION_FAIL_CWSJR1024=CWSJR1024E: An internal error has occurred. During the call to the method {0} an unexpected object of type, {2}, was received instead of {1}. An internal exception was created. The JmsFactoryFactory.getInstance() method did not receive a correct JMSRAFactoryFactory type as expected. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . INVALID_PROPERTY_ACKNOWLEDGE_MODE_CWSJR1190=CWSJR1190E: The following acknowledge mode on a JMS activation specification is invalid [{2}]. The values [{0}] or [{1}] are expected. During validation of the properties configured on a JMS activation specification, the acknowledge mode was found not to be valid. Correct the value of the acknowledge mode property on the activation specification, then restart the server. INVALID_PROPERTY_TARGET_TYPE_CWSJR1180=CWSJR1180E: The following target type field on a JMS activation specification is invalid [{3}]. The values [{0}], [{1}] or [{2}] are expected. During validation of the properties configured on a JMS activation specification, the target type was found not to be valid. Correct the value of the target type property on the activation specification, then restart the server. INVALID_SESSION_CWSJR1105=CWSJR1105E: An internal error has occurred. An attempt was made to start a local transaction when such a transaction already existed. It is not possible to start a local transaction if one already exists. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . INVALID_SESSION_CWSJR1104=CWSJR1104E: An internal error has occurred during the call to the method {0}. A {2} object was received instead of a {1} object. An object of the wrong type was received. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . EXCEPTION_DURING_INIT_CWSJR1441=CWSJR1441E: An internal error has occurred. Creation of the JmsJcaFactory object failed with exception: {0}. A problem occurred while creating the JmsJcaFactory object. See the accompanying error messages for further information. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . INVALID_PROPERTY_DURSUBHOME_CWSJR1195=CWSJR1195E: The durable subscription home on a JMS activation specification must have a value when using durable subscriptions. During validation of the properties configured on a JMS activation specification, the durable subscription home was found not to be valid. Correct the value of the durable subscription home property on the activation specification, then restart the server. INVALID_PROPERTY_DESTINATION_TYPE_CWSJR1189=CWSJR1189E: The following destination type on a JMS activation specification is invalid [{2}]. The values [{0}] or [{1}] are expected. During validation of the properties configured on a JMS activation specification, the destination type was found not to be valid. Correct the value of the destination type property on the activation specification, then restart the server. AUTHENTICATION_ERROR_CWSJR1117=CWSJR1117E: An internal error has occurred. The credentials passed to the method {0} did not match those passed to the constructor. The supplied credentials did not pass the authentication check. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . APPLICATION_AUTHENTICATION_EXCEPTION_1074=CWSJR1074E: The supplied user name, {0}, failed to be authenticated. An application used a resource reference to look up a connection factory. The resource reference was configured to use application-managed authentication, but the associated component authentication alias data was not valid. Ensure that the component authentication alias contains valid credentials for the bus. APPLICATION_AUTHENTICATION_EXCEPTION_1072=CWSJR1072E: The supplied user name, {0}, could not be authenticated. An application used a resource reference to look up a connection factory. The resource reference was configured to use application-managed authentication, but the application supplied credentials that are not valid. Ensure that the correct credentials are supplied when creating a connection. SICORECONNECTION_ERROR_CWSJR1066=CWSJR1066E: A valid SICoreConnectionFactory cannot be retrieved during a call to the method {0}. This exception is unexpected. The cause is not immediately known. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . APPLICATION_AUTHORIZATION_EXCEPTION_1076=CWSJR1076E: It was not possible to authenticate because no credentials were supplied. An application used a resource reference to look up a connection factory. The resource reference was configured to use application-managed authentication, but no component authentication alias data was specified. Ensure that an authentication alias is associated with this resource reference. UTILITY_CLASS_CWSJR1481=CWSJR1481E: An internal error. The following exception was thrown while attempting to obtain a utility class: {0}. During endpoint activation the JMS resource adapter was attempting to obtain a utility class and an unexpected exception was received. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . AUTHENTICATION_ERROR_CWSJR1103=CWSJR1103E: The credentials ({2}) passed to the method {0} did not match those passed to the constructor ({1}). The supplied credentials did not pass the authentication check. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . ME_NAME_REQUIRED_CWSJR1108=CWSJR1108E: A specific messaging engine must be specified to use JMS resources within a transaction. The connection property {0} must be set to {1}. To permit recovery of transactions, a connection factory must target a specific messaging engine in the bus. Change the connection factory property 'Target' value to the string value of the name of the target messaging engine, 'Target type' to the pull down value 'Messaging engine name' and 'Target significance' to the pull down value of 'Required'. APPLICATION_AUTHENTICATION_EXCEPTION_1069=CWSJR1069E: The supplied user name, {0}, failed to be authenticated. An application used a resource reference to look up a connection factory. The resource reference was configured to use application-managed authentication, but the associated component authentication alias data was not valid. Ensure that the component authentication alias contains valid credentials for the bus. APPLICATION_AUTHORIZATION_EXCEPTION_1071=CWSJR1071E: It was not possible to authenticate because no credentials were supplied. An application used a resource reference to look up a connection factory. The resource reference was configured to use application-managed authentication, but no component authentication alias data was specified. Ensure that an authentication alias is associated with this resource reference. INVALID_PROPERTY_SUBDUR_CWSJR1194=CWSJR1194E: The following subscription durability on a JMS activation specification is invalid [{2}]. The values [{0}] or [{1}] are expected. During validation of the properties configured on a JMS activation specification, the subscription durability was found not to be valid. Correct the value of the subscription durability property on the activation specification, then restart the server. ACTIVE_SYNCHRONIZATION_EXCEPTION_CWSJR1463=CWSJR1463E: An internal error has occurred. The managed connection {0} is already registered as a synchronization in a transaction. A call to getSynchronization has occurred when the managed connection is already registered as a synchronization in a transaction. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . INVALID_PROPERTY_READ_AHEAD_CWSJR1191=CWSJR1191E: The following read ahead value on a JMS activation specification is invalid [{3}]. The values [{0}], [{1}] or [{2}] are expected. During validation of the properties configured on a JMS activation specification, the read ahead value was found not to be valid. Correct the value of the read ahead property on the activation specification, then restart the server. EXCEPTION_RECEIVED_CWSJR1126=CWSJR1126E: An internal error has occurred. The call to the method {0} is not allowed because of the nonmanaged environment. The call is not allowed in an unmanaged environment. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . EXCEPTION_RECEIVED_CWSJR1122=CWSJR1122E: An internal error has occurred. During the call to the method {0} we expected to receive a {2} but received a {1} The connection manager is not lazy enlistable. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . EXCEPTION_RECEIVED_CWSJR1121=CWSJR1121E: An internal error has occurred. During the call to the method {0} the exception {1} was thrown. An unexpected exception was created when the session tried to re-associate itself with a connection manager. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . INVALID_PROPERTY_BUSNAME_CWSJR1187=CWSJR1187E: The bus name on a JMS activation specification must be given a value During validation of the properties configured on a JMS activation specification, the bus name was found not to be valid. Correct the value of the bus name property on the activation specification, then restart the server. EXCEPTION_RECEIVED_CWSJR1084=CWSJR1084E: An internal error has occurred during the call to the method {0}. A {1} object was found when a {2} object was expected. An object found in the set of sessions was not of the type required. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . INVALID_PROPERTY_MAXBATCH_CWSJR1199=CWSJR1199E: The maximum batch size on a JMS activation specification must be given a postive value During validation of the properties configured on a JMS activation specification, the maximum batch size was found not to be valid. Correct the value of the maximum batch size property on the activation specification, then restart the server. EXCEPTION_RECEIVED_CWSJR1083=CWSJR1083E: An internal error has occurred during the call to the method {0}. A {1} object was found when a {2} object was expected. An object found in the set of sessions was not of the type required. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . EXCEPTION_RECEIVED_CWSJR1082=CWSJR1082E: An internal error has occurred during the call to the method {0}. Exactly one session was expected but {1} sessions were found. The set of sessions in the connection has more than one session when there should only be one. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . TEMPORARY_CWSJR9999=CWSJR9999E: {0} If the message does not give sufficient information, see the accompanying error messages for further information. See the accompanying error messages for further information. EXCEPTION_RECEIVED_CWSJR1114=CWSJR1114E: An internal error has occurred. Exception: {0} in method {1} The included exception information can be used for diagnosis. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . EXCEPTION_RECEIVED_CWSJR1113=CWSJR1113E: An internal error has occurred. Exception: {0} in method {1} The included exception information can be used for diagnosis. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . EXCEPTION_RECEIVED_CWSJR1112=CWSJR1112E: An internal error has occurred. Exception: {0} in method {1} The included exception information can be used for diagnosis. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . EXCEPTION_RECEIVED_CWSJR1111=CWSJR1111E: An internal error has occurred. Exception: {0} in method {1} The included exception information can be used for diagnosis. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . EXCEPTION_RECEIVED_CWSJR1110=CWSJR1110E: An internal error has occurred. Exception: {0} in method {1} The included exception information can be used for diagnosis. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . INVALID_PROPERTY_CLIENTID_CWSJR1183=CWSJR1183E: The client ID field on a JMS Activation specification must be set During validation of the properties configured on a JMS activation specification, the client ID was found not to be valid. Correct the value of the client ID property on the activation specification, then restart the server. CONTAINER_AUTHENTICATION_EXCEPTION_1073=CWSJR1073E: It was not possible to authenticate using the supplied authentication alias, {0}. An application used a resource reference to look up a connection factory. The resource reference was configured to use container-managed authentication, but the associated authentication data was not valid. Ensure that the authentication alias associated with this resource reference contains valid credentials for the bus. EXCEPTION_RECEIVED_CWSJR1107=CWSJR1107E: An internal error has occurred during the call to the method {0}. A required SICoreConnection object was not found. A SICoreConnection object is required but cannot be found. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . EXCEPTION_RECEIVED_CWSJR1106=CWSJR1106E: An internal error has occurred during the call to the method {0}. A required SICoreConnection object was not found. A SICoreConnection object is required but cannot be found. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . EXCEPTION_RECEIVED_CWSJR1102=CWSJR1102E: An internal error has occurred. The exception {0} was thrown. The call to the lazyEnlist method on the connection manager was not successful. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . EXCEPTION_RECEIVED_CWSJR1101=CWSJR1101E: An internal error has occurred during the call to the method {0}. The connection failed because a {2} object was found when a {1} object was expected. The request information is not of the correct type. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . WLM_CLASSIFIER_REG_CWSJR1186=CWSJR1186E: An internal error has occurred during the registration of the WLM classifier for the JMS resource adapter: {0}. During the registration of the WLM classifier for the JMS resource adapter with the handler registry, an unexpected exception was received. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . EXCEPTION_RECEIVED_CWSJR1065=CWSJR1065E: An internal error has occurred. The exception {0} was received in method {1}. The included exception information can be used for diagnosis. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . EXCEPTION_RECEIVED_CWSJR1064=CWSJR1064E: An internal error has occurred. The exception {0} was received in method {1}. The included exception information can be used for diagnosis. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . EXCEPTION_RECEIVED_CWSJR1061=CWSJR1061E: An internal error occurred in method {0}. A valid connection was not created; the object {2} was received instead of {1}. This exception is unexpected. The cause is not immediately known. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ . CONTAINER_AUTHENTICATION_EXCEPTION_1068=CWSJR1068E: It was not possible to authenticate using the supplied authentication alias, {0}. An application used a resource reference to look up a connection factory. The resource reference was configured to use container-managed authentication, but the associated authentication data was not valid. Ensure that the authentication alias associated with this resource reference contains valid credentials for the bus. SICORECONNECTION_ERROR_CWSJR1023=CWSJR1023E: An internal error has occurred. A valid SICoreConnectionFactory cannot be retrieved during a call to the method {0}. This exception is unexpected. The cause is not immediately known. If the problem persists, additional information might be available if you search for the message ID on the following Web sites: WebSphere Application Server Support page: http://www.ibm.com/software/webservers/appserv/was/support/ WebSphere Application Server for z/OS Support page: http://www.ibm.com/software/webservers/appserv/zos_os390/support/ .