MOC_UnkIbmNurs=ARFM4111I: Generational garbage collection is in use in an IBM JRE, but the nursery size limit is not known exactly; assuming {0} kilobytes. The autonomic memory overload protection controller is unable to determine the nursery size limit. Either accept the assumed value, set the maxNonFullGcMemoryRelease custom property on the cluster, or use a non-generational collector. MOC_ODCErr=ARFM4113E: The memory overload protection controller suffered an unexpected error when looking up the local process in the On-Demand Configuration facility: {0} On-Demand Configuration is used to convey the memory overload protection control settings from the local process to the On-Demand Routers; because of this failure, the control settings will not be automatically updated. Report to IBM. MOC_IBMGcUnknown=ARFM4102W: Fail to load the JVM arguments on IBM JVM. {0}. Some JVM internal call may be changed. Common memory overload protection method will be used. No action required. MOC_UnkVendor=ARFM4112I: Generational garbage collection is in use in a non-IBM JRE, but the nursery size limit is not known. The autonomic memory overload protection controller is unable to determine the nursery size limit. Either accept that explicit garbage collections will not be suppressed by ones initiated by the collector, set the maxNonFullGcMemoryRelease custom property on the cluster, or use a non-generational collector. MOC_Parm_GcDt=ARFM4104I: Absent an override via the explicitGcPeriod cluster custom property, autonomic memory overload protection will wait {0} seconds between explicitly triggered garbage collections. Autonomic memory overload protection will explicitly trigger a garbage collection when the memory usage is high, unless this function is disabled or a full garbage collection has been done too recently. If the chosen interval is not good, set the explicitGcPeriod custom property on the cluster to indicate the desired interval; a value of zero disables this function. SCP_Disabled=ARFM4083I: The SIP statistics gatherer for autonomic request flow management is disabled. This reports that autonomic request flow management will NOT be applied to SIP messages coming in to this process. No action required --- unless that management was expected, in which case check the configuration and report to IBM if there is a problem. SCP_MemDisabled=ARFM4085I: Autonomic memory overload protection is disabled. The memory protection parameter used by WLM will NOT be set autonomically No action required. WDFL_SetDlgAuxFail=ARFM4061E: An Error occurs when setting DialogAux; data is {0}, and the exception is {1}. An Exception occurs when setting DialogAux. Report program defect to IBM. MOC_ODCInitFailed=ARFM4101E: ODC initialization failure: {0}. Internal failure. Report to IBM. MOC_Parm_Nurs=ARFM4108I: Absent an override via the maxNonFullGcMemoryRelease cluster custom property, autonomic memory overload protection will figure a full garbage collection has happened when more than {0} kilobytes have been freed. Autonomic memory overload protection will explicitly trigger a garbage collection when the memory usage is high, unless this function is disabled or a full garbage collection has been done too recently; when a generational garbage collection technique is in use, a full garbage collection is detected when the memory usage drops by more than a lesser collection can free. If the chosen value is not good, set the maxNonFullGcMemoryRelease custom property on the cluster to indicate the critical amount of freed memory; a value of zero means every collection is deemed full, and a huge value means no collection (except those explicitly initiated by the protection function) will be deemed full. MOC_Parm_NursNever=ARFM4110I: Absent an override via the maxNonFullGcMemoryRelease cluster custom property, autonomic memory overload protection will assume no garbage collection is a full one. Autonomic memory overload protection will explicitly trigger a garbage collection when the memory usage is high, unless this function is disabled or a full garbage collection has been done too recently; when a generational garbage collection technique is in use, a full garbage collection is detected when the memory usage drops by more than a lesser collection can free. If the chosen value is not good, set the maxNonFullGcMemoryRelease custom property on the cluster to indicate the critical amount of freed memory; a value of zero means every collection is deemed full, and a huge value means no collection (except those explicitly initiated by the protection function) will be deemed full. SCP_MemEnabled=ARFM4084I: Autonomic memory overload protection is enabled. The memory protection parameter used by WLM will be set autonomically No action required. WSCP_GENLERR=ARFM4899E: Something unexpected happened in ARFM; data is {0}, and the exception (if any) is {1}. Something unexpected happened. Debug it if you can, using the information provided, or contact IBM support. MOC_ThreReportErr=ARFM4103E: Importance threshold report failed. Server: {0}. Exception: {1} ODC may occur some error. No new importance threshold will be transmitted till it recovers. Report to IBM. MOC_GCTrig=ARFM4114I: The memory overload protection controller explicitly invoked a garbage collection (GC) at {0}; the previous detected major GC was at {1}, and the configured minimum time between explicit GCs was {2} seconds; the last time a heap usage sample was below {3} was {4}; the number of HTTP admissibility tests was {5} and {6} passed, and the choke fraction is {7}; the number of SIP admissibility tests was {8} and {9} passed, and the choke fraction is {10}; it is {11} that the garbage collector values throughput over pause times. When collector values throughput over minimizing stop-the-world times, it improves the accuracy of the memory usage estimate. Otherwise, it only happens under urgent condition: the admission fraction of new dialogs is too small, so that it is hard for the collector itself to trigger a full GC to release the garbage in memory. No action required. MOC_Parm_MemBasic=ARFM4107I: The maximum heap size is {0} bytes; the low threshold for memory overload protection is {1} bytes and the high threshold is {2} bytes. This message reports the basic parameters of the memory overload protection. Change the configuration if desired. MOC_Parm_GcDtOff=ARFM4105I: Absent an override via the explicitGcPeriod cluster custom property, autonomic memory overload protection will not explicitly trigger garbage collections. Autonomic memory overload protection will explicitly trigger a garbage collection when the memory usage is high, unless this function is disabled or a full garbage collection has been done too recently. If the chosen interval is not good, set the explicitGcPeriod custom property on the cluster to indicate the desired interval; a value of zero disables this function. MOC_GCTrig2=ARFM4115I: The memory overload protection controller explicitly invoked a garbage collection (GC) at {0}; the previous detected major GC was at {1}, at which time the heap utilization became {2} percent, which is above the threshold of {3} percent; the configured minimum time between explicit GCs was {4} seconds; the number of HTTP admissibility tests was {5} and {6} passed, and the choke fraction is {7}; the number of SIP admissibility tests was {8} and {9} passed, and the choke fraction is {10}; it is {11} that the garbage collector values throughput over pause times. When collector values throughput over minimizing stop-the-world times, it improves the accuracy of the memory usage estimate. Otherwise, it only happens under urgent condition: the admission fraction of new dialogs is too small, so that it is hard for the collector itself to trigger a full GC to release the garbage in memory. No action required. MOC_Parm_GcDtRel=ARFM4106I: Absent an override via the explicitGcPeriod cluster custom property, the time between explicit garbage collections for the purpose of memory overload protection will be relative to the configured time between successive settings of the memory overload protection control value in the On-Demand Configuration facility. Autonomic memory overload protection will explicitly trigger a garbage collection when the memory usage is high, unless this function is disabled or a full garbage collection has been done too recently. If the chosen interval is not good, set the explicitGcPeriod custom property on the cluster to indicate the desired interval; a value of zero disables this function. SCP_GetQTIFail1=ARFM4081E: An unexpected runtime exception occurred while initializing the SIP statistics gatherer for autonomic request flow management: {0}. This should not happen. Report program defect to IBM. QTI_SetQTIListenerFail=ARFM4001E: An Error occurs when setting QTI listener; data is {0}, and the exception is {1}. An Exception occurs when setting QTI listener. Report program defect to IBM. QTI_ODCInitFailed=ARFM4002E: ODC initialization failure: {0}. Internal failure. Report to IBM. MOC_Parm_NursAlways=ARFM4109I: Absent an override via the maxNonFullGcMemoryRelease cluster custom property, autonomic memory overload protection will assume every garbage collection is a full one. Autonomic memory overload protection will explicitly trigger a garbage collection when the memory usage is high, unless this function is disabled or a full garbage collection has been done too recently; when a generational garbage collection technique is in use, a full garbage collection is detected when the memory usage drops by more than a lesser collection can free. If the chosen value is not good, set the maxNonFullGcMemoryRelease custom property on the cluster to indicate the critical amount of freed memory; a value of zero means every collection is deemed full, and a huge value means no collection (except those explicitly initiated by the protection function) will be deemed full. WSCP_GENLWRN=ARFM4898W: Something suspicious happened in ARFM; data is {0}, and the exception (if any) is {1}. Something suspicious happened; this may or may not indicate an error. Debug it if you can, using the information provided, or contact IBM support. PQ_DlgAuxFail=ARFM4021E: An Error occurs when getting or setting DialogAux; data is {0}, and the exception is {1}. An Exception occurs when getting or setting DialogAux. Report program defect to IBM. SCP_Enabled=ARFM4082I: Initialized the SIP statistics gatherer for autonomic request flow management. This reports that autonomic request flow management will be applied to SIP messages coming in to this process. No action required.